-
hey guys..
as u guys may noe i went and lowered my car a few months ago
i went today to a normal tyre shop to get an alignment ..
drove up the ramp ping.. the car touching the flaps on the ramp..
too low
then i went to pedders.. they shock their head and suggested me to go to the tyre factory cause they have pitted wheel aligner's
so i went there and got a quote for 65 bux..
i told them for sure it wont fit, they said it did..
and guess wat?? doesnt even fit!!!
my car is 1 fist high from ground to chassis
half a fist to the exhaust...
thats only a 2 1/2 inch drop
he even said its lower than superlows..
i learnt my lesson
:)
being low is kinda unique..
no one can fix it hehehe
Ken
-
man, thats crazy :) .... unique yes, but kinda impractical dont u think? lol
-
yeh i noe..
these springs arent compressed and not chopped
just tanabe super down procedeos..
shows u guys how the roads are like in japan..
flat and smooth unlike here in austrlia!!
even i dont noe wat the inches is dumped atm..
maybe 2 1/5 - 3 inch
dam..
its weird
for an accord.. people look and think.. hey..
looks PHAT too
:P
Ken
-
hehe man it does look phat, but too impacticle for me...
i dun wanna be sittin like a see-saw on my drive way!!
-
That's mad!! 8)
Please post a pic. What's your ride like? How about your camber?
Raz
-
i had no problem getting mine aligned, went to Quickfit, their hoist is level with the ground with no rise at all.
In and out for $30, toe and castor all good, camber at -3 degrees and not moving unless i get a camber kit ;)
-
i got that done pete.. its called a pitted liner
couldnt get my car on any of the 2 they had
here are some pictures..
http://www.aussiewheels.com/profile/Images/fullsize/457
http://www.aussiewheels.com/profile/Images/fullsize/458
http://www.aussiewheels.com/profile/Images/fullsize/410
dere u go guys
doesnt look to low.. but when u look under the car.. it sure dam low
:P
Ken
-
lol yeh, it doesnt actually look that low in the pics :D how far is it off the ground in cm? :D
-
from the ground and touching the chasis is less than a can heights..
say a tennis ball can merely fit
Ken
-
that looks hot man ... but luckily mine was only lowered by 1 1/2 inch because i wouldnt want it too low, yours dont look it, it just looks phat! nice car man...
-
Do you guys have ride height laws in oz?
In NZ it's 10cm from ground to lowest part of chassis, including exhaust, but not kits.
I have a 1.25 inch drop, and I sit 20cm from the ground to my factory exhaust on 15" wheels with 195/60's.
A can is 12cm high....but a tennis ball??? :P
Raz
-
anyone got a lowered accord in syd i can look at i wanna lower mine but dont know by how much
