tall antennae?

Quote:

---

Originally Posted by aka_NSX

try to contact tinkerbell @ the clubitr, he has about 10 pieces coming in only $67 + Aus delivery or pick up in sydney

this is the link : clubITR

---

i WAS going to be getting 10 and selling for $67 + local delivery...

Rasputin and/or Stanly - have you ordered yours????

i think rasputin has ..i didn't end up doing it :):)

i got one already lol

Ordered.

Will be doing a similar price. No higher, anyway.

Should be a week or so. I'll start a thread once they're here, and if there's a bigger demand than I thought it won't take too long to get a second batch, but I just didn't want to be left out of pocket with a pile of antennae :P

cool, as long as neither of us ends up with a pile of antenna - that is the main thing...

can you PM me when you get them in? thanks!

Quote:

---

Originally Posted by stanleym

i did the exact same things when i had my old deck its a very easy thing to do...... now coz ur antenna works on the same line as the remote etc... goes on and up when the car gets turned on..... u need to apply the switch further down the track.......

ill try explain this the best i can of maybe include a good old paint pic

http://i48.photobucket.com/albums/f2...untitled-2.jpg

now as you see the remote and antenna are the same until they spilt to go there seperate ways..... the remote wire goes back to the ignition section wheras the antenna goes to the motor to say go up or down (depending if there is power of not)

If you can follow the wire and work out which the antenna one is when it has split from the remote... u attach the switch in that spot.... this allows you to control when u want the antenna up or down even when the radio is on etc.....

What i did to work out which wire was right (this beiing in my dc2) was to look at the wire from where the antenna motor then had a look down the side of the car i think it was the driver side under the carpet ... where u feed rca's etc......

anyway i did that and followed it back to the antenna motor to make sure it was right.... (i was looking for the same wire colour combination......)

then i cut the wire installed the switch and worked great !! since then i changed to the s2000 antenna and changed headunit so no need fore the switch to be inplace....

hope this helps u a lil bit :):):):)

and in answa to stealing the s2000 thing.. they can steal just the antenna bit itself but not the whole base and wiring loom as that is screwed in from under boot..... not many people would know it can be unscrewed either.. but if u got fears unscrew it and put it in ur car when u park somewhere :):)

---

another thing which place said it coudn't be done.. they must've known about it...

Just letting anyone watching this thread know, The antennae arrived today. Expect a for sale thread tomorrow, will contact the users who have asked for one already, they have dibs.

But in the meantime, I'm going to work, and will be putting together my DIY to go along with the FS thread.

So there are only 9, since I used one on my car (obviously) you'll want to get it quick.

i was going to do a DIY for the ClubITR boys, can we borrow yours once done?

BTW - i am in for one please :)

I put my name down a few pages back, please don't forget me! :wave:

sounds good rasputin :)

Considering Tinkerbell didnt plan a groupbuy on CITR, I'm down for one.
I think I've placed my name down a few pages back, or it was another thread.