Hondata S100 ~ D16 -> B18

Can you use a Hondata S100 that was from a D16 for a B18 if it is retuned ?

and for this

Quote:

---

Hondata OBD1 Replacement ECU with OBD1 Connector + the cost of either a s100, s200 or s300.
$550.00

Hondata OBD2ab Replacement ECU (for 1996 to 1999) + the cost of either a s100, s200 or s300.
$650.00

---

Does that mean i can keep my stock ECU, and they chip it with I.e. Hondata S100 for only $285 ?
Im just abit confused with how all this works....

Yes you can use the S100 from a D16 for a b18c but you will need to get a new tune.

Alot of people get confused with how hondata is priced. That $285 price is for the hondata 'CHIP' only. You will still need an OBD1 P28/P30/P06 ECU and also pay a chipping fee.

So if your ECU is one of the above and OBD1 then yes you can use it.

Yea its kind of confusing...
thats where i was also stuck, do i need OBD1, because i always though you did, but then it says

Hondata OBD2ab Replacment ECU + the cost of either a s100, s200 or s300.


Why would you want a Hondata OBD2ab Replacment ECU if its non-compatible with OBD2 ??

because you need a OBD1 ECU to chip and your current obd2 will not allow chipping. So you need a complete replacement + a conversion harness.
If you have OBD1 they usually give you the kit and you do your own conversion or pay for your own ECU to be converted

Quote:

---

Originally Posted by 1996ek1

Yea its kind of confusing...
thats where i was also stuck, do i need OBD1, because i always though you did, but then it says

Hondata OBD2ab Replacment ECU + the cost of either a s100, s200 or s300.


Why would you want a Hondata OBD2ab Replacment ECU if its non-compatible with OBD2 ??

---

Quote:

---

Originally Posted by 1996ek1

Why would you want a Hondata OBD2ab Replacment ECU if its non-compatible with OBD2 ??

---

Just think of it as an OBD1 ECU with a conversion harness built in.

K so i do need P28 (best option i guess)
Then i have to send it to Hondata to get chipped

Then i need a OBD2 -> OBD1 conversion harness, then take it for a tune

You dont need to send it to hondata to get it chipped. There are people in aus that can chip it for you.

And like you said, conversion harness and tune.

u can also use a obd1 p72 ecu

Quote:

---

Originally Posted by SLOWEGG

You dont need to send it to hondata to get it chipped. There are people in aus that can chip it for you.

And like you said, conversion harness and tune.

---

Sorry i meant a hondata distributor in aus.
Will someone like TODA RACING chip it for me?

Yeah Toda Racing is by far the best option for you if your in NSW

Quote:

---

Originally Posted by jooboo

Yeah Toda Racing is by far the best option for you if your in NSW

---

Sure am.

So i can just take a OBD1 ECU in to them, and they will chip it with hondata S100 (most likely what im going to get).

Then conversion harness, and get them to tune it for me and im all set.


Thanks for your help guys :thumbsup:

toda send it down to james in melb to get it chipped and get it sent back ..
he told me dat when i enquried abt it a while back