Im using the whitline reinforcement kit with an ITR rear sway. You can buy the reinforcement kit on its own with D brackets to suit 18mm to 23mm sway barsQuote:
Originally Posted by bennjamin
Printable View
Im using the whitline reinforcement kit with an ITR rear sway. You can buy the reinforcement kit on its own with D brackets to suit 18mm to 23mm sway barsQuote:
Originally Posted by bennjamin
Last time i tried , there was no way a ITR swaybar was fitting on a whiteline reinforcement kit. The whiteline bar and ITR bar "kink" in different areas , usually making them incompatible...but you have got it fitted :) Pix ?Quote:
Originally Posted by weezer
hang on, you're talking about an EK? mines an EG
EG dude :)
I have whiteline reinforcement , and as described above , i couldnt get the ITR rear bar to fit. So i used the whiteline one.
Other options for the rear sway instead of the ASR kit is the Comptech kit. Both are equally as good and they will help reduce the amount of tearing on the EK/EM's (except Type R) weak lower subframe. Notice how I said REDUCE, not eliminate.
Your spring rates will also determine whether or not your subframe will tear. Too soft of a spring rate and you'll risk shearing the metal off as pictured in the original post.
Got my car back, fixed and fitted with ASR brace, additional Omni LCAs for bling factor:p
wats with ur muffler in picture one? ur exhaust seems like 2" or so, which is normal, but the exit hole of the muffler looks like its no thicker than a 1" peashooter exhaust, looks like a big restriction?
Is this one of those take out pieces so u can make it loud or quiet?
or is it just a poorly/stupidly designed muffler?
or does it somhow help the harmonics of the airflow to help power on the NA engine??
Anyone know?
Anyways looks very nice, no subframe cracking for you.
^^ is that the right way up? how come whiteline writing is upside down.
yeah it is the right way up.. really dunno y everytime the sticker is upside down.. my sticker came upside down also but i peel it out n stick it back the right way up :thumbsup:
http://img.photobucket.com/albums/v4...0171Medium.jpg
yeah mines upside down too, it confused me for a while when i was installing it. There instructions are pathetic.
lol...mine 1 is even worst..found out tat 2 metal tubes were missed out from the package..
It's buddyclub cat back exhaust with silencer attached on the muffler (peehole)
:thumbsup:
i can't stand the noise, i initially wanted fujitsubo power getter, but my friend bought me this one for cheeeeeep.