93' H22A Build

Haha yea i wana find out what the hec he was smoking cos i want some :D

Quote:

---

Originally Posted by Wru

Regardless, it won't get any benefits without a proper tune/replacing some interals such as more aggro cams, all you'll do by changing the crossover point is stuff things up and probably lose power, the engines designed with a certain vtec engagement point which is based off the components and current tune of the engine such as the profile of the cams, the tune it is currently set to etc.

---

^This
As long as your ECU aint tuned for that exact crossover, ur car will run lean and you will loose power, running lean will make your engine suffer, also your wallet int the end. If you want lower VTEC engagement, get a tunable ECU and have it retuned as for your wishes. Could be everywhere from p28 with Chrome, Neptune, Hondata to a simple piggyback. Hondata IMO is a bit overkill tho for this kind of build.

VTEC controllers should only be put in a car with at least some kind of tuning device, cheapest route is a piggyback wich probably would work gor your build. but best way is an tunable ecu.

why not just go and get a hondata s100? their basic!

Thanks for the info H22. Vtec controller is now out of the list :) and hopefully il find a cheap hondata s100 when I'm in need of one..

A picture taken on the M4: :)
http://m.flickr.com/photos/72102617@...6885/lightbox/

no problem.
Or you just looking up a chipped p28 and uses any of NepTune, Crome, eCtune, Uberdata wich will be just as good or even better than hondata s100 with your setup. It doesnt really matter in this case, just to choose one that your nearest tuner can handle the best.

Who won? ;)

Before any chips I wana find a full exhaust system :)
Update; the system is finally completed after waiting 1 month to get my faulty amp fixed !

Who do you think ? V12 vs Vtec ;)

Sweet!

Hah! I was hoping vtec, but I have to say loss :P

if you still want a lightweight flywheel, ive got a brand new never used one let me know

Quote:

---

Originally Posted by H22

Sweet!

Hah! I was hoping vtec, but I have to say loss :P

---

As unpredictable as it seems, i did lose :( haha next time il get him!

Quote:

---

Originally Posted by Timsfifthgen

if you still want a lightweight flywheel, ive got a brand new never used one let me know

---

Il Pm you but i wont be buying one anytime soon, thanks alot though buddy

New speakers installed !

6" splits in the front, 6.5" in the rear and a single 6x9 in the centre between the two back seats. All Soundstream. Will post pics up soon :)

Also a pair of 4-way 6.5" Xplods under the drivers seat and passenger seat for that surround sound :cool:

Two amps needed to run all these, 7 speakers + a pair of tweeters all up :thumbsup:

what is the purpose of the 6x9?

Easy bass without having a sub