Red H badge help pls

I bought this badge from the dealer (DC5R Rear red H badge 75700-S5T-E11) to replace the back 1 on my Accord (CL9).This was supposed to be a direct replacement.
Now when i compared it to my existing one, it doesnt look like its gonna fit.
http://img261.imageshack.us/img261/2...torearhfh3.jpg
http://img261.imageshack.us/img261/r...jpg/1/w640.png

Then I went to the front to do the same comparison and
http://img183.imageshack.us/img183/5...ofronthko8.jpg
http://img183.imageshack.us/img183/r...jpg/1/w640.png
It seems like it will fit there.

Then i put the badge over the existing one and it seems to be a perfect fit
http://img129.imageshack.us/img129/5...rfronthln3.jpg
http://img129.imageshack.us/img129/r...jpg/1/w640.png

Now my question is how do i remove the front H ?
And does anyone know what the part number is for the Red-H badge from the Accord Euro-r (CL7), I reckon this will be a direct replacement for my rear badge.?

The CL7s don't come with a red badge, to remove the front badge you have to cut off the 2 pins behind the original badge, taking the grill out to do this might be easier, you may be able to reuse the 2 washers that holds the 2 pins from the old badge. For the rear, I have no idea, you need to check the spacing of the pins from your red badge to see if they match the holes on the boot, otherwise lets hope EUR003act replies to this thread since he's done this conversion ;)

Thanks so much buddy, gonna try it this weekend, hope its gonna fit before i cut those pins, I reckon i will try to remove the grill to do this......
EUROO3act where are you? help pls wrt rear badge.

I think the spare parts guy gave you the wrong badge.As far as i know the part no. for the DC5R rear badge is 75700-S5T-E11.

Tony, its definitely the correct part and part number, I can take a pic of the packaging with the part number on it if you want?

I got the part numbers off one of the threads here, below is an insert of it.
EuroR Conversion Parts

03-05 EuroR front grille 71122-SEA-901ZJ*
03-05 bonnet trim (replaces chrome) 75120-SEA-R01ZE*
CL7 front grille EuroR emblem 75732-SEA-R01
EuroR radiator bulkhead cover 71123-SEA-901
Rear EuroR badge 75731-SEA-R01
EP3R Front red H badge 75700-S9A-600
DC5R Rear red H badge 75700-S5T-E11
FN2R remote control red H backing 35114-S6M-Q11
CL7 EuroR intake manifold 17100-RBC-J00
CL7 EuroR intake manifold cover 17121-RRB-A00
CL7 EuroR rocker cover 12310-PRC-505
DC5R red engraved gearknob 54102-S6M-R00

Quote:

---

Originally Posted by Aslam

Tony, its definitely the correct part and part number, I can take a pic of the packaging with the part number on it if you want?

I got the part numbers off one of the threads here, below is an insert of it.
EuroR Conversion Parts

03-05 EuroR front grille 71122-SEA-901ZJ*
03-05 bonnet trim (replaces chrome) 75120-SEA-R01ZE*
CL7 front grille EuroR emblem 75732-SEA-R01
EuroR radiator bulkhead cover 71123-SEA-901
Rear EuroR badge 75731-SEA-R01
EP3R Front red H badge 75700-S9A-600
DC5R Rear red H badge 75700-S5T-E11
FN2R remote control red H backing 35114-S6M-Q11
CL7 EuroR intake manifold 17100-RBC-J00
CL7 EuroR intake manifold cover 17121-RRB-A00
CL7 EuroR rocker cover 12310-PRC-505
DC5R red engraved gearknob 54102-S6M-R00

---

Then euro03act(Justin)may have got the front and rear badge part nos. back to front.:confused:.Just order the other part no. and you should be right!

Quote:

---

Originally Posted by Aslam

Thanks so much buddy, gonna try it this weekend, hope its gonna fit before i cut those pins, I reckon i will try to remove the grill to do this......
EUROO3act where are you? help pls wrt rear badge.

---

Quote:

---

Originally Posted by tony1234

Then euro03act(Justin)may have got the front and rear badge part nos. back to front.:confused:.Just order the other part no. and you should be right!

---

lol hey! i found the thread...

yeah that badge you have is the EP3 front badge, not the DC5 rear badge...

ok so ive found the correct part numbers:

EP3 Front Red H badge - 75700-S5T-E11
DC5 Rear Red H badge - 75701-S6M-Z01
CL9 Front H badge - 75700-S9A-G00

i mustve got the stock front badge and DC5 badge packaging mixed up :(

sorry buddy! i have now corrected my original post... as for the dealer, im suprised he didnt question it when you asked for a rear badge and it came up with a front badge?

Thanks so much EUR003act, So i got the wrong rear badge but I gained a front one which is going to be a direct fit?
I am going to order that rear badge (DC5 Rear Red H badge - 75701-S6M-Z01) on monday.
Thanks buddy

Guys, I originally thought the front badge was gonna be very expensive, and we were convinced that the rear badge code was correct....Aslam paid 260ZAR for it (ordered from Europe via local Honda dealer)...roughly 40AUD....:wave:

Sounds like a sweet deal, cos I was interested...I must just wait for his install pics b4 ordering mine:wave::cool:

Quote:

---

Originally Posted by Aslam

Thanks so much EUR003act, So i got the wrong rear badge but I gained a front one which is going to be a direct fit?
I am going to order that rear badge (DC5 Rear Red H badge - 75701-S6M-Z01) on monday.
Thanks buddy

---

Quote:

---

Originally Posted by Quest

Guys, I originally thought the front badge was gonna be very expensive, and we were convinced that the rear badge code was correct....Aslam paid 260ZAR for it (ordered from Europe via local Honda dealer)...roughly 40AUD....:wave:

Sounds like a sweet deal, cos I was interested...I must just wait for his install pics b4 ordering mine:wave::cool:

---

no probs buddy!

yeah i think my front badge was about AUD$50... rear about AUD$40.... :thumbsup:

Appreciate the help guys, i came right ;)

http://img404.imageshack.us/img404/9...2008066lq4.jpg
http://img404.imageshack.us/img404/0...jpg/1/w640.png

Now to order the correct rear one.:thumbsup:

Quote:

---

Originally Posted by Aslam

Appreciate the help guys, i came right ;)

http://img404.imageshack.us/img404/9...2008066lq4.jpg
http://img404.imageshack.us/img404/0...jpg/1/w640.png

Now to order the correct rear one.:thumbsup:

---

Gr8....email me any install pics or if you had any hassles

Nice.I might change my badges too.

anyone know how to remove the rear honda badge?

Quote:

---

Originally Posted by K24A

anyone know how to remove the rear honda badge?

---

with some fishing line.

I can see you got the bonnet trim code..

75120-SEA-R01ZE*

what should i order to replace the chrome one with the colour Graphic gray?

I have an 03 euro

Cheers

Quote:

---

Originally Posted by Aslam

Tony, its definitely the correct part and part number, I can take a pic of the packaging with the part number on it if you want?

I got the part numbers off one of the threads here, below is an insert of it.
EuroR Conversion Parts

03-05 EuroR front grille 71122-SEA-901ZJ*
03-05 bonnet trim (replaces chrome) 75120-SEA-R01ZE*
CL7 front grille EuroR emblem 75732-SEA-R01
EuroR radiator bulkhead cover 71123-SEA-901
Rear EuroR badge 75731-SEA-R01
EP3R Front red H badge 75700-S9A-600
DC5R Rear red H badge 75700-S5T-E11
FN2R remote control red H backing 35114-S6M-Q11
CL7 EuroR intake manifold 17100-RBC-J00
CL7 EuroR intake manifold cover 17121-RRB-A00
CL7 EuroR rocker cover 12310-PRC-505
DC5R red engraved gearknob 54102-S6M-R00

---

oopps being a noob think i found it..

http://www.ozhonda.com/forum/showthr...o+part+numbers


i think i should order 75120-SEA-R01ZG for graphite gray .....

Quote:

---

Originally Posted by K24A

anyone know how to remove the rear honda badge?

---

Dental floss will reduce paint damage....

Get some dental floss (any flavour), and run behind the top of the badge only...(its only the thin double sided top tape that holds badge down)..then it just pulls out (no clips to hold badge down).....then you remove the white plastic lugs....then insert new badge which snaps into place:wave:

Here's some pics on my install

http://i215.photobucket.com/albums/c...t227/backH.jpg

http://i215.photobucket.com/albums/c...7/backHcar.jpg

http://i215.photobucket.com/albums/c...27/RedHOEM.jpg

With the snaps on the back of the new badge, cause the badge to be slightly higher...notice the previous position below badge...polished it out eventually

http://i215.photobucket.com/albums/c...27/smaller.jpg

Quote:

---

Originally Posted by EUR003act

lol hey! i found the thread...

yeah that badge you have is the EP3 front badge, not the DC5 rear badge...

ok so ive found the correct part numbers:

EP3 Front Red H badge - 75700-S5T-E11
DC5 Rear Red H badge - 75701-S6M-Z01
CL9 Front H badge - 75700-S9A-G00

i mustve got the stock front badge and DC5 badge packaging mixed up :(

sorry buddy! i have now corrected my original post... as for the dealer, im suprised he didnt question it when you asked for a rear badge and it came up with a front badge?

---

Hey there the CL9 Front H Badge (75700-S9A-G00) you have listed there is just the original OEM part isn't it? It's not a red badge is it.

I'm still trying to decide whether to do my Graphite Euro or not. It's not a high priority and I keep putting it off as the badhes aren't cheap and I'm unsure about the red against the Graphite Pearl.

Quote:

---

Originally Posted by Mike Star

Hey there the CL9 Front H Badge (75700-S9A-G00) you have listed there is just the original OEM part isn't it? It's not a red badge is it.

I'm still trying to decide whether to do my Graphite Euro or not. It's not a high priority and I keep putting it off as the badhes aren't cheap and I'm unsure about the red against the Graphite Pearl.

---

yeah the one that says CL9 front badge, thats just the plain silver CL9 front badge.. :thumbsup:

Quote:

---

Originally Posted by Mike Star

Hey there the CL9 Front H Badge (75700-S9A-G00) you have listed there is just the original OEM part isn't it? It's not a red badge is it.

I'm still trying to decide whether to do my Graphite Euro or not. It's not a high priority and I keep putting it off as the badhes aren't cheap and I'm unsure about the red against the Graphite Pearl.

---

Get the badges Mike they'll look good on your graphite Euro.They cost approx.$150 for both from Honda spares.The front one looks a bit big at first but you get used to it.

Quote:

---

Originally Posted by tony1234

Get the badges Mike they'll look good on your graphite Euro.They cost approx.$150 for both from Honda spares.The front one looks a bit big at first but you get used to it.

---

Thanks Tony,
I'll probably bite the bullet and get them. I'll see the next time I have a spare $150 and call my Honda guy and order them.
Cheers

Quote:

---

Originally Posted by Aslam

Tony, its definitely the correct part and part number, I can take a pic of the packaging with the part number on it if you want?

I got the part numbers off one of the threads here, below is an insert of it.
EuroR Conversion Parts

03-05 EuroR front grille 71122-SEA-901ZJ*
03-05 bonnet trim (replaces chrome) 75120-SEA-R01ZE*
CL7 front grille EuroR emblem 75732-SEA-R01
EuroR radiator bulkhead cover 71123-SEA-901
Rear EuroR badge 75731-SEA-R01
EP3R Front red H badge 75700-S9A-600
DC5R Rear red H badge 75700-S5T-E11
FN2R remote control red H backing 35114-S6M-Q11
CL7 EuroR intake manifold 17100-RBC-J00
CL7 EuroR intake manifold cover 17121-RRB-A00
CL7 EuroR rocker cover 12310-PRC-505
DC5R red engraved gearknob 54102-S6M-R00

---

Where'd you get these parts numbers from? Could you get the part number for the EuroR intake arm?

Quote:

---

Originally Posted by integral90

Where'd you get these parts numbers from? Could you get the part number for the EuroR intake arm?

---

lol i got those part numbers... theyre all parts i purchased... i can try find the part number for it... im guessing yo want it for the RBC intake?

ive got an aftermarket CAI for the RBC if you want that as well :thumbsup:

Quote:

---

Originally Posted by EUR003act

lol i got those part numbers... theyre all parts i purchased... i can try find the part number for it... im guessing yo want it for the RBC intake?

ive got an aftermarket CAI for the RBC if you want that as well :thumbsup:

---

Oh whoops lol. If you could find the intake pipe number for me that would be great.

PM me about this CAI, is it custom or made by a company? :wave:

which red honda emblem badge should I look for my 2009 cu2?

would the ones on the current civic sedan type r in japan fit?

Quote:

---

Originally Posted by EUR003act

no probs buddy!

yeah i think my front badge was about AUD$50... rear about AUD$40.... :thumbsup:

---

Damn!!
Every time I see someone write in about this I mean to do the Red Badge thing to my Graphite Pearl MY06 Euro Lux. Tony has also told me to do it and I just never get around to it. Now I will for sure.

Would the part Nos you have now listed be the same for a MY06 Euro Lux?

Thanks heaps!

Quote:

---

Originally Posted by Mike Star

Damn!!
Every time I see someone write in about this I mean to do the Red Badge thing to my Graphite Pearl MY06 Euro Lux. Tony has also told me to do it and I just never get around to it. Now I will for sure.

Would the part Nos you have now listed be the same for a MY06 Euro Lux?

Thanks heaps!

---

yes will fit good...

im selling both of mine... get in quick if you want them

Quote:

---

Originally Posted by EUR003act

yes will fit good...

im selling both of mine... get in quick if you want them

---

PM sent!