wrong , its 15% displacement :)Quote:
Originally Posted by Lukezen27
So , a 1.6 CAN put a 1.8 in their engine bay with no altercation to brakes etc.
Printable View
wrong , its 15% displacement :)Quote:
Originally Posted by Lukezen27
So , a 1.6 CAN put a 1.8 in their engine bay with no altercation to brakes etc.
Nope its both nowQuote:
Originally Posted by bennjamin
I just got all that info before when i was about to get a B18C7 swap
Not 100% sure but quite sure
so a D16 non vtec - b16 dohc vtec greater than 15% ?
also, for anyone who's gone from D series to B, do you guys notice much of a difference?
Please try and find the exact info ~ the rules , as of the last time i got my car blue slipped ( about 4 months ago) were that -Quote:
Originally Posted by Lukezen27
The engine would be within +15% displacement.
It would come from similar or based chassis (IE DC engine into a EG etc)
These are the basic set , to legally install a new engine into your ride without major engineering.
Sorry Ben I can't find it, only the displacementQuote:
Originally Posted by bennjamin
http://www.rta.nsw.gov.au/registrati.../vsi/vsi06.pdf
I'll see if I can find it in my e-mail at home
how about i6? has anyone ever done an i6 on an eg?
lets say a 2jzge or a rb30de? but i dont think it would be as awesome as the civette from ht.. drift it!
it;s 15% cap increase luke im pretty sure.
They've put V8s in EGs in the front and in the back so anything goes...Quote:
Originally Posted by mocchi
Hey DannyQuote:
Originally Posted by [[d a n n y]]
Yeah you guys might be right.
May have been the insurance company I was thinking of going with that asked for both.. I can't find the info I was thinking of..
anyone tried too see if their premium/excess goes up (under 25) if you engine swap under same/different displacement?
Just wondering If anyone can help me as I have put a b16 into my eg4, but now the wipers do not return to the home postion when I turn them off, my intermediant wipers do not work neither does the horn, the interior light only works from the pasenger door so does the warning beeper for the lights.
I changed the complete wiring loom from the left head light, to computor, the dash loom both of them and the loom that goes from the right head light back to the under dash.
I might be missing a relay or two as new your right foot under the dash I have three pugs not used one is a three pin plug, one is a two pin plug and one is a ten pin plug.
Thanks in advance
Ant.
Yeah, it does Steve when I checked with NRMA, it increased it.Quote:
Originally Posted by steve88