Why is it bad?? I'll just follow ur setup lol. Also could u take one more pic? On the left under side of the intake, when ur facing inside the engine bay. Would be great thanks mate!!!
Printable View
Why is it bad?? I'll just follow ur setup lol. Also could u take one more pic? On the left under side of the intake, when ur facing inside the engine bay. Would be great thanks mate!!!
i saw you today mate, car looks really nice!Quote:
Originally Posted by black8thgen
Quote:
Originally Posted by ekdez
yes for FD2, unsure for FD1.
a member on this forum got it on his FD2, and it works as well without CEL.
as for the injen cai, needs rbc for it
oh reallyy where at?? did u wave???Quote:
Originally Posted by Sherweeeny
well i wasnt too sure it would be you, but i came on later and checked and was like yep defs was you!Quote:
Originally Posted by black8thgen
nah no wave, it was on epping/beecroft road, i was in my civic, tired as shlt and not in the mood for all the bloody traffic
LOL. yeh fuken tell me about it.. and the heat doesnt help at all..... and my gf fighting with me on the phone... man... thats bad LOL
hahaha poor kid! at least ur car is hot! i was thinking of spraying my rims white, but i didnt and now i regret it after seeing how good they looked on ur car!Quote:
Originally Posted by black8thgen
ahaha thanks alot man - go spray em white now!!! =D.
.....i still yet to go spray mine black.......Quote:
Originally Posted by black8thgen
i dunno if anyone has been following zicos story..
but ffs these mirrors are so sexy, i want them
http://photos-h.ak.fbcdn.net/hphotos..._1162171_n.jpg
mark my words im gonna get these.
after i finish paying of my brides. then those are mine!
would they suit the VIP style you're aiming for?
you should convince sitggy to get brides too. Even if it is VIP. You need support for the daily boat ride.
WOW!
i want those mirrors!!
well maybe it will encourage me to stay jdm hahaQuote:
Originally Posted by longers
and im sure he will be tempted once he see's my brides in =]
are you the one he has the bet with?
i could always mix and match mirrors with my wheels haha
i mean my J's exhaust is far from VIP! lol
LOL dez. mix n match is still good =P.
HOW MUCH R THOSE MIRRORS FKKKKFKFKFK
Why are the rear wheels on +ve camber???Quote:
Originally Posted by ekdez
nah thats not me. i can't punish myself like that lolQuote:
Originally Posted by ekdez
i doubt it would be postive camber..Quote:
Originally Posted by evolution
More than likely its just the camera angle
lol its so true hahaQuote:
Originally Posted by longers
i reckon stig would have done something drastic by now..
just think of it on the bright side... no modding = LOTS OF MONEY SAVED UP. provided there is no substitute for modding lol. then he can go buy a new car =P
no modding = still no money
cos im just spending it elsewhere lol
Hahah. Feel so sorry for u
****it, it's not worth investing into a moneypit anyway. Just gonna hurt yourself in the long run when you could be saving for an appreciating asset.
mugen 2 lip?
http://www.jspec.com.sg/product_img/...%20tr%2004.jpg
tell me where i can buy!!!
it is a type R style mugen front lip. it is usually used for the type r bodykit.
i didn't know that it fits 09 model front bumpers
would anyone be able to source these? would love to have it
I wish we could go fast...
[youtube]Jfs-LUtpqgI[/youtube]
so... the postman woke me up at 9:30 today!
cos he brought these
http://i301.photobucket.com/albums/n...y/IMG_3470.jpg
the last two in the set.
so i opened them up and WTF! they sent the wrong wheel :P
http://i301.photobucket.com/albums/n...y/IMG_3471.jpg
but then i took the cover off and boom! sun shine! 19x8.5 +25 weee!
http://i301.photobucket.com/albums/n...y/IMG_3472.jpg
http://i301.photobucket.com/albums/n...y/IMG_3473.jpg
then i opened the last box and sunshine! lol too early to be awake!!
19 x 9.5 +30
http://i301.photobucket.com/albums/n...y/IMG_3482.jpg
http://i301.photobucket.com/albums/n...y/IMG_3483.jpg
http://i301.photobucket.com/albums/n...y/IMG_3484.jpg
you cant really tell from the pictures.. cos they were bad.. soz..
front has a credit card length of dish, and the rear has a credit card and a quarter of dish =]
now time for stretch tires! lulz
Is that low disk or high disk?
Awesomeeeeeee
fresh!! your new nick name is 'boss baller' dez.
look on the sticker and see if it says A or O :)Quote:
Originally Posted by Atjo
the 8.5 looks like A
J'S racing carbon fin spoiler for fd
http://blog.jdmconcept.com.au/js-rac...n-fin-spoiler/
nice wheels dez :thumbsup:
while people are buying more stuff for their car,
i'm demodding mine lol, might as well sell the whole car
incorrect, both are O disk.Quote:
Originally Posted by Stig
pictures can be deceptive.. at the best of time.. i just dont know the camera tricks to make my dish look uber big
oh noiceee
what tire size are you running henry?
225 35 19 Falken 452 on the 9"
225 35 19 KU31 on the 8"... when they wear out im gonna get a 215 35 19 Falken 452
That dish should be around 80mm as mine is 99/100mm for +15.Quote:
Originally Posted by ekdez
Just measured my dish for something to do. 80mm at the back. About 50mm at the front.
So the IS250 is yours? My front dish is 65mm.
p.s. my t1s 8.5 +25 F has 80mm dish and x9.5 +30 R is 90mm
o shiet eh
airbag popped out yo
LOL WTF?!??!!? which one =/.. and how T_T
nah i mean the lex!
LOL!
mm i wonder what nuts to get for the varienza.. i already got red and black work nuts.. maybe a set of those kicks ones..
oh right tim.. LOL.
yeah dez get the kicks, theyre hottt.. titanium =] - i wish i had aftermarket wheels now.. cant have pretty nuts on my rims =[
brides this friday, excited!
yummyyy. sometimes i regret getting a sport =[. damn u tim why didnt i meet u earlier LOL.
ill get brides if you can figure out a way to bypass the passenger air bag light dez :) i gave up
only solution i had was to rip the airbag from the stock seat and just let it hang from the connections LOL
and if acco is to happen,
u have
" ejecto seato cuz!"
sigh :| you saying im gonna have problems? LOLQuote:
Originally Posted by Stig
if there is a will there is a way!
if you dont mind running with the air bag light on all the time then you wouldnt have any problems... unless you get into an accident and i think the air bags dont deploy lol
didnt want to risk it, hence bye bye fd2r seats
might have to take that bulb out hehe
we will see.. maybe i can source a air bag and put it under the seat LOL
p.s. i didnt even know the vti-L had side air bags...
well if you are just running a driver side bride, and oem passenger seat, there is a way to bypass it :)
i got driver and passenger.. haha
i dislike the only one bucket look. makes the car look pov and like i couldnt afford the second seat haha :P yes im vain.
can u tell me about this bypass thing =]
chuck a resistor into the airbag connection for drivers side (only works if the oem passenger seat is in place), think it was a 5ohm 5watt resistor but i forgot
I also wanted to buy sports seats but the airbags have been a pain..however i read on the singapore civic forum that you might be able to buy a sensor diffuser so that the airbag light will not light up
I m not sure how to install the diffuser and hence i gaf up the idea..
SO even i lose the stock seats with side airbag's, would the steering airbag/passenger side airbag deploy if the driver and passenger sensor is missing?
no lol, hence the airbag light is on
if you replace the drivers seat, and use a resistor in place of the drivers side airbag connector, when you crash, the front steering wheel, passengers front and passenger side air bag will deploy which is super
if you replace the drivers seat and the passenger seat, that resistor trick does not work since there is another extra cable for the passenger seat which no one has figured out. and if you crash, no airbags will deploy.
go ask honda for a passenger seat sensor. buy it and just place it under the seat. technically it should work
ill make it work.
might set you back an arm and leg though
stig thought i told you that that second cable was the sensor? unless you can find the specs of the sensor then find a resistor to match the power voltage
yeah cbfd, dont do electrical engineering, no one in the states were able to figure it out as well
so. yeah.. pretty bored atm.. procrastinating instead of doing uni assignments. decided to do a simple chop of my car. mind u this is the 1st time ive tried to photoshop something.
anyway, here's the original pic of my car with my old set of wheels:
http://i43.tinypic.com/1zziakp.jpg
and here is the chop:
http://i41.tinypic.com/242x4bc.jpg
lol.. i like it :p. never got the chance to take any photos of my car with my old 19's on my coilovers, so i thought i'd try n chop it to see how it would have looked.
Ballin' =P.
looks sick! those wheels kinda look like the M3 rims.
air runners baby
Good job on the chop.
hey, anyone taken there front bumper bar off? i just need to know how many clips and screws and also where they located? also i have a mugen kit on do i have to remove that too?
cheers
no need to remove mugen kit, clips n screws underneath the car at the front (plastic ones) - big bitch to remove.
then theres two screws, one under each front wheel fender. and gotta undo clips in the engine bay (the grille and the side thingys lol)
hey guys what do you thunk about the jdm concept carbon fin spoiler rice or what?.. i mean its just double sided 3m tape yeh stuck on if you dont like it u can just rip it off yeh?
tried that already, srs reset works... but you gotta do that everytime you start up your car and it got annoying if you want both seats in the carQuote:
Originally Posted by ekdez
also it says that you need the passenger side seat for it to work :)
lol unlucky dez.... what a bitch to change seats =.=...
so do we have air bags in our seats? or in the pillars?
because if its just the sensor then.. arent air bags a failsafe anyhow..
so if you get hit on one side that whole side's air bags will pop no matter what...
remembering air bags can only do so much.. :P
airbags are in the seat
i swear there has to be a way!!!
there is, buy a vti LOL