please get rid of the yellow
Printable View
please get rid of the yellow
thats racistQuote:
Originally Posted by grifty
lol dw it's removedQuote:
Originally Posted by cbauto
Anyways seats weren't so great so I've upgraded but need to do some customisation to get them fit properly and securely and give them a clean
http://tapatalk.imageshack.com/v2/14...d6d34d7c91.jpghttp://tapatalk.imageshack.com/v2/14...1df933e6d2.jpg
Will update when there installed :)
Actually goin to get rid of the last set of seats and am going to use these instead as I picked them up yesterday for cheap
http://tapatalk.imageshack.com/v2/14...1a108a1aa2.jpg
you should start a build thread.Quote:
Originally Posted by latinstyle69
ballin
Hmmmm I just might, it's a very slow process ATM
This page is quiet but I'll keep posting haha
Got some ek4 rear seats to replace the gay old ones, and some slotted rotors to tuck under my enkie j speed rims
I won't be using the headlight protectors if anyone wants to offer for them
Been adding little bits and pieces to tidy up my bay:
https://farm9.staticflickr.com/8678/...ba509ee0_z.jpg
Such a nice bay.
it is..just the hektik ebay intake spoils it
Yep. Work in progress.Quote:
Originally Posted by EKVTIR-T
Bay looks clean man!!
In another note, anyone have any coilovers or springs for sale? Or know a good place to get them? Needs some droppage
http://tapatalk.imageshack.com/v2/14...680cccf7cc.jpg
Pulled interior out (everything but the dash) and cleaned it. Whilst there I re wired the stereo and front and rear speakers (shout out to those who helped me on FB when problems arose). Was my first time installing but nothing blew up when I turned it on so should be good, lol. Got a few things here and there left to do before a blue slip next week. Hopefully nothing else pops up. Every time I fix one thing I find another, lol.
Preparing for an engine removal
http://tapatalk.imageshack.com/v2/14...9c18163453.jpg
What are you dropping in?
Im gonna drop a B16A into it. Its gonna be hardwork but Im definitely up for it.Quote:
Originally Posted by White Noise
Ordered some Hawk Blue pads..
Installed the recaros and ek4 rear seats, just missing rear seat head rests http://tapatalk.imageshack.com/v2/15...956d4c85fe.jpghttp://tapatalk.imageshack.com/v2/15...8cef1fc0d3.jpg
Faaaark
Those seats look madQuote:
Originally Posted by latinstyle69
Any mods required to fit the rear seats?
Thanks man
Yeah the brackets at the front don't fit so u can either swap the upholstery from the ek4 seats with the stock ones or drill out new holes for the brackets and cut out some foam for where you fill up fuel lines goQuote:
Originally Posted by grifty
Quote:
Originally Posted by latinstyle69
Loving those Recaro's!
Thanks manQuote:
Originally Posted by ~Sp33~
Picked up my new bar which has been painted. Installed:
http://tapatalk.imageshack.com/v2/15...391ceda4dc.jpg
Prefer this style to my old one
fuark so nice
pics of whole car
Yesss! Pre-facelift bar
Don't have many atm but Heres a rear shotQuote:
Originally Posted by mocchi
http://tapatalk.imageshack.com/v2/15...9cc8cbaba2.jpg
And yea preface lift looks heaps better, just need a front lip now
Did some skids
http://i109.photobucket.com/albums/n...psl03abore.gif
Are ee's allowed in here? Got some p1's and sprayed them bronze to offset the silver
http://i12.photobucket.com/albums/a2...ps0329bbe0.jpg
Looks good man!
Mm mmmm
Nice, I also got some ls recaros from a proton gti, mine aren't as clean as yours so im re trimming them one at a time, this is my spare drivers seat while I do thatQuote:
Originally Posted by latinstyle69
http://i12.photobucket.com/albums/a2...ps4354fd6c.jpg
Great seats for a daily.
Your hatch looks great btw, great seeing ed's getting appreciated
This is my new account lolQuote:
Originally Posted by dove grey 64
Thanks man but nah mine need a retrim as well but I'll do that later on, there's a couple of cig burns on both, didn't know they came out of a proton, got these from a wreckers covered in a few years worth of dust lol.
Did u buy new mounts or customise the existing ones?
Just used the stock rails, 88 wagon seats mount from the bottom and are equal height so it's a 15min redrill and bolt up to match with bottom mount recaro seats.
Yeah these particular ones are factory proton satria gti seats, you can tell by the material choice. The centers are good and well done but the material they used on the side bolsters is cheap, I'd recommend re trimming the sides even if they seem ok.
Oh nice man didn't know the wagon rails fitted easier, I ended up making a bracket to fit the existing rails lol looks stock though
Yeah I plan too, I need to get a side plastic cover too as I'm missing one
anyone got a ed6/ef9 for sale by any chance thanks
There's this in brisbaneQuote:
Originally Posted by pengypengy
http://tapatalk.imageshack.com/v2/15...e4778a2f07.jpg
how much izzit?
that must fly with h2b
h series gammin
h2b k series killerQuote:
Originally Posted by u mad?
my met has one,Quote:
Originally Posted by carayan
and nah lol
Was on the hwy from syd to act today, and this little Asian bloke in this black and red crx flew past, then slowed down to my speed (the limit + 5km)
He then decided to put clutch in and redline constantly and kept motioning me to roll my window down
So as I did, he kept screaming "hay dua! Dua toi!!" (race me/let's race in viet)
So as I shifted down from 5th to 3rd, I heard what might of been him shifting to first car and saw him roll back so damn quick and smoke coming out from his bonnet.
I just drove off lol
uwotmet
http://images.tapatalk-cdn.com/15/04...bb8c3cc1ee.jpg
Hasport rear trailing arm bushes installed at work last night, now I can install the rear disc brakes :)
I'm not ready to post pics of my car just yet but I want to give a run down on what I have so far.
KW v3 coilovers
Function 7 lcas
Hardrace camber kits front and back (shouldn't have wasted money buying this didn't even need it)
Tannabe front sway bar It either a 24.5 mm or a 25mm
Ultra racing front strut brace
cusco rear strut brace
Personalise plates (crx42)
15" enkei wheels with cheap sailun tyres (pretty much brand new tyres but crappy)
Just post a pic man lol
Just cleaned up the 96 itr Calipers I picked up, sand blasted at work ready to be painted, then installed
http://images.tapatalk-cdn.com/15/04...cd891c0186.jpg
I want to upgrade my brake booster and master cylinder, any recommendations?
What discs are you going to be using?
These fit 262mm
I'd assume that an EG/ITR BB and BMC would fit an ED given that it fits an AH with a lil work.
Sweet thanks manQuote:
Originally Posted by SHOGUNOVDDRK
Keep in mind.Quote:
Originally Posted by wheytastic
When I put the EG BB BMC in my AH it did need work for perfect feels but it worked well.
Ok cool, I do recall reading somewhere the 90-92 integra is like a straight fit but I'm not 100% sure on that and can't find the post lol
All Honda's are interchangeable pretty much, same bolt pattern so yes the 90-920 will fit.
if you want a 1 inch master cylinder & booster it's a very tight fit and requires you to shave the booster a tad...
Is a mini brake disc swap just for the front or is it front / rear?
This was posted up on CRX Aus from here.Quote:
Originally Posted by Renaissance_x
Originally posted by grifty
Hey guys,
I stumbled upon some build threads on various froums stating there is a cheaper way to upgrade to 280mm brakes. I have put together a parts list for the conversion below.
This conversion requires no rotor spacers or caliper bracket machining. It also does not require re-drilling brake rotors to 4x100!!!
This only works if you are currently running stock 262mm knuckles. If you have 242mm ones you will need to upgrade to 262mm ones first. This will work on any ED/EF/EG/EK/DC.
1. 262mm kunckles.
2. Bendix DB1206 pads or any of your choice as long as they are the same design.
3. 17CL15VN calipers and matching brackets.
4. DBA2526 or RDA7996 rotors, these numbers are for blank rotors.
5. 1 inch master cylinder with matching booster.
The rotors are from a 2007+ Mini Cooper non-S. They are 280mm in diameter, 4x100 and have the same centre bore! The lug nut holes are a little bigger but this wont effect anything. These fit perfect without issues, no modification required all bolt on!!!
The required calipers can be found on Accord V6's, Type R's, Odessy's, Legned's & Prelude's. Don't be fooled by paying top dollar for ones that came from a Type R, they're all exactly the same. You can pick them up for $50 the pair.
I paid $132 for the RDA rotors from my local parts store. you would normally pay $190-210 for the RDA 282mm blank rotors redrilled to 4x100 + $40-50 for the spacer or caliper machining. That's a saving of over $100!
I am currently doing this conversion and will post some pictures once completed. I have purchased the rotors and confirmed that they do fit without any issues.
Rear brakes installed!
http://images.tapatalk-cdn.com/15/05...ae7aafb85e.jpg
I stripped the interior chassis loom of all the speaker, power window power mirror central locking wires. all thats left are the brake lights, fuel pump and ABS wires.
Going to be a track only is it?Quote:
Originally Posted by Howardm
Hey hondapop,
Yes track day car only have stripped all interior out and slowly working my way through, would like to be in a position to World Time Attack it one day but time will tell. Need to sell off more interior parts to fund the small stuff needed to get to a track day.
Any pics man? And what engine do you plan on Running?Quote:
Originally Posted by Howardm
Attachment 28212Attachment 28209Attachment 28210Hi Wheytastic,
Currently have the STD B16a but this will change over time, B18 then K Swap on the plans, have to tread carefully as the wife will S##t a chicken if she finds out the cost of a Kswap, I was planning to cage the car before i do a track day but am to keen to have a go so am expressing the build and will run with out a cage first up. I am an old bloke and havn't driven on the track since the late 70's, son has been havin all the fun (at my expense mind you). But this is long term so no hurry.
Oh snap really nice Em1 man, first car I bought was an em1, awesome car for a project.
Too bad your in the wrong thread haha 88-91 civic and crxs in this one
Either way hope it goes well especially your first track day
Thanks mate,
I am wanting to do a build thread but still can't get on it have to serve the rookie period i guess, but its a 1999 model so this thread will do for a while. Going to do the track day with Circuit Club
You can't creat a build thread in that section, you have to create it here and then if it lasts long enough the mods will move it there....Quote:
Originally Posted by Howardm
Just call it Howardm's EM1 build and go from there...
Bought a set of Skunk2 shortened sports shocks for the Gen2 CRX.
My ed has a new ef friendAttachment 28509
Got some mugen mr5 to pull apart and repolish... no lug caps though sighhhh
http://images.tapatalk-cdn.com/15/07...0076797be6.jpg
Those are the 14" ones off that b18c2 crx you got yeah?
Yeaaaaah
I'm looking into getting a '91 ED GL for my first car. Any ideas on what I should first do to it if I get it? Keep in mind I'm on my Vic P's.
I don't think anyone has burned their car and filmed it. You could do that. Quite uniqueQuote:
Originally Posted by michael.908
Rear interior was faded and had and uncared for when I got it, wasn't even installed was all over the boot... so I finally cleaned it up and gave it a coat of vinyl gloss black
http://images.tapatalk-cdn.com/15/08...051395517c.jpghttp://images.tapatalk-cdn.com/15/08...23ebcdeabd.jpg
It's mod plated for 2 seats, just need to clean the rest up
Just lowered my ED6 on Koni shocks and generic springs and sleeves http://images.tapatalk-cdn.com/15/08...6506b5f0dd.jpghttp://images.tapatalk-cdn.com/15/08...4e7101ba94.jpg
Man that thing looks clean... Is it? Or the pictures deceiving?Quote:
Originally Posted by michael.908
Yeah man it's so clean. I was really surprised when I first saw it.Quote:
Originally Posted by markismaximus
Looks great in silver!
Needs some touch ups here and there but otherwise the paint is perfectQuote:
Originally Posted by ~Sp33~
Ohhhhhhhh my. I have a soft spot for these.. I ryk eht vewy much.Quote:
Originally Posted by michael.908
Me and two of my mates just bought a 88 crx as a project track car (on a budget of corse)
http://images.tapatalk-cdn.com/15/09...57476d0799.jpg
Any one got any good tips on how to fix it up and what we might need to do to get it track ready?