Printable View
http://www.internationalmotorgroup.com.au/
av90 im not 100% sure on the part numbers from the site cause for pillar garnish theres 2 rubber seals one inside the door that holds the window and the other is around the rim of the door so it doesnt get water inside your car.
Sigh
Got an issue with the ep - thought it was a bad swaybar endlink.....replaced both sides today with brand new oem parts. Still does it....
Steering or suspension makes a clunk at different situations. Either sharp turning while stationary , felt thru the floor when hitting bumps and also the clunk is heard in the rhs suspension when turning and hitting a bump.
I believe this issue is directly related to a big pothole hit while in qld a month ago.
Everything is tight - only noticeable thing is that the spring (stock) can be slightly moved in it's perch. shouldn't be able to in my past experiences !
Any thoughts ?
I had a similar issue long time ago. End up being 1 quarter of a turn on a control arm bolt. When I can get to my car ill take a pic n show u the exact boltQuote:
Originally Posted by bennjamin
Sent from my Desire HD using Tapatalk
funny that.. my rear drivers side swaybar endlink.. one of the bolts somehow went missing, now the braket kinda just hangs there =/ makes a popping sound when there's more pressure towards the rear drivers side wheel (is. when i go up a drive way or a speed bump) it's only been like that for a day or two.. at first i thought i popped my tyre, lucky i went to get that checked cos there was a nail in my rear drivers side tyre.. but yeah, is it safe to be driving around with the rear sway like that?
Not safe
Get it fixed asap
Come over to my place I got alot of spare Honda bolts free of charge :-)
is it safe to ask where chuck norris lives? lol pm me! i just need that one bolt, i'll shout you coffee and a free hang out with meeeee lol could use some good advice from a seasoned honda veteran!
are you on stock suspension ? or coilovers?
^ who are you referring to i-vtec? i'm running stock sussy, my dp is photoshopped for droppedness lol
I broke something at the Drags last night
Can't work out what though
Crazy vibrations going down the gears but only sometimes
gosh luke. Smashed something but did u smash times ?
You might of ripped a mount or lower control arm bush....
BTW RE my problem - fixed the issue guys of the clunking.....was both RHS lower control arm bolts were loose ( considerably ) . tightened to about 100nm ( 98nm honda spec) and all good.
Quote:
Originally Posted by bennjamin
crap 14.1
Still 30c on there though
need to wait for 20c :)
forgot to quote.Quote:
Originally Posted by Rai-C
i was referring to benjammin's post in regards to his sussy problem.