Disconnecting DC2R antenna?

Hey guys, does any1 know how to disconnect the dc2r antenna whilst still being able to listen to the radio?

No antenna, means no reception.
No reception usually means no radio lol... or really poor quality radio.

Dont think its possible mate.

Quote:

---

Originally Posted by type_r_118

Hey guys, does any1 know how to disconnect the dc2r antenna whilst still being able to listen to the radio?

---

???

You mean so it doesn't go up when you turn the radio on, but the antenna itself is not unplugged.

There is a specific cable coming from the loom which controls this, you will just need to cut it and seal it off, i can't find a wiring diagram at the moment, but it shouldn't be too hard to get your hands on, it may be written on the cable when you pull the unit out!!

yeah, ive heard the reception isnt affected too badly?? Anyone know from personal experience? Does anyone know which wire it is on the wiring loom?

Quote:

---

Originally Posted by Kiz_EG6

???

You mean so it doesn't go up when you turn the radio on, but the antenna itself is not unplugged.

There is a specific cable coming from the loom which controls this, you will just need to cut it and seal it off, i can't find a wiring diagram at the moment, but it shouldn't be too hard to get your hands on, it may be written on the cable when you pull the unit out!!

---

dont bother cutting any cables, replace the original antenna with a s2k antenna.

Quote:

---

Originally Posted by Q_ball

No antenna, means no reception.
No reception usually means no radio lol... or really poor quality radio.

Dont think its possible mate.

---

Like Q said no antenna no reception.
you might be able to get some of the bigger radio stations but it will be all static and will cut off when u go past trees and or when the little signal gets blocked.

Quote:

---

Originally Posted by jords

dont bother cutting any cables, replace the original antenna with a s2k antenna.

---

What jords said is prob ur best route. get an S2K looks better n u still get 100% reception/signal.
Thats what I have on mine anyway and have had no problems.

s2k antenna is fugly as.

I like the big DC2R antenna, makes me feel like i'm driving an RC car :)

just cut the (blue/blue and white from memory) triggerwire.
if you pull up the antenna by hand you'll still get pretty decent reception. but why not just fix it.
s2k antenna looks sweet imo.

I don't think its the blue blue wire.

Its the thinner yellow green wire. Be careful because there are two yellow/green wires and one is for the fuel pump. Cut the wire and put a switch into place so you can make it go up an down when you want.

Its the blue/blue white wire that says remote antenna. (look at the HU usually has a separate wire)
triggers the antenna to go up.

Quote:

---

Originally Posted by Kiz_EG6

I like the big DC2R antenna, makes me feel like i'm driving an RC car :)

---

Haha, I wanna get my antenna removed the whole filled up