Lower (King Spring)
Mugen Visor
Chrome handle
K&N Filter
Photo Coming Soon!
I want to install mugen body kit, but I afraid it will become too low as my car was lowed. Any one do them both?
Really hard to drive??????
Printable View
Lower (King Spring)
Mugen Visor
Chrome handle
K&N Filter
Photo Coming Soon!
I want to install mugen body kit, but I afraid it will become too low as my car was lowed. Any one do them both?
Really hard to drive??????
Of course people have done it. It can't be that hard to drive - i've driven a car with 8cm ground clearance before - learned to drive with it. All you need to do is make sure you don't go straight up bumps.
ive got 13cm clearance and yeh its fine.. just dont go over steep driveways, or ur lip kit will get destroyed, it hurts =.=
my lip is already destroyed
http://img692.imageshack.us/img692/8221/dsc0331copy.jpg
you have to snake over bumps
the VSA switch panel costs $9.95 from honda. should i buy it and put garage door opener there..?
you dont have to snake over bumps... if you go fast enough you can get air ;)
HAHAHHAHAHAA. my beaks bar scrapes over bumps even if i snake sometimes lol. poor thing
hence why beaks is only a BLING item. cos you will loose it on the road one day.
guys check out the events forum for fd civic cruise this month 21st http://www.ozhonda.com/forum/showthread.php?t=123613
Got...
Kaixen 6000k HID's installed, courtesy of ganj3
White LED's in parkers and number plate lights
3300k MTEC high beams coming in the mail soon, courtesy of Liquidsound
:D
pics?
I'll do pixors when i get the the HB's and then can be bothered going out at night to do it
http://farm5.static.flickr.com/4037/...86b67705be.jpg
18x10+33 F, 18x8.5 +27 R
insane fitment
if only we had fd2r front fenders, could get much wider wheels at the front :(
r those equips?
heres a small funny mod.. for the lulz
http://i358.photobucket.com/albums/o...0011017a_1.jpg
sticker from the boys up in Cali San Francisco
LOL is your wheels set up hella flush?
hell noo.. tats wats funny
may do some wicked camber setup later down the track ;)
lol i got one of those stickers too :)
Just waiting for the new setup to be fitted for stanceworks one to go on.
i just got back from Japan, Singapore, Indonesia and Gold Coast
and i got some stuff back for my fd!will take a photo 2moro perhaps?
plus i got 3 Mugen Pedal replica from Thailand for Manual. anyone?
ekdez, if anyone's going to go hellaflush, it's you.
MTEC golden style globes arrived today. The bulbs aren't as yellow as hoped for, so they might not make my reflector look yellowduring the day :(
Are mugen pedals stick on or do they need to be drilled?Quote:
Originally Posted by ej20i
hella flush!! lol you hear 'hella' every 5 seconds in the bay area.
is my step up hellaflush?? lol
get some 5mm spacers and it will be lol.
haha.
saw you drive past the other day. looking good.. are keeping those rims on when you get air sus??
POO mtec golden styles aren't yellow coated :(
stick on with clips like thing in the back but u can drill em if u like too as wellQuote:
Originally Posted by FDBenni
Timm post pics up now!!!
stuff from NIPPON!
http://i193.photobucket.com/albums/z...i/DSC_0342.jpg
http://i193.photobucket.com/albums/z...i/DSC_0343.jpg
http://i193.photobucket.com/albums/z...i/DSC_0344.jpg
http://i193.photobucket.com/albums/z...i/DSC_0348.jpg
http://i193.photobucket.com/albums/z...i/DSC_0351.jpg
http://i193.photobucket.com/albums/z...i/DSC_0353.jpg
LOL
Imported FD1? JDM YO!
http://i193.photobucket.com/albums/z...i/DSC_0355.jpg
Yes i got two manifold for R18A, Anyone?and i got two left of the pedals?
anyone?
or i'll be installing the manifold and the pedals to my car
hehehehehe
http://i193.photobucket.com/albums/z...i/DSC_0358.jpg
i so need to hit up japon sometime later
nice buys tim
went to take very quick shots, every pic failed... so i have one here for you
http://img25.imageshack.us/img25/4286/dsc0352pz.jpg
nice one mate! i want rims like that.. would u mind telling me what they are? sorry im just new here.. got my fd just yesterday.. :)
broadway mirror! does it look good or have tacky clips on the outside?
Let us know how your manifold goes too :)
My HID install: Kaixen 6000k. Somehow they never look that bluey in pix from my phone... LOL
hard to tell, but the signs really really glow
http://i128.photobucket.com/albums/p...0220101203.jpg
My cutoff against a garage door. A bit glary up the top - see the bits i circled... I guess they'll go to illuminate signs
http://i128.photobucket.com/albums/p...0220101206.jpg
what the headlights look like... Yes, my parkers do look bluer than than the HID's, but somehow the HID's don't look very white at all here..
http://i128.photobucket.com/albums/p...0220101207.jpg
works t1sQuote:
Originally Posted by jjeetthh
nice stig, i wana see it sitting on the ground :)
nice pics stig and curtis.
how does the air sus handle stig???
were those headers?
p.s. i prefer the daylight one of your car stig, night shots never do a car justice, without the proper lighting..
nice curtis, yes they are headers x2
nice stig...btw what is the width of the T1's??
looks hot stig. how high are u off the ground at the front? doesnt look too low to cause u too much truoble =D.
headers................ wat brand is that???? mind telling how much????????? thank u
can only do that with stockies lol rims are too wide so they sit on the fendersQuote:
Originally Posted by FDBenni
handles alright, bit boaty thoughQuote:
Originally Posted by threesix
yeah night shots are pretty bad lol, ill get someone to do day shots when i get some timeQuote:
Originally Posted by ekdez
8+38 front and 9+38 rear, im not happy with the front fitment though, its not flush enough for my likingQuote:
Originally Posted by fitme
not sure, around 6cm from the ground? the front touches the ground on stockiesQuote:
Originally Posted by black8thgen
balling outta control.
someone should do this to their civic
rays ce28n 19x8.5+29 all round, i would love to do it myself but money is an issue lol
Put spacer on your front rims & camber kit for front & rear :)
how did the manifold extractors work out for you?
Stig would that fitment require rolled guards?
Quote:
Originally Posted by Stig
modfree 2010 ;)Quote:
Originally Posted by Atjo
err.. yes.Quote:
Originally Posted by black8thgen
:confused: quite logical aint it?
LOL @ Stig MOD FREE 2010?
NOT REALLY!!!!!
been 42 days and counting, got another 323 days to go LOL
LOL!
headers perhaps stig?
LOL!
na its okay haha
Just checking......
ive put 18x8.5 +28 and 18x9.5 +33 on my car in ce28's but they had 265 or something on the rear..Quote:
Originally Posted by Stig
ill throw my spare 225's on the rims and see the fitment =]
but i gotta get my hands on those air sus asap tho LOL
got some new RAYS nuts
who wants my buddyclub racing pro spec nuts? PM if interested
normally header is like 4-2-1 or 4-1 design..... is the fd1 the same????
the exhaust manifold?? tats lik built into the engine block.. the exhaust goes straight into the catalytic converter
any pic????? thank u
so had to dig this up when my engine bay was stock clean
http://i358.photobucket.com/albums/o...1/R0010634.jpg
see that silver metal housing at the bottom.. thats the 2-bed catalytic converter located immediately after the mainfold
Yup, thanks John, so the manifold basically just bolt on to where that silver thingy is
hhahaha his keeping a close eye on you stigQuote:
Originally Posted by googed
u mean the circle area is the header? beneath the circle area is the cat???
so from the aftermarket header picture, the r18 header is only one piece straight????
it is not like the conventional one where the design is 4-2-1 or 4-1???? am i right????
thank u
http://img709.imageshack.us/img709/7263/enginebay1.jpg
andy...doesn't ur HID spray??gf is bitching about how bright it is on mine...sadly have to return bck to stock...arghh!
adjust the beam lower..... it sprays a bit.... its ok after the car is lowered and its is beaming lower after lowered.....Quote:
Originally Posted by zimmy83
yeah...i guess...its been lowered but the mrs hates it..oh welll...looks like its bck to the halogens!hahaha...
strange, mine's not that bad. Remember my garage pic a page back? It's not that bad.
still, consider urself lucky u didn't get pulled over
Haha...nah drove behind coppers n side by side... No issues!:)
anyone know which USDM badge size is the same as our FDs?
FG i think is the same
FA
What badge? the rear H?
Nah front one
K20Z4 Powered FD1
http://farm5.static.flickr.com/4002/...f3957d28_o.jpg
nice....
Haha, i was waiting for a friend with an FN2 to crash
Cruelty!
ganj3 in particular :)
respectQuote:
Originally Posted by Bowzer
nice! car looks very clean too