what type of material do u guys reckon that is ?? ive got the same problem with my m and m honda front strut >_< the pipe is just rubbing the top of the engine and the bottom of my strutQuote:
Originally Posted by typercivic
Printable View
what type of material do u guys reckon that is ?? ive got the same problem with my m and m honda front strut >_< the pipe is just rubbing the top of the engine and the bottom of my strutQuote:
Originally Posted by typercivic
i put the exhaust on last night
does it happen all the time or only during wet/rainy conditions?Quote:
Originally Posted by icecrm
because dc5/ep3 with aftermarket exhausts have a similar problem during heavy rain
all the time when there is load on the engine
like down shifting
I know about it too well .Quote:
Originally Posted by icecrm
http://www.ozhonda.com/forum/showthread.php?t=80848
Stiffer mounts and exhaust mount hangers seem to have helped a bit.
But I do get it on odd occasions of heavy rain.
i have been getting a rattle as well since putting on the rm-01a but didn't think it would be this as it sounds like it is coming from the front right somewhere but will try rubber mounts to see if it solves it.
Had the car on the dyno yesterday to see how it was going after putting on a gruppe m and the rm-01a, got a free vafc 2 so put that in and got it to adjust a/f ratios to make car is running safely till i get KPro. I was happy with the result considering it was run on a dyno known to read average as opposed to inflated figures, managed to squeeze 12 more hp at top end and the car rockets through vtec now. Will put graph up when get the chance.
what was the figure?
woops forgot to say actual figure....183 bhp atw, that's around 135kw i think.
wow nice typercivic :D nice figures :D
that is a nice figure
gratz
Nice! What brand of dyno did you use?Quote:
Originally Posted by typercivic
Could be nitrile rubber. You can get it from Clark Rubber. Not sure how much they would charge you for such a small piece through.Quote:
Originally Posted by SuperSteve