- 
	
	
	
		Oil breather thing 
		Guys
 
 Just looking at a old mag and i saw BADHBT's integra
 
 Was looking at the engine bay and noticed a little mini Air filter coming out of the head, like where a oil catch can, or normally where it connects to air intake piping ( sorry hard to explain)
 
 what is the purpose just for dress up ???
 
 see below sorry to the owner of the car just found in gallery
 
 see the pipe behind the oil filler cap that thing hehheh im so vauge
 
 http://www.ozhonda.com/gallery/water...icture_179.jpg
 
 
- 
	
	
	
	
		injen CAI ??
 thats all i see lol
 
 
- 
	
	
	
	
		ok crap that pic is a bad example ahahah
 
 the black pipe
 i think it lets air outta the Head, then it goes to the intake piping
 but im thinking that a tiny bit of oil might escape to i dunno im no car genius
 
 
- 
	
	
	
	
		circle it with ms paint or something lol 
 
- 
	
	
	
	
		yeh man i know exactly what you mean ive seen it too but also didnt know what is for, its like a min air filter about 1.5" thick that is mounted on the side of the rocker cover. not sure what is does tho? :honda: 
 
- 
	
	
	
	
		hhahaha ok
 
 here goes
 
 Again sorry to owner of car just a good example
 
 ok the red circle shows were it exits the head
 the arrow ( looks like a arrow lol) is the black pipe going to the intake piping
 
 ok any better Kenshin :)
 
 http://www.ozhonda.com/gallery/water...1watermark.jpg
 
 
- 
	
	
	
	
		do a SEARCH & u may find it - i saw it ages ago here @ O.H. one of the member ask a similar q's bout the 'breather' & 'oil catch can' 
 
- 
	
	
	
	
- 
	
	
	
	
		its an emissions thing, put on there to catch the fumes coming from the top of the head, some cai kits dont have the inlet for the piping so people will put a mini filter on there just to filter the shit which comes out of it. 
 
- 
	
	
	
	
		So will a little filter stop the oil, casue in that post they say it makes a mess in engine bay 
 
- 
	
	
	
	
		the filter will not stop the oil, as that is what an oil catch can is for, the only time oil will come out of there is if you are cornering REALLY hard enough for oil to go up into the release and flow through, doesnt happen much. 
 
- 
	
	
	
	
		Yeah it shouldnt happen to much on the streets of sydney hahaha
 cool thanks for all the input guys