did that front lower bar end up fitting, or still wouldnt clear?Quote:
Originally Posted by Spoon DA9R
Printable View
did that front lower bar end up fitting, or still wouldnt clear?Quote:
Originally Posted by Spoon DA9R
I'll do another for ya's without the 9 & ->Quote:
Originally Posted by EKVTIR-T
Cbf tonight... I'm half pissed & about to go out... check back tomorrow with a new design for you fellow
da boyz......
My drunken attempt.
http://i28.tinypic.com/nzgm8i.jpg
http://i30.tinypic.com/e8mvmf.jpg
pritty sweet for drunken
oath lol
didn't fit hahaQuote:
Originally Posted by ACTI0NMAN-1
Do you think these for $425 with 85-95% tred is wearth it, there going on a black da lowered so im guessing the black and silver would look nice? anyone have any other opinions?http://i280.photobucket.com/albums/k...y89/2211_1.jpg
^ Scotty wrong wheels imo for a DA9........
Price is nice but don't suit a DA9
hmmmmm, well im getting them tonight, will take a pic of them for ya..just liek the two tone black and silver as my cars black :).....but yeh will show ya a pic once there own:)
i can allways take the tyres off as there new sell the rims and get different ones:)
i like the black spokes..not the chrome part...
its all personal taste...its cheap so if u dun like them can always sell them again
i could allways make it different ans spray the chrome? but then again they might look wierd then...
finally got this part ready to be installed today...bloody over $300 just for this little piece of hub....sign...
http://i37.photobucket.com/albums/e6...2052008030.jpg
http://i37.photobucket.com/albums/e6...2052008032.jpg
Why so expensive? I hope it's OEM.
it is..genuine from honda.....and its for a dc2r...
and since while the back was being worked on...i did this...mite do the back nxt week..when i could be stuffed
http://i37.photobucket.com/albums/e6...R/DSC01395.jpg
looks sick man...
Well i got the rims home squishy, 4 17's with 3 suit cases 2 girls and me plus shopping bags this arvo! And they look rather nice (although the car could lose another inch or so on its high as low isnt enough) but still the black and silver look nice....it aint liek chrome its just sorta silver ....looks rather good IMO (pic of them is on page 34 if u dont no wat im talken about) and for 400 with 95% tred BARGAIN!
also what the rules with 17's on DA's....illegal i suppose? also wats the fine (unlesss i said they came with the car?)
I know that anything over 2inches larger or smaller is illegal in NSW... Id assume it would be a similar law with Vicroads, but you never know :)
on the topic of gauges... my rice gauges
cant see much.. shitty camera phone
http://img.photobucket.com/albums/v1...K/25052008.jpg
^ Shit there bright... looks good imo... do they illuminate white or green?
ye they look frkn awesome dude
theyre not really bright.. its the camera phone
plus you can dim them till they are switched off just like your normal lights
theres a switch for 2 colours, a greeny colour or a blue/white colour.. (that pic is blue)
Here's another seeming the others liked the this style, but without the 9 & arrow.
http://i31.tinypic.com/fmutr5.jpg
http://i31.tinypic.com/9rqfxs.jpg
Thats it for me... If someone wants any others done (anything) send us a PM.
I've kept all the other one's I've done... if some in melb wants them to
take to a sign writer etc to get them in sticker form just let me know.
nice work jarkz, i like your style.
Took this pic with the phone so its not to great...but here are the wheels i put on the integra (yes i will get tinted windows to!), just seeing wat people think of them as 1 said they were the wrong looking ones for the car :P the car doesnt lok very low (only got low springs) but the slant its on makes it look a lil higher then it is.
http://i280.photobucket.com/albums/k...6052008003.jpg
i dont seem to think so, they aint looken to bad? you can really tell as the pic aint that great also the angle aint great but ahwell see what you think!
eww
i dont think they suit
but to each their own
its the pic. and how close up the pic is...looks better in person
i cant get a dizzy/coils to last more then a month so looking at an msd ignition set up
what will i need and approx. how much will it cost?
american ebay, there like 80 buy now and wouldnt be that much posted.
http://www.youtube.com/watch?v=JVNn2...eature=related
dun ask me how i stumble across this
any where in australia apart from ebay?
isnt msd an american brand?
i got mine for 90 bucks delivered msd ignition upgrade for external coil..
u will need a ballast resistor aswell its only a .8ohm resistor that u can get from a auto shop
on the wheels i like them very good
i dont think integras r really sort after im sure if u lied and said they came out stock with 15s u will b fine thats all im doing
yeh its american
Hi, I'm new to this forum and thought i should post my question here.
I just bought a 1990 integra ls and i've been told by the seller that the gear box is stuffed and needs replacing. How much money am i looking at in order to replace an old gear box for this car? has anyone done this before?
any help would be great! thanks.
i'm planning to call hanny's performance for a quote tommorrow, i think they're my specialised local honda fixers ?
- also he said the two front CV's needed fixing, any idea on this?
sorry im not so car smart xD
CV's are around $90 each to purchase
cool thanks,
any ideas on the cost of replacing the gearbox?
probz like 400$ maybe less maybe more... unless u get a good deal ay?
ahh thanks,
i just called hanny's performance and i spoke to a guy named robert and he told me to replace a gear box would require him to find a second hand one costing($800) or get a newone($1200) and than to install it ($350) totalling around($1150 - $1550) i think this sounds a little pricey but i've never replaced a gear box before so i dont know.
He also told me the cv joints would cost $200 each.
so what do you guys think about the pricing? is it cheap too expensive? is there a better place to go? i'm located in sydney south west area around fairfield-cabramatta region.
thanks for your help!
i think your being ripped off, get multiple quotes off different people, tehn wen u call up arouond u can say uve been qouted $XXX can you do better etc.. sounds abit much man.. 1200 for a gear box?
yeh id want a new one for that aswell :P
1200 for a gearbox and labour sounds about right.
average price for a b18a LS man gearbox is about $800 and that inc. changeover.
a gearbox, thats such a rip
Just wondering...are u guys serious about the sticker? i know i was gonna get them made up and see..but its gonna be the same as the pics so dun wanna waste my friends effort...
so as soon as we decide on the design i'll get it made straight away...if no more contributions i m just choose which ever one I like..LOL
i wouldnt mind one, i just wouldnt mind seeing wat they look like on the car window! tinted and non tinted:P
ill have one for sure
maybe we should keep on topic of da9s though and chuck all the stickers on some other thing like a new thread for it or something...
just an idea
Does anyone know where to get a new non-vtec rocker cover for a '90 da9 integra?
ebay, wreckers, here
i dont have one but id like one to swap
we could get a slut rocker cover for people who wana paint theres we could do a exchange system
anyways i put my new rims on today... only drama now is it feels like a 4wd
http://aaron.iconiancds.com/pictures...g/P1010151.jpg
http://aaron.iconiancds.com/pictures...g/P1010152.jpg
http://aaron.iconiancds.com/pictures...g/P1010153.jpg
I reakon i got a spare 1 from a B20, PM me an offer if your keen.Quote:
Originally Posted by 154kjf
pwah get that lowered! also re spray ur bonnet and boot :P but nice wheels!
yeh its a work in progress.. im going two tone from the windows up black...
i have a new hatch aswell with a little spoiler that the early 2nd gens had..
i have new tail lights and halo headlights and a body kit... its all time
i membered y i came bak on here (was to find some springs :P)
anyone wana go halves in this?
http://cgi.ebay.com/ebaymotors/90-93...mZ190225275543
reason i ask is i have new front rotors and pads but i just want the rears...
otherwise i got brand new (been on for like 2 months front rotors (seen in pic) i duno if anyone would b interested in buyin them off me)
id perfer someone from perth but
man i wouldnt mind buying the ebay ones myself if theres another set:P
yeh there is there on there all the time
there us but
theres heaps for like 119 including postage, u recon there any good.
http://cgi.ebay.com/ebaymotors/ws/eB...231371203&rd=1
at the end of the day its only a bit of steel u sandwich to stop
so i dnt think the rotors matter its more the pads to b concerned about
not true... quality of the material of the rotors matters. how they react with heat etc... determines how they perform... or notQuote:
Originally Posted by A-man
whats the difference in mild steel???
my rotors r mild steel the factory ones r... i dnt think anyone else makes them any different
i love the design nd will take one as well, for sure! get it done and i will pay.Quote:
Originally Posted by Spoon DA9R
guarantee!
yeh i like it... is it posible to get them to match colours of the cars?
ie. burgandy and black, white and black, black and black LOL. etc.
http://www.ozhonda.com/forum/showthread.php?t=91734
here u go boys...
i put my msd ignition upgrade for external coil on...
very VERY easy job and took bout a hr coz i was piss farting around...
u dnt need a ballast resistor for it because the feed for it is already restricted...
plus if anyone needs one i got an internal coil spare now... i dont no what there worth but its there if anyone needs it
DA9 Here.
Cool.Got a pic?Quote:
Originally Posted by sheppsz
How long you had it?
Intro'd yourself yet?
lmao yeh short and sweet lmao
my temprature gauge goes to cold after driving for awhile (say 20-30 minutes, with a lil high reving but not redlining) i had recently had a lil crash and had the front fixed this could have effected it...but when i start the car and drive it sits at normal temprature then goes down...i had a radiator put in to...
Usually when the gauge plays up its the thermostat.Quote:
Originally Posted by thescotty
Changed mine and the temp read fine again.
mite b the sender...
r u using water?
if ur talking about water in the radiator, the repaires or dad put the coolant and water in (well atleast i hope he put water in..i an see coolant i the radiator and not sure if water is i to) and as far as the thermostat, how much was it?
Forgot.Quote:
Originally Posted by thescotty
You can get ryco or other aftermarket brands but its best to stick with a genuine one from Honda.
I have the receipt somewhere.If I find it I'll let you know otherwise just give em a buzz and ask for a price.
Eastern Honda at Doncaster is 9856 1333
Ringwood Honda 9262 6666
cheers mate will do that tomoz but in the mean time is there any way i can check to see if its not that before i waste money, there maybe something else just lil.
You can test thermostats by putting them in hot water to see if they open.Quote:
Originally Posted by thescotty
Hey DA Boyz...
I have a CD5 lip for sale...
I'm not sure what $ there worth 2nd hand?
Any suggestions?
PM me with your offers...
I reckon they look the goods on a DA...
http://i31.tinypic.com/358c300.jpg
wot looks gd! tempting me...
i reckon that actually looks pretty good on there
pm sent about the bar jarkz!
are these the 2 bolts i need to take out to get the thermostat out? or is there anything else i should know before doing so? cheers guys
http://i280.photobucket.com/albums/k...9/05062008.jpg
The thermostat is on the lower radiator hose not upper - what you've circled is just the water outlet of the head. Unfortunately it's a lot more difficult to get to.
no shit i located it, after i had lost all my coolant from that, i trial and errored (now im down a coolant bottle, and running water with not much coolant atm till i get another one:s) and yeh it seems hard to get a screw driver in to undo the bolts:s