EK suspension fit EG civic ?

Sup guys just brought a eg and my mate got ek suspension with lowered spring. Will it bolt on or do i have to do mods for it to fit ?

Cheers guys

couple of threads on here but if im not mistaken the front is same and the rear is dependant on the LCA

Yup.

Swap yokes over on the front and it will bolt in (ie put your yokes on the EK units). Rear will need different LCA's to fit.

Cheers guys
Want LCA's do i need to get ?

keep your lcas get the grinder out and grind the middle bushing for the tightass way. or buy press in an ek center bushing on the lca

or just buy ek lca. they go for dirt cheap anyways save you the hassle of screwing up or pressing new bushings in given the ones on the lca are fine

Quote:

---

Originally Posted by kevinnguyens

or just buy ek lca.

---

no.

wrong length.

negged.

Quote:

---

Originally Posted by mocchi

no.

wrong length.

negged.

---

x2 negged for giving life threatening advice

hope op hasn't followed it

this is the type of advice that puts people in hospital, or worse yet..........underground

ahh soz guys was under the impression that the bushings were the difference

Cheers again guys.

So just buy ome EG LCA and they fit onto the Ek suspension ?

Yea mayb not grind it got 2 young kids in the car

Edit: Apparently the photo below is a DC2R (tho that's the type I have fitted on my EG6). EG LCA's are geometrically the same, so the length is wrong for installation into EK, or vice versa. EK LCA shown on the Bottom
https://lh5.googleusercontent.com/-E...o/IMG_4064.JPG

Edited and removed other photos to avoid confusion