Hey guys,
Ive searched the forum and couldnt find anything about mounting points for rails, but i was wondering if replica Recaros have the same mounting point as genuine recaros?
http://i50.tinypic.com/hwia6a.jpg
Sorry for the noob question! :o
Printable View
Hey guys,
Ive searched the forum and couldnt find anything about mounting points for rails, but i was wondering if replica Recaros have the same mounting point as genuine recaros?
http://i50.tinypic.com/hwia6a.jpg
Sorry for the noob question! :o
depends on who made the replica...
Can you take off the universal rails and measure the mounting points
Umm not really sure who made the replicas, bought it off some guy on eBay and he said it was FIA approvedQuote:
Originally Posted by curtis265
What do you mean? you mean from the top holes to the bottom holes in the picture? or where the sliders mount onto the seat?Quote:
Originally Posted by dorikin
The measurements from the 'top' hole to the 'bottom top' hole is approx 28cm, and the width is about 40cm, dunno if that helps or not
nah mate where the rail mounts onto the seat. you're asking if genuine recaro rails will fit, well you need to measure the bolt holes on the actual seat and I'll tell you if its the same
http://i.imgur.com/xgcBF.gifQuote:
Originally Posted by mcOZ
oh okay, i just measured it just then and basing this on the picture, the top mounting point is approx. 15.5cm from the edge of the seat and the bottom mounting point is approx. 6.5cm from the bottom of the seat and also it is about 28cm inbetween the two mounting points.
Sorry if the explanation doesnt make much sense :(
yeah i know :( but its a brand new blue set for $500 and i couldnt resist hahahQuote:
Originally Posted by trism
28cm from top to bottom hole? On the seat not the slider
Yeah it was about 28-29cm on the seatQuote:
Originally Posted by dorikin
recaro 23.6 and 26.1
Ah okay, thanks for the help!