lostie B20 Build/Dyno

Printable View

28-10-2008, 03:13 PM
replenished.soul

lostie B20 Build/Dyno

B20Vtec first NA build

Motor Specs
Bottom End
B20B8 Bottom End
Freshly built
New rings
New bearings
ARP rod Bolts
Professionally Notched Pistons
Fresh Hone
New Clearances
Built by Dave

Head
Stock VTI-R
2000 ITR CAMS

Bolt-ons
Skunk2 Intake Manifold
Skunk2 70mm Throttle Body
Small Tube Tri-Y Headers
SRI Intake with Blox Air Filter
2.5inch System built by Performance Exhaust (High flow

Crome ECU Tuned by Dave @ Insight Motorsport

Dyno Figures 132kw @ At the wheels
Rev Cut out 8200rpm

http://i386.photobucket.com/albums/o...0-29-35715.jpg
28-10-2008, 03:24 PM
vinnY

awesome stuff there, good work

waiting for ron to chime in and see what he could have done by upgrading the block instead of the head hah
28-10-2008, 03:27 PM
VTec1987

using stock pistons?
28-10-2008, 03:28 PM
chauster

My friend has the same engine in a EG
He only pulled 126kw? 2' exhaust though.
Dunno about other mods.
28-10-2008, 03:36 PM
replenished.soul

yeah they are stock pistons
28-10-2008, 03:38 PM
replenished.soul

Quote:

Originally Posted by chauster

My friend has the same engine in a EG
He only pulled 126kw? 2' exhaust though.
Dunno about other mods.

thats pretty good.. b4 the tune i made 128kw
28-10-2008, 03:40 PM
chauster

126kw was after the tune lol

vtak so loud =/
28-10-2008, 04:12 PM
tegy_boi

what great power {=p ~
28-10-2008, 05:17 PM
Benson

Goes to show with the right combo & advice a B20 can make over 130kw. For a stock OEM B20 bottom end, thats a very good result..

Another successful V1 B20 build

Good Work Lostie!
28-10-2008, 05:20 PM
[ricer]

nice numbers
heard alot about this car!
28-10-2008, 05:55 PM
fatboyz39

Quote:

Originally Posted by vinnY

waiting for ron to chime in and see what he could have done by upgrading the block instead of the head hah

LOL good one.

Goodwork LOSTIE!:thumbsup:
28-10-2008, 07:20 PM
replenished.soul

thanks guys b20 FTW!
28-10-2008, 07:24 PM
replenished.soul

Quote:

Originally Posted by Benson

Goes to show with the right combo & advice a B20 can make over 130kw. For a stock OEM B20 bottom end, thats a very good result..

Another successful V1 B20 build

Good Work Lostie!

you mean more like good work benny! lolz
28-10-2008, 11:17 PM
delsol9000rpms

nice build... you gonnA be taking it down the 1/4 mile anytime soon?
29-10-2008, 08:10 AM
Slaz

Nice little build, whay tri-y's did you use?
29-10-2008, 08:22 AM
replenished.soul

Quote:

Originally Posted by delsol9000rpms

nice build... you gonnA be taking it down the 1/4 mile anytime soon?

yeah maybe somtime after when i have proper susspension and tyres setup
29-10-2008, 08:24 AM
replenished.soul

Quote:

Originally Posted by Slaz

Nice little build, whay tri-y's did you use?

the replica tri y headers small tube, does the job still
29-10-2008, 08:26 AM
SHOGUNOVDDRK

w-o-w
29-10-2008, 12:11 PM
94dc2tegz

great stuff to see:thumbsup:
29-10-2008, 03:33 PM
beeza

Awesome work mate!
29-10-2008, 08:20 PM
Slaz

Just wondered if you went big or small tube given engine size.

Like i said, very nice build. Well done. :thumbsup:
29-10-2008, 08:22 PM
myztery

well done bro, let me know when you go to the drags, ill bring mine around
29-10-2008, 08:35 PM
fatboyz39

1/4 mile next week LOSTIE!
29-10-2008, 08:38 PM
myztery

fat boyz are you taking yours
29-10-2008, 08:39 PM
myztery

1/4

Quote:

Originally Posted by fatboyz39

1/4 mile next week LOSTIE!

are you taking yourz
29-10-2008, 08:54 PM
fatboyz39

Quote:

Originally Posted by myztery

are you taking yourz

No idea yet.
29-10-2008, 09:08 PM
myztery

Quote:

Originally Posted by fatboyz39

No idea yet.

we should get some people together and go to the runs...
29-10-2008, 10:09 PM
B20NA

good result, the B20's can produce power even stock bottom end.
Great work
29-10-2008, 10:39 PM
replenished.soul

Quote:

Originally Posted by fatboyz39

1/4 mile next week LOSTIE!

man i wouldnt mind aye betya ill be wheel spinng hard out man prolli do a high 16s lolz well see how it goes ayes
30-10-2008, 08:00 AM
bighaks

im in if you guys decide to go
30-10-2008, 09:40 AM
Benson

i might head out next week. You can race my snail Kswap
30-10-2008, 11:40 AM
[ricer]

Quote:

Originally Posted by Benson

You can race my snail Kswap

woah turbo kswap!!! lol
30-10-2008, 12:28 PM
myztery

Quote:

Originally Posted by Benson

i might head out next week. You can race my snail Kswap

Quote:

Originally Posted by bighaks

im in if you guys decide to go

count me in if you head down there
30-10-2008, 02:22 PM
xntrik

this car was fcking fast. LOL
31-10-2008, 08:05 PM
STOCK

Driven this machine, impressive power band for a basic N/A build, see you at the runs next week ed
01-11-2008, 11:45 AM
est1989

performance exhaust woo!!
good shit!
02-11-2008, 09:31 PM
phwoaaa

nicenice .. mines only pulling 125 =(

do u know if thers much diffs if i changed to a 2.5" catback... iv only got a 2" catback atm with 2.5" headers...
03-11-2008, 01:15 PM
delsol9000rpms

ye a bigger exhaust would benifit your car definately
03-11-2008, 01:18 PM
dsp26

very nice!! i wanna see that powerband in the flesh!!!

come guys come:
http://www.ozhonda.com/forum/showthread.php?p=1969972
03-11-2008, 03:04 PM
tegy_boi

MAN.. this car will munch my stock 180 =oD
05-11-2008, 07:03 PM
STOCK

Quote:

Originally Posted by tegy_boi

MAN.. this car will munch my stock 180 =oD

Dont be shy trung add more boost :thumbsup:
05-11-2008, 07:50 PM
replenished.soul

Quote:

Originally Posted by tegy_boi

MAN.. this car will munch my stock 180 =oD

man your 180 is a road weopon of mass distraction lolz like kevin said boost it up and ill have no chance lolz fark missed out on eatern creek today
06-11-2008, 09:59 PM
myztery

hey lostie when can i run that beast of yours, after all, it was you that started my hunger for honda...woolies reppin...lol...
07-11-2008, 04:49 PM
replenished.soul

Quote:

Originally Posted by myztery

hey lostie when can i run that beast of yours, after all, it was you that started my hunger for honda...woolies reppin...lol...

Yo Rob u can run me one day if ya see me lolz but no street hooning for me lolz u no my past experience lolz catcha up rob the fob lolz
08-11-2008, 08:26 PM
drated

Hey mate, this is a noob question but what sorta things do you need to do for the b20 upgrade ? like did you need a bigger fuel pump or a new ecu etc. Like i have a civic ek vtir and one day might put in a b20 bottom end and was wondering what will i need to get it working properly not so much performance yet like full cam setup and wot not just the bottom end.
10-11-2008, 07:51 AM
Benson

Quote:

Originally Posted by drated

Hey mate, this is a noob question but what sorta things do you need to do for the b20 upgrade ? like did you need a bigger fuel pump or a new ecu etc. Like i have a civic ek vtir and one day might put in a b20 bottom end and was wondering what will i need to get it working properly not so much performance yet like full cam setup and wot not just the bottom end.

All you need is a B20 bottom end, B18c headers, Aftermarket ECU(Crome) with good base map) and that should be enough to get you rolling.

Stock fuel pump is fine.
17-11-2008, 09:53 PM
VTec1987

wat ecu did u use before getting it tune?
128kw atw, that's heaps good
18-11-2008, 01:02 PM
Benson

Crome ECU
19-11-2008, 07:03 PM
phwoaaa

dont forget the golden eagle vtec converter :D
ull need that .. hehe
31-12-2008, 10:04 AM
kraiye

how much does a B20 bottom end go for?
05-01-2009, 07:12 PM
V73C

Benson, whats the differences between V1 setup to a V3 ???
05-01-2009, 07:47 PM
Benson

We classify the engine base on the performance level of each of the bottom ends. Through the years of researching different combo's with the B20 bottom end, there are 3 different combo's which has been very successful in each performance build.

If your interested, send me a pm for further details
06-01-2009, 11:10 AM
xtercii

b-series is the shit!!
08-01-2009, 12:33 AM
jdmTYPE R

Quote:

Originally Posted by xtercii

b-series is the shit!!

u mean b18????
18-02-2009, 08:56 AM
turtle187

who did this conversion for u?
i want one too

All times are GMT +10. The time now is 02:32 PM.

All logos and trademarks in this site are the property of their respective owner(s). The comments are the property of their posters.