[DIY] Honda Civic EG - s2000 Start Button Install
Disclaimer: The following is provided as a GUIDE ONLY, and neither myself nor Ozhonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!
Tools Required
1. Honda Civic Eg
2. Wire Stripper + Kit
3. s2000 Start Button
4. (Optional) Double Din - Sex Factor
5. Screwdriver
Method
1. Locate your under dash cover (underneath your steering wheel ==;; ), remove the three screws.
2. Presented in front of you is your fuse box, probably some stereo wires for dodgy factor and possible alarm system (get one, do it!).
3. Locate the following plugs. These are the two main plugs which operates your ignition. This means you still need a key for the steering wheel yo!
http://suijin.amestris.com/Honda Civ...82008(003).jpg
http://suijin.amestris.com/Honda Civ...82008(004).jpg
4. Alright we'll start with the second image. The top image displays a plug from the ignition to a portion above the fuse box. With two wires. exiting and entering. One wire being white the other being black and white strip.
5. Strip a part of the black and white wire or slice it apart if you wish to disable key start completely. (Please not do not slice unless you've fully tested its functionality.)
6. Now the first image. The plug has three wires, yellow, white with black strip and black with yellow strip. Start stripping the black with yellow strip wire. (Do not slice - Beware this wire contains a constant 12V therefore do not let it touch bare metal).
7. Alright hoping you have yours s2k button all ready (If you require some help setting up your s2k button message me and i'll post a DIY).
8. On your s2k button there will be three wires leading out of the fuse. 2 Red and 1 Black. Red (30) and Red (87) Black (86).
9.- Red (30) leads to the wire stripped/sliced on the second image. (Black w/ White Strip.)
- Red (87) leads to the wire stripped on the first image. (Black w/ Yellow Strip.)
- Black (86) grounding, attached this to any metal close by. (Underneath the steering wheel one of the steering wheel cover screws will be fine.)
10. Input your key turn til all electronics are on. This also disables steering lock etc. Test your start button.
Setup example with double din...
http://suijin.amestris.com/Honda Civ...82008(001).jpg
Anyone living in Melbourne feel free to message me to request help on setting this up locally.
