Does any1 with a b16a swap suffer from bogging or hesistation ? My car does sometimes when its hot... any 1 could help to elimate the problem ? the car is a crx with a b16a swap..
Printable View
Does any1 with a b16a swap suffer from bogging or hesistation ? My car does sometimes when its hot... any 1 could help to elimate the problem ? the car is a crx with a b16a swap..
sounds like a dizzy problems mate. my car a while back would do similar, i just cleaned out the dizzy which fixed them problem. possibly the rotor not makeing 100% contact with the leeds?
Sceck Your Dizzy, Leads and Plugs, Also check that your TPS is set correct, did you emove it for any reason?
As above + Clean out the throttle body & change the Fuel filter.
will give it a try.... the car mostly will bog when on freeway travelling at 100... if i step more fuel... it tend to bog.... no power.... n have to release the gas then step again.... tats the weird parts...
N how can i tell tat i'm running obd1 or obd0 ? check the ecu... n its throwing a code 2 which is the secondary 02 sensor... n also my car currently onli wired up 1 02 sensor... which is a 4 wires 02sensor..
any more clue ???
my car (civic vtir b16a2) is similar but not on highways n stuff, mine hesitates a lil when cold (which is probably normal) and sometimes when warm but mainly on 3rd gear, example, i apply a 1/4 throttle (wateva it is cant be exact) and the car will rev up n go like its sposed to but very slowly then when i hit like 3 rev wid the same throttle it feels like it just gained some power lolz can feel a little bit of gforce. hrmmz does that makes senses to ppl lolz, to fix this i got sparkies, leads but havent put them in yet to fix, i cleaned throttle body ... now just to try itwid sparkies n leads, will update this thread n tell if fixed at all.
genkimashi: Sounds like it is an O2 sensor playin up. I have the same problem in my barina and it needs a new O2 sensors :(
andiiso: i think your problem is that the b16 has no torque down low at all. lol Get used to revving the shit out of it to go anywhere! :thumbsup:
well nah i noe its got no torque, but it still shouldnt just all of a sudden pull in even tho im using the same amount of throttle goin past 3k, should b smooooooooth regardless of it havin power or not
last time i had a similar it was the fuel filter. Does it get worse when you go uphill?Quote:
Originally Posted by genkimashi
the second o2 sensor is the cat sensor, unless you have a b16a1 which i beleive had 2 o2 sensors on the manifold.Quote:
Originally Posted by genkimashi
Anyway an o2 sensor will generally not bog you. It just makes it run rich and increases your fuel consumption. You have to rem that the factory ECU has set as to how much fuel/air it provides
Check your sensors on the TB are working fine.I'm going through a similair thing.I reckon I need a map sensor (the one on the top of the TB).I'll know on wednesday :) but the cold air control valve sensor (the sensor on the bottom of the TB) went already.My car has done 92,000km.
I heard you could take out the O2 sensor and it wouldn't make a difference.A guy that owns a muffler shop for 15 years told me...