Mine aren't in great condish. They work though. :PQuote:
Originally Posted by grifty
Printable View
Mine aren't in great condish. They work though. :PQuote:
Originally Posted by grifty
Got any close up pics? I have no idea how they even look like, would be great so i can make my own :)
I might be able to grab some tomoz. Basically it uses the same bolts as the bumper support, it just gets sandwhiched between the bumper support and the bulk head.
If all you grabbed from the EF is what's in the pic, then you still need another part of the bracket that's probably still bolted to the car.
I just did a quick shoopdewhoop, this is what makes the magic happen:
http://i109.photobucket.com/albums/n...ps31d57fae.jpg
Cheers for the pic!
These are the ones correct (pic taken from the net)? The EF2 never had those, only these ones which are held on with a few welds onto the bumper support.
http://i44.tinypic.com/2yjt0tw.jpg
This is the EF2 bumper support
http://i43.tinypic.com/a5jmmt.jpg
http://i44.tinypic.com/hu0k2f.jpg
And this is the Concerto one, you see how the mount to the chassis is alot further back compared to the EF2.
http://i40.tinypic.com/35ch9ae.jpg
here it is with the bolt mounting face lined up with the Concerto one, you can see how the top part is not even close to the bumper support
http://i41.tinypic.com/2mczhh4.jpg
Oh i understand. Yeah i haven't seen those brackets before to be honest.
The correct brackets could be easily duplicated though. I might even be able to get one made for you.
that the one
finally got around to fitting my 'old' Spoon Steering Wheel.. with Spoon Boss kit for EF9..
http://i89.photobucket.com/albums/k2...psca388efa.jpg
http://i89.photobucket.com/albums/k2...ps0235c1f9.jpg
removed dash, dash and engine harness, and continued cleaning up the bay on the sedan.
Also did a coolant flush and replaced coolant on the hatch
http://i225.photobucket.com/albums/d...ps1063c873.jpg
http://i225.photobucket.com/albums/d...ps5aa03fc2.jpg
http://i225.photobucket.com/albums/d...ps3e1775af.jpg
ohssshiiiiiiiii
do i smell a shaved bay?
Hahaha wow deja vu!!Quote:
Originally Posted by markismaximus
Are you towing it to vic to put on the boat for me lolQuote:
Originally Posted by CivicEGSI
Someone finally bought it?
For you guys with facebook, I will be posting my build thread/what i do onto this facebook page. Just hit like on the page and you will get automatic updates on your newsfeed :D
https://www.facebook.com/media/set/?...9138761&type=3
who wants to come by and take out my ed6 wiring and chuck in the crx wiring? its all plug and play. i just dont know whats the go.
needs more updates ayQuote:
Originally Posted by doublewhat?
I got some sweet pics that would make a good update for it?Quote:
Originally Posted by grifty
yes!! and the EF2 if you have any?Quote:
Originally Posted by ~Sp33~
Yeah throw em up here or into my fb inbox if you like!Quote:
Originally Posted by ~Sp33~
hi driftyQuote:
Originally Posted by grifty
Took of my stock cat and now it sounds like a RALLY CAHH
The pics aren't great but they're somethin:
http://i109.photobucket.com/albums/n...pse3c1a8d1.jpg
http://i109.photobucket.com/albums/n...ps32f11da7.jpg
http://i109.photobucket.com/albums/n...ps5879019b.jpg
http://i109.photobucket.com/albums/n...ps71f1b690.jpg
http://i109.photobucket.com/albums/n...psf7f80c46.jpg
http://i109.photobucket.com/albums/n...ps2757a362.jpg
http://i109.photobucket.com/albums/n...psa0ad7835.jpg
http://i109.photobucket.com/albums/n...ps19aebaac.jpg
I purchased a car cover for my ed9 crx and threw it on finally - now she's resting in the garage, while i play around with different daily's.
shiiii, so many brown sedans around....
Yeah mang. Time for new car yayQuote:
Originally Posted by ~Sp33~
Something classy this time? A sedan maybe?Quote:
Originally Posted by CivicEGSI
Thats Steve! their better quality than any of the photos ive ever taken of her! LOLQuote:
Originally Posted by ~Sp33~
Haha it's definitely in the books. Everything is up in the air at the moment though so I don't even know if I will stay honda or not. But It will be interesting!Quote:
Originally Posted by ~Sp33~
anyone know whatd some good ed6 exhaust? will be running b16a with plm ta headers
5Zigen. Have it on mine and it works nicely
Had one of my crxs leave the road on sat
put in some yellowspeed coilovers the other day. ride isnt too bad.
can anyone recommend me any camber kits? I have the urge to slam this thing.
Installed a camber arm and a on the front left hand side.
I will go chuck a coilover and camber arm in the other side tomorrow.
Quote:
Originally Posted by Renaissance_x
Hard race works for me.Quote:
Originally Posted by ouch
I have skunk2 and they work very well, u think hard race may have taken some of their design from skunk2Quote:
Originally Posted by Renaissance_x
If you want to go low then hard race isn't for you.
the eg/dc2 one will work? i cant seem to find a specific ed/ef version.
No EG/DC2 upper control arms are a completely different shape. If you want to go low you don't want adjustable camber arms, as their additional bulk means they'll smack into the suspension tower more so than the OEM arms.Quote:
Originally Posted by ouch
As far as I know the hardrace EF/ED front upper control arms are discontinued.
From what I have heard is that skunk 2 need to be cut to avoid smacking into the strut tower and hardrace don't
I may be confused though.
Also for crx you have to ask for hardrace, skunk2 or ebay shit to the best of my knowledge when it comes to camber.
you can also get SPC offset balljoints.
i tried to fit my f7 dc2r lcas but they wouldnt slide on to the body properly. might need to remove the welded looking ginky bit pr take off the rear muffler to try and send the bolt through.
anyone else had this problem?
is it too wide? You shouldnt have and issue, maybe try greasing it up.
etch primed and black wrinkled for that OEM look... so fresh
http://i225.photobucket.com/albums/d...ps7b3ae11d.jpg
http://i225.photobucket.com/albums/d...ps24fae3c6.jpg
Need more pics of the car its going into :)Quote:
Originally Posted by markismaximus
lol. if I took any you wouldn't be able to see it through all the dust.... just a shell atm. things have been moving pretty slow on it.Quote:
Originally Posted by grifty
Steve sent me some photos of Tims? sedan. Paint on it looks great
satin black looks pretty sexyQuote:
Originally Posted by markismaximus
cot daym
Regardless still post pics :PQuote:
Originally Posted by markismaximus
Yeah his paint came out sick! Really nice colour choice
any guesses ;)
http://i225.photobucket.com/albums/d...ps0095ce15.jpg
Looks like a umm..........
Buying another one :D
next step.
Still no guesses!?
http://i225.photobucket.com/albums/d...ps642664d9.jpg
subbed
Slow thread progress is slow brah
https://farm6.staticflickr.com/5525/...95b3108a_z.jpg
Got mine running a couple of days ago.
sweeeet. Looks like you keep it in a lair.
I modded that ALT pulley this morning, all sweet. So no frame rail bashing required.
Good news! I'd bash it anyway for more clearance :PQuote:
Originally Posted by markismaximus
thats always the first impression, then you realise you need more clearance once everything is bolted up lolQuote:
Originally Posted by markismaximus
everything is bolted up, for test anywayQuote:
Originally Posted by grifty
needs more pics!
But once you tighten that last valve cover bolt, suddenly your alt doesn't clear anymore.Quote:
Originally Posted by markismaximus
#hondaphysics
couple more process pics.
the start
http://i225.photobucket.com/albums/d...ps33beb10a.jpg
mostly done
http://i225.photobucket.com/albums/d...psa75a2fe8.jpg
complete
http://i225.photobucket.com/albums/d...psa4b98647.jpg
Looks like a wet wipe.
a firewall shaped wet wipe :eek:Quote:
Originally Posted by ~Sp33~
so its some part of the firewall, im guessing for a hydraulic conversion?
yep, that's itQuote:
Originally Posted by grifty
Wrong thread m8Quote:
Originally Posted by damiencabral
Just picked this up today, just want to clean her up and then I'll decide where I want to go engine wisehttp://tapatalk.imageshack.com/v2/14...5d592e6c86.jpg
I've had an em1, currently driving an ep3 type r but always wanted a little project car and now I got one :)
Have ordered a new skunk2 radiator for my ed9, half size dual core 😀 should come from the states late next week!
damn those headlight and bonnet protectors pull a premium, almost as much as the car itself lol
Haha and I was thinking of taking them off originallyQuote:
Originally Posted by grifty
I'd be glad to take them off your hands ;)Quote:
Originally Posted by latinstyle69
lowball imminentQuote:
Originally Posted by grifty
Haha well if I decide to ill let you know firstQuote:
Originally Posted by grifty
I will offer 200 more
Lol
I took a black and white photohttp://tapatalk.imageshack.com/v2/14...2e4148fd22.jpg
So I haven't really had time to do anything to it but today I had some free time and decided to clean up the headlights, and then paint around the housing black to give a deep finish
http://tapatalk.imageshack.com/v2/14...5d3dae9c67.jpg
Then I've been deciding to make the headlights yellow or not so I tinted one of them
http://tapatalk.imageshack.com/v2/14...8da0846133.jpg
I didn't have enough tint for the second headlight but thought this would help me decide, what do you guys think?
http://tapatalk.imageshack.com/v2/14...5d2bca1c16.jpg
http://tapatalk.imageshack.com/v2/14...592060db85.jpg
Looks really shit. Looks like they were plastic headlights that've spent 30 years perishing in the sun and they've gone yellow.
I spent yesterday arv doing some things...
https://farm4.staticflickr.com/3952/...3f7462fc_z.jpg
Lol yeah ok, I don't mind it but won't be doing it
Saw your car at Charlie's
(Y)Quote:
Originally Posted by latinstyle69
Clear lights make it look much cleaner, and you can never get the amber of the indicator to match the 'yellow'.. But that's my opinion!
Yeah that's true man, I'm just playing around with little things first, but want to get a front lip and get the front n rear bar painted n any other areas that need a touch