YBOOST new PB!!!

Printable View

16-10-2008, 02:47 PM
YBOOST

YBOOST new PB!!!

Went out to WSID for 2nd time since K swap still with toyo street tires and standard suspension.

The car weighed in at 1033.5kg without driver.

It was a good night, all up i got 8 runs!

Launching at 2500rpm i kinda got 1st gear worked out with little bit of wheelspin but 2nd gear is completely no traction, Flat shifting 3rd, 4th and 5th gear i ran a best time 12.907 @ 111.23mph with 1.973 60 foot.

The other runs were all around 13.0 - 13.2.

Hopefully next time i will have good suspension and SLICKS!
16-10-2008, 03:01 PM
2MPRSS

hmmmm niiiceee this k20 engine?
16-10-2008, 03:14 PM
YBOOST

yeah, best upgrade!
16-10-2008, 03:26 PM
EG5

JDMyard ! :)
16-10-2008, 03:32 PM
ALLMTR

Well done. Who did the conversion?
16-10-2008, 04:10 PM
Weq

60ft is great.
16-10-2008, 04:19 PM
mr_vtec

thats actually one crazy 60ft for street tyres man..
people do that on semis lol.. even drag radials..
16-10-2008, 07:30 PM
xtercii

very nice, what weight reduction if any have you done?
16-10-2008, 08:58 PM
trism

Quote:

Originally Posted by xtercii

very nice, what weight reduction if any have you done?

stripped out rear i belive
16-10-2008, 08:59 PM
YBOOST

Quote:

Originally Posted by ALLMTR

Well done. Who did the conversion?

JDM Yard put it in. Well done boys!!!
16-10-2008, 09:01 PM
YBOOST

Quote:

Originally Posted by trism

stripped out rear i belive

yeah driver seat only.
16-10-2008, 09:16 PM
BADHBT

Quote:

Originally Posted by YBOOST

JDM Yard put it in. Well done boys!!!

:wave::wave::wave::wave::wave:
16-10-2008, 09:20 PM
IEVAQ8

very nice times...............
16-10-2008, 10:04 PM
markoJEK1

good work , quick outing since your first haha, cant beat been keen
17-10-2008, 12:14 AM
GSi_PSi

thats nice times.. makes me wonder wat times k24 conversion would make in dc2?>
17-10-2008, 02:40 PM
jords

is that a stock k20 with I/H/E ?

or are there any other goodies inside?

congrats on the PB.
17-10-2008, 02:54 PM
delsol9000rpms

from what i know I/H/E+ IM &TB tuned with a KPRO... internally stock jdm k20a... if im wrong the owner can correct me
17-10-2008, 02:58 PM
[ricer]

good work man!
17-10-2008, 03:15 PM
YBOOST

Quote:

Originally Posted by delsol9000rpms

from what i know I/H/E+ IM &TB tuned with a KPRO... internally stock jdm k20a... if im wrong the owner can correct me

sounds like you done ur research. thats all the mods :thumbsup:
17-10-2008, 05:29 PM
DNYALL

Nice work man!! K20a swap is the bomb!!
17-10-2008, 07:13 PM
ALLMTR

I disagree on both counts
17-10-2008, 09:15 PM
EG5

Quote:

Originally Posted by ALLMTR

I disagree on both counts

:thumbsup: every single weight reduction counts. Been there , done that.
I used to get stuck with 12 sec pass . Weight reduction help alot , do it all out not just taking seat and trims out.
17-10-2008, 10:35 PM
ALLMTR

Yeah unless you are after every last tenth, then it is hardly worth it. It would be really interesting to see what a K motor would do in a light chassis...
17-10-2008, 10:36 PM
EG5

Quote:

Originally Posted by ALLMTR

Yeah unless you are after every last tenth, then it is hardly worth it. It would be really interesting to see what a K motor would do in a light chassis...

K motor in a light chasis goes real quick , just like G&J AH civic
17-10-2008, 11:13 PM
ALLMTR

Nah I mean really light
17-10-2008, 11:16 PM
[ricer]

some one built a clubman kinda car here with a k24... track down the thread
18-10-2008, 10:55 AM
rawr

Quote:

Originally Posted by ALLMTR

Nah I mean really light

get someone to run their ariel atom :)
18-10-2008, 12:35 PM
delsol9000rpms

Quote:

Originally Posted by YBOOST

sounds like you done ur research. thats all the mods :thumbsup:

lol ye you told me in the pits the first night yu ran... and plus you had your engine bay open so i had a peak..
08-11-2008, 10:21 PM
mr_vtec

Hahah guys
i finally meet the owner today very nice guy.!!

Just a heads up!! We will see a really really low 12s pass from this car very soon..:)

good luck dam..
08-11-2008, 11:26 PM
EG5

Quote:

Originally Posted by mr_vtec

Hahah guys
i finally meet the owner today very nice guy.!!

Just a heads up!! We will see a really really low 12s pass from this car very soon..:)

good luck dam..

low 12s should be doable :thumbsup:
09-11-2008, 12:18 AM
Q_ball

Well done on a fantastic pb and 60ft... most impressive!!
09-11-2008, 08:32 AM
fatboyz39

k24 setup?
09-11-2008, 08:36 AM
EG5

Quote:

Originally Posted by fatboyz39

k24 setup?

nah
He will try full slicks
28-01-2009, 10:30 PM
YBOOST

I finally got to run with full slicks tonight at WSID.

On my last run of the night i got a 12.77 @ 104mph with 1.87 sixty foot for a new PB!
I had launch control set at 5500rpm. My first few runs i couldnt get traction on take off so i took off with less rpm. As the night went on the car was gripping heaps better. Take off at almost full acceleration but still bogging down. Need to raise launch control and hopefully get a 1.7 sixty foot! 12.6 is the next target...
28-01-2009, 10:49 PM
mr_vtec

man i can tell you all they need is a bigggggggggggggggggggggggggggggggg burn out and they will get you 1.714 60ft like i did with out traction bars or nuffin..

good luck next outing..
28-01-2009, 11:25 PM
EG5

Quote:

Originally Posted by YBOOST

I finally got to run with full slicks tonight at WSID.

On my last run of the night i got a 12.77 @ 104mph with 1.87 sixty foot for a new PB!
I had launch control set at 5500rpm. My first few runs i couldnt get traction on take off so i took off with less rpm. As the night went on the car was gripping heaps better. Take off at almost full acceleration but still bogging down. Need to raise launch control and hopefully get a 1.7 sixty foot! 12.6 is the next target...

Good to see you again Damo
More RPM off the line for sure.
Congrats on NEW PB !
28-01-2009, 11:57 PM
Benson

Congrats on pb

how come you lost so much mph?
29-01-2009, 11:38 AM
BADHBT

Congrats Damo,
1.6 60ft is doable :)
29-01-2009, 03:13 PM
YBOOST

Quote:

Originally Posted by Benson

Congrats on pb

how come you lost so much mph?

thanks mate.

i think when you launch well with slicks you lose mph but get better ETs. i think if you spin off the line you get a higher rpm.
29-01-2009, 03:15 PM
EG5

Pulse Racing Tuned FTW!
29-01-2009, 05:16 PM
beeza

Quote:

Originally Posted by YBOOST

I finally got to run with full slicks tonight at WSID.

On my last run of the night i got a 12.77 @ 104mph with 1.87 sixty foot for a new PB!
I had launch control set at 5500rpm. My first few runs i couldnt get traction on take off so i took off with less rpm. As the night went on the car was gripping heaps better. Take off at almost full acceleration but still bogging down. Need to raise launch control and hopefully get a 1.7 sixty foot! 12.6 is the next target...

Great times!

Why do you think the car is bogging?
29-01-2009, 05:24 PM
mr_vtec

not enough revs from the sounds of things..
29-01-2009, 05:36 PM
grumpy rooster

Any car will run less mph when it gets a better 60ft. Its just the way it works.

Well done on the time and nice to meet you. More revs everywhere and mid 12's will be your friend. :)
29-01-2009, 06:28 PM
YBOOST

yeah needs more revs on launch control.

good meetin you grumpy!
29-01-2009, 06:37 PM
jdmlvn

very impressive, any pics of ur car on the strip?
29-01-2009, 07:01 PM
beeza

Quote:

Originally Posted by YBOOST

yeah needs more revs on launch control.

good meetin you grumpy!

Gotcha :thumbsup:
30-01-2009, 11:17 AM
YBOOST

this is the 12.77 run
http://www.youtube.com/watch?v=WLPTM5wZvDg
30-01-2009, 12:43 PM
zco

sounds like a bit of bogging at the start

whats launch control sitting on ? and psi in the tyres ??
30-01-2009, 12:44 PM
EG5

Quote:

Originally Posted by zco

sounds like a bit of bogging at the start

whats launch control sitting on ? and psi in the tyres ??

5500 rpm
around 11 - 12 psi on the slicks
30-01-2009, 01:28 PM
rayb3na_

slicks fitted to like itr rims? or 13inch welds?
30-01-2009, 03:01 PM
EG5

Quote:

Originally Posted by rayb3na_

slicks fitted to like itr rims? or 13inch welds?

stock itr 15 inch with slicks
30-01-2009, 03:15 PM
beeza

Very Nice!
30-01-2009, 06:48 PM
DR HONDA

Well done good for 12.5:thumbsup:. Will be quickest DC2R N/A soon.
30-01-2009, 08:43 PM
YBOOST

Quote:

Originally Posted by DR HONDA

Well done good for 12.5:thumbsup:. Will be quickest DC2R N/A soon.

whats the quickest time?
30-01-2009, 09:54 PM
EG5

Quote:

Originally Posted by YBOOST

whats the quickest time?

12.7
BADHBT dc2
30-01-2009, 10:15 PM
jdmlvn

Quote:

Originally Posted by EG5

12.7
BADHBT dc2

does badhbt even exist anymore?
31-01-2009, 04:23 AM
Limbo

yeah but its not NA anymore
05-02-2009, 08:00 PM
BADHBT

Quote:

Originally Posted by Limbo

yeah but its not NA anymore

says who?

damo 12.5 you can do it i had that feeling that my next run would be a 12.5 but then broke a shaft.. so i packed up and left never been back

you can do it!
06-02-2009, 09:11 AM
barefootbonzai

Quote:

Originally Posted by BADHBT

says who?

what would you know. :wave:
07-02-2009, 03:00 PM
YBOOST

Quote:

Originally Posted by BADHBT

says who?

damo 12.5 you can do it i had that feeling that my next run would be a 12.5 but then broke a shaft.. so i packed up and left never been back

you can do it!

Ive been thinking about taking off launch control, i reckon i can get a better 60 foot but just gotta find that perfect RPM. then hopefully 12.5s
07-02-2009, 03:42 PM
SPL_K

nice times damo...! when are you gonna bring your car down to wakefield? :D
08-02-2009, 07:49 PM
fatboyz39

Nice work. Very fast.
09-02-2009, 09:50 AM
mr180sx

Quote:

Originally Posted by BADHBT

says who?

damo 12.5 you can do it i had that feeling that my next run would be a 12.5 but then broke a shaft.. so i packed up and left never been back

you can do it!

Hurry up and get your car back on the road Marc;):thumbsup:

All times are GMT +10. The time now is 03:10 AM.

All logos and trademarks in this site are the property of their respective owner(s). The comments are the property of their posters.