Js 70RR or nah

Printable View

Show 80 post(s) from this thread on one page

15-10-2012, 09:02 PM
Jax-dc5r

Quote:

Originally Posted by WATAJK

For one, i believe the 70RR has been replaced and re-designed...
J's Racing - FX PRO Titanium Exhaust
http://www.jdmconcept.com.au/part/js...egra-dc5-01-07

If your thinking about buying the one that's on ClubITR and has a flange that's broken... I think you'd be making a mistake and i think you putting this exhaust system on a street car would be purely pointless....
It's Titanium, not stainless steel... Very different product, a very expensive product....

Buy a 60RS, save yourself the headaches.

Pretty much what I'm planning on doing! Only thing I'm not so sure on is ti or ss version
15-10-2012, 09:11 PM
WATAJK

Quote:

Originally Posted by Jax-dc5r

Pretty much what I'm planning on doing! Only thing I'm not so sure on is ti or ss version

Your going to cut the exhaust up... Why get the titanium for then?
15-10-2012, 09:19 PM
Jax-dc5r

Quote:

Originally Posted by WATAJK

Your going to cut the exhaust up... Why get the titanium for then?

If I got a 60rs use my Jdm 4-2 header and find or get a custom made 2-1 pipe with cat why would I need to cut anything?
15-10-2012, 09:23 PM
mcOZ

Quote:

Originally Posted by Jax-dc5r

Pretty much what I'm planning on doing! Only thing I'm not so sure on is ti or ss version

I dont think you can get 60RS Ti for a DC5
15-10-2012, 09:27 PM
WATAJK

Quote:

Originally Posted by Jax-dc5r

If I got a 60rs use my Jdm 4-2 header and find or get a custom made 2-1 pipe with cat why would I need to cut anything?

Sorry - read what you said wrong.
Correct, if you went with the 60RS you wouldn't need to cut anything. You would need a JDM Header with cat so everything would bolt up smoothly, oh an also the EP3 swaybar.
JDM DC5/EP3 header would be perfectly fine but any other JDM Header is good.
http://www.jdmconcept.com.au/part/js...egra-dc5-01-07
15-10-2012, 09:55 PM
Jax-dc5r

Quote:

Originally Posted by mcOZ

I dont think you can get 60RS Ti for a DC5

Ohh really?? I Realy wanted ti
15-10-2012, 10:08 PM
mcOZ

Quote:

Originally Posted by Jax-dc5r

Ohh really?? I Realy wanted ti

Yeah I think so, JDM concept and other sites dont have them, so I guess ss is the way to go!
15-10-2012, 10:15 PM
Jax-dc5r

Quote:

Originally Posted by mcOZ

Yeah I think so, JDM concept and other sites dont have them, so I guess ss is the way to go!

Hmmm, I'll ring a supplier I know hopefully it Does, I'm
Worried stainless will sound shitty
15-10-2012, 10:24 PM
mcOZ

Quote:

Originally Posted by Jax-dc5r

Hmmm, I'll ring a supplier I know hopefully it Does, I'm
Worried stainless will sound shitty

Never heard of a SS sounding shitty, but I have heard that the SS is quieter than the Ti due to it being thicker. And apparently the welds are pretty bad compared on the SS compared to the Ti.
15-10-2012, 11:08 PM
Jax-dc5r

Quote:

Originally Posted by mcOZ

Never heard of a SS sounding shitty, but I have heard that the SS is quieter than the Ti due to it being thicker. And apparently the welds are pretty bad compared on the SS compared to the Ti.

Also heard both of those myself
16-10-2012, 01:55 AM
Stephen_AUS

Quote:

Originally Posted by Jax-dc5r

I didn't ask about cabin noise

I was just adding to Shakeels 3rd quote ... so u know. You said you wanted to know how loud it would be ... this helps.
16-10-2012, 10:02 AM
butterfingers

thread hijack

weekend car, avoiding police attention is essential above all costs, however i want it to be loud when opened up

between 60rs and rm01-a which one better suits those needs? i also like the blue tip

Show 80 post(s) from this thread on one page