Headunit was out when i got it.Quote:
Originally Posted by Philip Lee
Printable View
Headunit was out when i got it.Quote:
Originally Posted by Philip Lee
sorry mate, i seriously can't remember.Quote:
Originally Posted by derby23
but i have used it abit and honestly it's not very good. the paint is water based and very thin so it doesn't cover up too well and need to reapply a few coats.
i wouldn't bother getting them unless u're in japan. just go to a local smash repair and ask them to do up a small can for you.
but you still need to pull everything out to install HU right?Quote:
Originally Posted by Perry
no worries.Quote:
Originally Posted by Twest
there are a lot of information on UK forums such as this one.
oh cool. thanks man!
[QUOTE=Philip Lee;2645861]but you still need to pull everything out to install HU right?
Yep still need to pull the trims out to install the unit.
did you get the one with the blackened headlights and ambers?Quote:
Originally Posted by Antv
Hey guys somethings wrong... when i start the car and when its nearly warm, the engine just revs by itself between 1-2.5k rpm like someone is tapping the accelerator every second (hunting?). So i turned the car off and then it wouldn't start. Tried to start it again 2 hrs later and same revving thing happened. What to do now?
Have you done any mods?
Sounds like an air leak! ie... vacuum line off.
Ive had an injen cai in for about a month. And no problems occured till now.Quote:
Originally Posted by Nepolian
Its exactly like this: http://www.youtube.com/watch?v=jgji-Pffrjg
I've got an injen cai and mine does the same at times but on when it's cold. I just assumed it was just coldQuote:
Originally Posted by wtfhax
Really?! When I started in cold it would idle like stock airbox.. starting at ~2k and just go down slowly, and that was it...Quote:
Originally Posted by white_ep3_civic
So I dont think its just cold start and/or cold weather. (it was warm today anyway haha)
Just check all the rubber hoses mate :)
Regardless of weather or temp, the idle should not fluctuate like that!
If in doubt, take it to Hanny's. When I was getting a service done, a guy in an EK had the exact same idling issue as yours, wtfhax and brought it in to be fixed. Didn't stick around to find out what the issue was though.
i saw a black ep3 going down horsley drive 2night prob around 6:45 ish. Anyone from here ?? was at smithfield
Just reading the UK forums and most say to go for a drive and hope it sorts itself out or to clean the idle control valve.
Anybody done this?
Oh and saw a facelift cw ep3 this arvo near IMG, asian guy driving
I got the same intake no problems, I think dirt go into the TB.
that's me on the way to check out the receptionist at IMG hahahahaQuote:
Originally Posted by wtfhax
hahaha u drove down from queensland to check her out ?? dedication ! !Quote:
Originally Posted by Philip Lee
lol i cant tell if you're joking or serious.. hahahQuote:
Originally Posted by Philip Lee
Hey has any of you guys got a exedy sports organic clutch on your ep3? im getting mine put in on thursday and im replacing my gearbox oil to redline oil. If you got the clutch could you tell me how it goes. Cheers
oh and which oil would you use!!!
My car does that 24/7. When i installed the cams and kpro the tuners tuned it like that. Pretty buff i'd say :thumbsup:. Shouldnt be a major problems, should be just your cams.Quote:
Originally Posted by wtfhax
Sports organic feels almost stock.....wouldn't know it unless you're told!Quote:
Originally Posted by typeRr
Just use Honda MTF, unless you track your car all the time!
Are you serious?Quote:
Originally Posted by typeRr
Anyone had to replace their tie rod ends? what're the symptoms?
Play, knocking sound...the usual stuff!Quote:
Originally Posted by c01567
Takes 2 mins to check!
Yep, i love it! lol when your at the red light next to someone they froth nutsQuote:
Originally Posted by Nepolian
And are you serious that it feels stock? shattered. My mechanic said it should be like 20% harder to push... hmmmm
Wondering if anyone know whether the Buddy Club Short Shifter for our car is a shorter throw than our Type R's, or if its just shorter relative to stock Civic Si's (in the states).
Why would you want a hard clutch anyways?Quote:
Originally Posted by typeRr
Aslong as there is enough clamping pressure it's fine.
u want a shorter throw??Quote:
Originally Posted by Jibz
i find the stock pretty good already. i hate having to use higher force to change gear as some short shifter requires.
hey dude when you get it done, let me know how it goes and if you dont mind, how much labour set you backQuote:
Originally Posted by typeRr
480 for clutch 450 for labour 44 to machine the flywheel and 160 for the redline oil. :) should be goodQuote:
Originally Posted by icecrm
Everything seemed reasonable until...........................WUT!!!Quote:
Originally Posted by typeRr
lol.Quote:
Originally Posted by Nepolian
i'd just use Honda MTF06. 3 x 1 little bottle = <$50.
haha **** it, you gotta pay to play anyway. im just shattered that my clutch started playing up on the same day my rego came home! ANOTHER 600 ****!
I use MTF06 in my gearbox and I personally reckon it works great. Ive tracked my car twice with the stuff aswell and it holds up great under my sloppy driving. People say I hoon aswell so I say it works great under them conditions aswell. Having said all that I haven't used any other box oils
I got the Exedy Sport Organic clutch. It's only abit harder than stock. Didn't really feel a difference but mine shatters when it's cold. It bites abit better than stock but not really much difference.
:thumbsup:Quote:
Originally Posted by SuperSteve
i read horror stories using non MTF06 and i'd definitely stick to this stuff.
was anyone in parra around 8-ish ?
was white with black-ish rims and i think.. smoked headlights?..if thats possible
im getting ce28s for me ep3! ANYONE WANT te37s bronze? if your interested name your price!
swap ya oem ep3 wheels ;P
lol no thankssssssssssssss
how much for the te37s! pm me
Did it have FL headlights?Quote:
Originally Posted by Rivenscyr
sorry, no idea.Quote:
Originally Posted by Perry
just saw it and was gob smacked at how awesome it looked xD
plates were like : BA.20.Ni
Must be Xcon's old car than.
hey guys
for all you people that think im a hoon.... this guy is my hero
http://www.ozhonda.com/forum/showthread.php?t=127836
guys im looking for a kpro!! anyone selling? :P keep an eye out for me!
No, don't want a shorter throw, but I'm interested to know because my stock shifter seems to have a bit of play in it, I put in some shifter bushings but while it helped give a more solid feel when slotting in a gear, the wriggling at any point seems to be the urethane ball thats slightly worn after all the use.Quote:
Originally Posted by Philip Lee
http://www.ozhonda.com/forum/showthread.php?t=127878 thought id show off some of my photography and yeah my cars in some of the photos :) enjoy
Hey rai-c nice pics man. We should hav a photo shoot.
By we I mean every1
would you guys from sydney drive half way to melbourne to meet up? sexxxxxx
yeah next time a meet up that i can go to is on.. its always so early! haha
If u can convince the IMG chick to go I'm down for it :)Quote:
Originally Posted by typeRr
lets have a meetup AT IMG.. :O
and take pic of the chick. :wave:Quote:
Originally Posted by Rai-C
We should have a photoshoot inside Gavin's warehouse it will be awsome and we could promo his business as well.Quote:
Originally Posted by SuperSteve
i highly doubt he'd move all the cars out for us man.. lol as if he'd just park like 10 x $200k+ luxury sport cars on bombay st, just so a few $25k hondas can take a few happy snaps hahaha
Drove past IMG today and drove slowly to look inside and the chick comes out staring! LOL
lol ! busted !Quote:
Originally Posted by denrie
haha AUS EP3 national MEET im down when its in melbourne
anyone tried Scan Gauge on the EP3? works fine?
looks like i'll be flying down to Sydney end of June. organise a cruise to IMG? lol
quick question, does 17,8,+30/17,8,+35 fit our car?
yes but will need front camber and roll rear guardsQuote:
Originally Posted by ITRDC2
Done i'll ask Gavin about photo shoot in the ware house hehheheh his a nice bloke im sure his willing to share the warehouse for a few hours.Quote:
Originally Posted by Philip Lee
Oh nice ! I would luv to see the chick lean over my car for some photos :DQuote:
Originally Posted by Perry
LOL...good luck trying, think it might be hard...Quote:
Originally Posted by Perry
Steve, don't you have a gf who can do that for you? :pQuote:
Originally Posted by SuperSteve
I'll ask.Quote:
Originally Posted by NightRyder
Has any1 here opened up their head lights?
Sorry to be a party pooper, but wouldn't you have to run it by Andrew, the owner, and not Gavin Perry?
Trying to source out walker front lip in cw , pm me if you see anything! Thanks. :)
yeah gavs the salesman. i believe andrew and that guy with the glasses, i forgot his name, are co-owners.
ugh.. this thread is making me miss my old ep3. is the bloke i sold it to on ozhonda, think you were a lurker, anyways pm me, i want to know how suki is doing.
aww you named it suki lol i named mine annabel
Buff front lip :) I should be getting mine soon. There's a store with them in stock in melbourne. 1.1k just for the front lip. KILLERQuote:
Originally Posted by derby23
ey typerr which store is it??? pm me if u want =]
I would like to know aswell. I want one :)
ahhh man, got 3 offers for my car all under 20k, seriously ppl just dont no wat an ep3 is worth, such timewasters lol
Under 20! Even dc5's sell for more. I went too get a trade in price and they could only offer me $17k at most.Quote:
Originally Posted by Mugen_B16B
But trade ins are always low.
I'll try what I can if it goes through u guys igor for a little meet there?Quote:
Originally Posted by derby23