All three... I used half a tube for all threeQuote:
Originally Posted by Lukezen27
Printable View
All three... I used half a tube for all threeQuote:
Originally Posted by Lukezen27
Sweet man :thumbsup:Quote:
Originally Posted by Lerlo
Hope that holds my boost and I stop bunny hopping :p
Good luck!
I havent put mine in yet...hope it holds up.
Oh btw, the rear mount is really really tough to remove....
Yeah the back one sucks assQuote:
Originally Posted by Lerlo
I'm doing the front two and get'n Ben to help with the back :thumbsup:
Could ya let me know whats the best way of getting to it. I unbolted the T bracket and i couldnt get it out then somehow I got to all three bolts of the mount with a long extension and a swivel socket. Then somehow after much struggle I removed the mount. But putting it back in is gonna be another hellova struggle. lolQuote:
Originally Posted by Lukezen27
guys i just finished hasport 3 x mount kit on a DC2 vtir - pain in the ass. Very doable , just a bunch of levering forward and back and you will get there eventually.
the problem is the Ozhonda no can do attitude or the just pay someone to do it cause i can't be bothered attitude.Quote:
Originally Posted by bennjamin
I managed to get the mount in eventually....took alot of levering as well...lol..but ITS IN!!
Man sikaflex 252 is a pain in the ass to work with :p
Both front lowers and rear engine mounts are drying inside overnight.
Mounts cleaned with kerosene then cleaned with IPA electronics solvent to remove any oil residue left to ensure the sikaflex sticks well.
Once dry I'll dremal any excess sikaflex off and neaten up the mounts..
filled up the mounts in one go luke? gonna take more than overnight to completely cure hehe
Yeah I did :oQuote:
Originally Posted by vinnY
Might have to bust out my brothers hair dryer while he's away this weekend :p
Or put em in the oven
yeah the oven might work, give it a go and let us know how you go ;)