Printable View
Just wondering what exhaust systems are available for the Civic VTi-R? I would be looking for a complete bolt-on system including headers. I have had a look at Spoon and Toda but they seem to only do exhausts for the Civic Type R. Will the Type R exhausts fit a VTi-R? If anyone can recommend anything please let me know.
im pretty sure they will yes.
most name brands do it for the ek4
Civic Type R is a b series engine
so it will fit, im not sure abt the sensors but correct me if im wrong.
:)
Trust also do bolt ons if it's for a EK4.
SPOON!
they actually make headers for the EK4
the b-pipe and muffler are the same for all EKs
from wot i understand, headers made for the b18c(teggy type r) n b16b(civic type r) are all interchangeble with the b16a (eg6, civic vti-r, del sol) howeva exhausts are not due different chassis lengths and mounting positions, hope that helps:)
does this thread also apply to EM1s ? i.e: Interchangeable between EKs as well as EM1s?
Thanks.
Correct me if im wrong but i was told that the ek, eg, dc2 all had interchangeable exhausts/suspension so if this is correct i guess u could get sumthin from a dc2? dont quote me on this tho
No i don't think the exhaust systems are interchangable.Quote:
Originally Posted by crispy
depends which VTI-R you're talking about, if the EK4, it should fit.. if the EM1 it most likely won't (without modification) since the chassis is longer..Quote:
Originally Posted by SiR CRX
Extractors are all the same on all B series engine (except US spec due to the clutch slave being on the other end) THe only difference between the remainder is of the shape of your car. All ek hatches are the same, most of the sedans are similar also.
You should be able to get the extractors and mufflers and get the rest made up by an exhaust shop.
Cheers guys much appreciated. I would like to steer clear of exhaust shops and go with proven brands as I would much rather go for quality over saving a bit of money. The car is a VTi-R hatch too. I am looking at the Buddy club system and Spoon headers, does anyone have any experience with the Buddy Club exhausts?