Printable View
I am looking to drop accord 08 as the gap is really bugging me after getting new wheels. I dont want to sacrifice that much comfort but I want a noticable drop of more than 1 inch. I am a newb when it comes to suspension.
Wondering if someone could help me in the parts i need to buy that are most suitable for this model and what im after. Also is there a good store to go to, or best to buy online?
thanx so much!
Mike
i posted the same thread last week. Not many ppl have the new accords and u cant get much info for this car on here. But there are d2 coilovers for the new accord. I got quoted 1450 landed in Syd
both king spring and eibach are available at this moment....
Quote:
Originally Posted by Zimp13
Thanx, I spoke to some people and was quoted King spring at 450 and 750 for eibach pro kit installed. The problem is I have quite a large gap..do you think eibach will be enough. My gap from top of tyre to well is 3.5 inch in rear and 2.75 in front!
Or should I get D2 coil over ? How much of a drop can it give you and where can you get it?
Thanx
Advice is reliable from Daniel at APEX (Honda Specialists) www.apexautoworks.com.au or 02-47511555
mine is a 2.4litre....Quote:
Originally Posted by Rudy
for pro-kit it only lowers by 1.2" for the front and 1" for the rear..... i dun think this is low enuf....
for sportline-kit it lowers by 1.5" for the front and 1.4" for the rear.... this is the one that i would go for....
as for king springs, i was advised it would lower the car by around 1.5" both front and rear...
i have measured my car and if both front and rear are dropped by 1.5" the gap would be just nice.... probably around two fingers gap between the tyres and the guards... plus when the car is on the road, the gap should drop by another half an inch.....
currently the rims on my car are the oem 17"...... i m postponing to lower the car atm cos i might get another car pretty soon and if i do get another one then i wont touch the accord.....
also bare in mind that if you are after a drop more than 2" it'sQuote:
Originally Posted by Rudy
recommended that you change your shocks as well.
i drive an 07 accord with the sportline kit...works a treat and the
drop i quite nice...was once a 4WD.
nice drop! but I will go for coilover if I decide to low the car, for reliable.
YEh agree..even if I get a nice drop with the eibach id still need to soon replace shocks if the drop is big enough and there are no aftermarket ones yet. So am going to order coil over. Thanx for the advice! Btw, Dyljoy you car looks amazing but why selling so soon?Quote:
Originally Posted by dyljoy
thx for your comment, sell due to get fund for my first house, it is painful decision to make. but i still stick with honda for sure, new jazz is my another car.
damn! that indeed is a very nice drop.
you might want to wait a while see if there are other
reliable brands such as teins etc... for the coilovers
im pretty sure te new accord (euro) has the same suspension as the older CL9.
That means all springs , shocks and coilover systems will fit it.
looks really good.... hm.... i dunno but i still think that car is dropped more than a mere 1"...... even with the 19".....Quote:
Originally Posted by Rudy
Quote:
Originally Posted by bennjamin
really???? any way u can help, at least me, to confirm this??? thank u........:thumbsup::thumbsup::thumbsup:
D2 Coilovers have arrived from Taiwan.. will be installing them on the accord on the Saturday..
i cannot confirm - all i can say is the older euro and current euro are almost the same on the outside and inside. Can some one confirm ?Quote:
Originally Posted by Zimp13
double wish bone front and multi link rear ?
how much is cost in total? and show us some pic when the install done:thumbsup:
Quote:
Originally Posted by doosra
it cost $1350.. delivered..
oh, nice price. can't wait to see the result after set up
u got any plans to drop urs....?
no, no anymore. coz i plan to selling my car to funding my first house, sad to make it happen.
that's a shame.. cause u only recently purchased it and spent money modding it..
gluck with the sale!
ya, maybe part it out, but it seems not many ppl interest and also coz not many ppl own new accord, sad.
is the new V6 accord also same suspension as CL9? how about the exhaust and intake? wheels offset and studs pattern?
i think the suspension may not be the same as CL9. exhaust and intake as well. about the wheel, original one is 114.3x5, 17x7.5
So went with Ksport coilovers. Done on Fri. 3+ in drop. Am satisfied with the choice. Springs would not have been enough.
BEFORE:
http://i240.photobucket.com/albums/f...pie/before.jpg
http://i240.photobucket.com/albums/f...ie/before2.jpg
AFTER:
http://i240.photobucket.com/albums/f...frontwheel.jpg
http://i240.photobucket.com/albums/f...e/DSC00481.jpg
http://i240.photobucket.com/albums/f...ie/front2c.jpg
very nice mate... that looks sweet.. i went with D2's..
how much did the ksport cost you.. ?
Thanx! Set me back about 1600 AU shipped. Nice deal on the D2! Any pics yet?Quote:
Originally Posted by doosra
haven't bothered to take pics yet.. they're on the missus car.. it's not lowered that much though cause she's a crap driver... : )
what size wheels you got on there.. ?
HAHa tru that. They are 19 x 8 on there. Am going to try to get alignment done this week. Do you think the tuck is too much? Its grown on me and i like it but worried about possibly camber issues. No kit out yet!
hi Rudy, saw u r using Sumitomo tyres. r they good on dry n wet? sourcing a set atm....
nice.. i think the car is sitting at a perfect height.. i'm just curious whether you would need a camber kit or if there are kits out there for the accord as I know with the CL9 euro, that if you go too low, you'll need a camber kit..Quote:
Originally Posted by Rudy
Id definitely recommend them (sumi Z3 only). Grip is very good. Wet slightly less than dry though. You wont be disappointed thats for sure. And the value for money is very hard to beat. Some tests (tirerack.com) even ranked them #1 against toyo, potenza, etc.Quote:
Originally Posted by AusAccord
Are you only looking at sumis? Falken 452 is another good choice. Supposed to be very superior wet and dry grip.
Tks Rudy thats what i heard for Z3. i think falken is cost much than sumis but will keep an eye on both. tks again :thumbsup:Quote:
Originally Posted by Rudy
Damn IF anyone knows of a rear camber kit that would be compatable with this Id be so happy. All i know is that someone told me it needs a rod and that could be similar to 7th accord, VW , s2k, but length is the issue.
can u ask the work shop to make a custom one for you?