I just checked it again. Everything is fine, it might be just the angle of the photo.
Printable View
I just checked it again. Everything is fine, it might be just the angle of the photo.
WOW Dan autosalon redy :)
good to hear!!Quote:
Originally Posted by Atjo
Not yet, still few things need to be done, help me Felix hehe
THort u finished haha theres more surprise :DQuote:
Originally Posted by Atjo
Installed the JDM window visor last night. Thanks to evolution for the pictures how to put on the clips.
http://img691.imageshack.us/img691/1210/img0998vl.jpg
http://img534.imageshack.us/img534/8751/img0997c.jpg
where have u been? raise to highest then going offroad? dirt on side mirror.......
It's been raining here in melbourne for the past 2 weeks and lot's of construction near my house.
whens the raizin going in?
It's already in but not all grounding cables are in.
arr much difference?
Don't really know as i haven't driven the car much.
bro, where do you guys source the clip visors?
YAJ, Andy found it for me last time.
^^ did i? why i'm still using the AUDM one but found a JDM set for u........
Because you already had one? I think it was you who found it for me. Can't remember now hehe
Atjo, the more I think about it, I think u should get a roof spoiler.
I will if i can find a nice one or cheap one for modulo spoiler.
Very nice man,
Seen it on Air Force's Facebook page as there demo car.
But I think u need more low down on the rear.
Back not low enough Dan.
I will adjust the rear camber later on to make it the same as the front. Do you have the link for their facebook page? I didn't know about it.
hey, i'm Mr Economic not youQuote:
Originally Posted by Atjo
Well i become you now after my spending in the pas few weeks hehe
btw, are you into competition on MAS?
where is the most updated pix Dan
cbf go thru all the pagesssssssssss
How much is that? will it affect the paint? How good it handle under the sun?Quote:
Originally Posted by Atjo
Andy: i'll be entering MAS, Gas: i paid $310 and should be ok under the sun as they have been doing this for a long time. I'll post my final pics as soon as everything installed.
Received my HKS Premium Legamax few days ago. Will get it installed first thing in the morning.
http://img217.imageshack.us/img217/645/img1007l.jpg
http://img339.imageshack.us/img339/3104/img1008a.jpg
http://img204.imageshack.us/img204/9905/img1009u.jpg
http://img148.imageshack.us/img148/5458/img1010w.jpg
http://img838.imageshack.us/img838/5397/img1011ru.jpg
^^^ It's so shinny
I should have gone with a new proper set like yours Dan. Look at the resinator, so small and nice not like the big hunk of metal on mine
hmm.... all you family men set a new level of modding RB1 now..... very nice.
Evo, don't think that way la even its a fact.... never know until you try.... well its my bad surfing YAJ and UpGarage too much....
That's deep for just the roof......
Was thinking to do it but then i rather paint it...
Gas, you probably pay half of that cause my roof much bigger than yours. Last time I paid $400 to paint my euro's roof and now I have to pay $700 for my odyssey's roof. So I rather put vinyl for my odyssey plus I don't have to pay anything else if I want the roof back to white.
Dan, don't want to hear about the roof! Update about the exhaust!
Just came back from exhaust shop. The exhaust was installed within 45 minutes. Everything straight forward except the right muffler need to bend a little bit cause hitting the rear bumper. Same problem like my Tanabe exhaust for my euro last time. The sound from inside the car is so damn quite when cruising. If i rev the car, the sound of the intake louder than the exhaust maybe because the exhaust a bit far behind. I think you can hear it better from 2nd or 3rd row. The mufflers don't stick out much because of the bigger rear spoiler compared to Damien's one. Overall i like the sound but not the same as my euro's tanabe which IMO has better and deeper sound than this. Maybe HKS turbo or supercharge next? :p Will take the video later on.
BEFORE
http://img534.imageshack.us/img534/2315/img1012t.jpg
AFTER
http://img843.imageshack.us/img843/5049/img1013wq.jpg
http://img827.imageshack.us/img827/2678/img1014.jpg
http://img202.imageshack.us/img202/2079/img1015f.jpg
http://img838.imageshack.us/img838/2397/img1016d.jpg
Dammmmmm all works well Dan
looks good. Atjo. i`ve spot ur ride several time along point cook rd. not sure if u spot me, i`m the guy in the grey mazda.
very shiny.... not the car though..
guys is it necessary to have the piping thermal painted/wrapped??
thermal paint on a full stainless steel catback? definitely a no no..... normally people only thermal wrapping the header but not catback system
Which grey Mazda?Quote:
Originally Posted by fchiew0304
So shiny!!
I'm somewhat surprised by the quietness of the HKS exhaust. The fujitsubo I had was quite audible, especially accelerating in the 2500~3500rpm mark. The fujitsubo I had was for the 160hp model not the Absolute. I would think Absolute one will be louder again.
it`s a grey mazda 6. will giv u a "wink" next time if i spot u again in the future.Quote:
Originally Posted by Atjo
Little update from yesterday. Installed the Greddy front strut bar.
http://img90.imageshack.us/img90/9341/img1021s.jpg
Sounds of the exhaust.
http://www.youtube.com/watch?v=sHjJXBZXWGc
Steve, i can hear the sound from the outside but from the side not too loud, maybe my intake sound taken over the exhaust sound.
Dan, can you post a vid of yr Apexi intake sounds? just want to compare to my K&N and see if i need to change....
Dan, when is the fish tank and bird avary going in?
You and Ray have gone crazy with your car in sucha short time, would like to see the pics at the autosalon!
shame i cant go:(
:thumbsup::thumbsup::thumbsup::thumbsup:oOMG!! the car look so sexy man. LOVE TAT!!!!!!!
I'll do that after i got my car back.Quote:
Originally Posted by AusAccord
I'll let you do that for me :)Quote:
Originally Posted by SiReal
Why not? It's only 1 hour away :p Well that's because all the mods that i should've done it from last year just be done in the past 2 months for the MAS heheQuote:
Originally Posted by niiCk
Thank u :)Quote:
Originally Posted by Nonobui
Old puddle lights were taken out on saturday and new puddle lights were installed last night.
http://img85.imageshack.us/img85/2221/img1029g.jpg
whats 1 hr away? lol Melbourne is pretty far from Sydney. If it was just an hour away, i'd come along hahaQuote:
Originally Posted by Atjo
yeah youre car is looking heaps good..
ive always wanted to do this, but i dont know if its legal? well in sydney that is..Quote:
Originally Posted by Atjo
1 hour away by plane heheQuote:
Originally Posted by niiCk
There's a switch so i don't think that's gonna be a problem.Quote:
Originally Posted by niiCk
cheers Dan!! my K&N is getting louder and louder when i floored then my wife is getting more nervous all the time....
Maybe we should swap? hehe
nice car man, spotted at dt panels i think on saturday
someone's going bonkus again! haha
Hey Yung, when your wheels coming?
Don't know man...last i heard is end of September early October :( :(Quote:
Originally Posted by Atjo
saw your car last night. LOVE THE HKS bro! u r tempting me! HAHA
What time last night?
haha,...was in the "workshop" that time..lol...Quote:
Originally Posted by Atjo
I went there around 11pm.
Wow Dan your workshop will open till 11 for you?Quote:
Originally Posted by Atjo
"workshop" lol
Yeah cause it's owned by Mugen_Retro :p
Hey Nick, come to melbourne this weekend for your stickers hehe
I see lolQuote:
Originally Posted by Atjo
Hey Dan, i really want to drive down but i cant:(Quote:
Originally Posted by Atjo
todl Ray i couldnt already:(
would love to see both your cars!
sounds like i found a mate if decide drives down to Melb meeting you DanQuote:
Originally Posted by niiCk
yeah i wouldnt mind one time..lets=DQuote:
Originally Posted by AusAccord
Few updates before the car was entered to MAS on the weekend. Bg thanks to ABANG for supplying & installing the boot setup and Mugen_Retro for the "workshop" :) Will post pictures during MAS later.
Boot Setup
http://img842.imageshack.us/img842/5628/img1062f.jpg
Pivot Raizin
http://img825.imageshack.us/img825/9373/img1053t.jpg
Mugen Oil Cap
http://img409.imageshack.us/img409/9650/img1054o.jpg
Mugen Radiator Cap
http://img409.imageshack.us/img409/503/img1055.jpg
Raizin LOOKS MINT :p
moar moar moar pics on chicks from MAS
bro Dan, I got a noob question for you.
WHen you slam your car to the ground, what is it sitting on? Can't be the body kit or undercarriage yea?
Is there some kinda block its sitting on or its actually just hovering close to the ground?
The bodykit almost touch the ground. Currently it's sitting on the rims. I think it will sit on the bodykit if I'm using stock rims.
Hey Dan "or anyone who knows"
Can i ask where you got the JDM side wind visors? Looking to get some but cant find any :(
From Yahoo Auction Japan.
Thanks for the photos.Quote:
Originally Posted by INVSBL
keren :) hehe so hot man :)
Atjo,
PHat ride, look really nice now
How is the Apexi SRI ? must be really loud eh?
I just put a BMC CDA in, it's LOUD, but finally can hear the usual HONDA Vtec engine scream! LOL
^^ pics of BMC CDA.... looks like every pod filter put onto RB1 will sounds sexy (may than saying loud)
The SRI is quite loud and even louder than the exhaust. I might make an enclosure for it since the intake is out from the car now.
Just came back from Indo yesterday. I decided to sell my rims after went to a wheels shop over there. I took some pictures of wheels that they're selling.
http://img522.imageshack.us/img522/4203/img15390.jpg
[img]http://img708.imageshack.us/img708/7476/img1540su.jpg[/img
]
[img]http://img641.imageshack.us/img641/6749/img1541g0.jpg[/img
]
http://img220.imageshack.us/img220/1092/img15420.jpg
http://img100.imageshack.us/img100/8490/img1543u.jpg
http://img219.imageshack.us/img219/2071/img1545k.jpg
http://img59.imageshack.us/img59/2600/img15460.jpg