I have an EK and looking to do power window conversion
question: Is it possible to use OEM power window internals from a door that belongs to an EG/DC2 ?
Printable View
I have an EK and looking to do power window conversion
question: Is it possible to use OEM power window internals from a door that belongs to an EG/DC2 ?
Let me ask... what EK came without power windows?!?Quote:
Originally Posted by zco
EK CXiQuote:
Originally Posted by Kiz_EG6
the eg/dc use different regulators to the ek so unless you want to do some crazy hacking and modding no
fark power windows.. weighs the car down...
lexan or a simple net would be good for your daily
bump for this.
how 2 do and how much.,!
go to a wrecker and find a car with it.
get doors
swap doors
doneski
trism... dude not that simple... u gotta get hte harness and wiring.. then connect to the battery then go thru the fenders then thru the door then connecting to the fuse box or if u got a 4 door then ur more fukd wif stripping the whole car down and wiring all the ova the joint! GG 4DLULZZ
buy two doors complete with power options then run new wiring and regulators
it cost me 400 for two doors and 100 labour so 500 all up
i did this on a eg thou it also had the power mirror option too
this is the best way with less hassles
did u take it to an car electrican to do this lan?
casue u do it urself with ur existing door.. all u need is the next model above with power windows options..
EG. zco has a cxi i believe.. so grab the trims off a gli and regulator and wiring and switchs from it aswell.. and go from there.. not a simple thing to do but can save u money
i took it to my mates place
it is a pain to put power regulators/etc in door
just get complete ones
hahahah i know i was being a tool lolQuote:
Originally Posted by MikeyG