Printable View
hi guys, im looking to buy a set of Red llock nuts (maybe rays if they fit) , my current rims are lenso replicas which need the allen key type lock nuts, will rays fit on these rims? if so which one :S
thanks
heres a pic of my rims :
http://xposed.au.com//photos/resized...2_000_0051.jpg
yes theyll fit, theyre 'basically' universal made to fit all rims.
oo alright so definately fit?
it aint gna be to big like normal nuts?
how are normal nuts 'too big' for your wheel?
they are to fat to fit in the whole!
thats why i wna know, allen key nuts fit coz they are slim.
any1 ?
how bout u measure your slim lock nuts and maybe someone with rays can measure theirs and ull know cause from what i know rays lug nuts are ment to replace the stock ones in width.
it would be 1.5"
these are basically the nuts i got now :
http://www.ebay.com.my/viItem?ItemId=230140916621
they will look good with ur rims :D
hahaha yeh im after red ones! but im not sure they fit, i found some :
http://www.musecret.com.au/category/3
But im pretty sure the normal ones, the bottom which is like a cone is to fat on my rims
P.S they are called lug nuts. Lock nuts have a special key.
If your still struggling autobarn sell lug nuts with a special key which are thin to fit all rims.
In my experience the allen key type have a tendency to break/become rounded. I've had to weld on the allen key twice to get the rims off.
It usually happens cos of stupid tyre places putting them on too tight or they get seized on. Also some of them are just not good quality. If you use the allen key type make sure you inspect them each time to take them on and off to make sure they are not gonna break. And NO you cannot chizel them out as most wheel that need them will not have any room. I spent quite a long time on the prob until i got the autobarn ones
The autobarn ones i had have been the best since, never a prob for like 5yrs now.
which one look better long or short nuts??