Printable View
Hey guys, one of the first things i'd like to do, is replace my air intake system.
i've had a search, even went to how stuff works, but couldn't find anything explaining the parts of an air intake system...
if i was to replace this system do i need to replace the entire pipe, as well as filter? or can i get away with just replacing the filter?
further, is there much point replaicng the air intake anyway? is there any notable difference, in engine power?
cheers, james
Try searching here in the civic section, using "CAI*"
you jsut change your panel filter to a k and n one thats menas you wouldnt have to chaneg the pipe... but if you wanted a bit more power and better power than go for CAI or SRI. bigger pipes better intake thats menas you would hav to chaneg the whole pipe
just remove the airbox and leave the rest of the oem piping, get hold of some 3inch piping and slap the pod on one side and stick the other side into the existing piping.
increasing the amount of air flow by reducing restrictions is the goal. by having more air get into the engine more power is produced and a greater throttle response is achieved.
cheers, so i think i might do what g.ta said.. sounds relatively simple ahahah
so, is that tachnically a 'short ram intake'? or is is just considered normal?
ill probably get started on this soon. :)
a) what car ?
b) SRI recommended as replacement it is daily driver as CAI reduces torque curve....
c) whats ur budget?
that would be considered as "normal"..Quote:
Originally Posted by sarantosser
a SRI would normally have all the piping replaced and the pod routed near or behind the battery or as far away as possible whilst whilst still being housed in the engine bay.
dny boy - its a ek1 honda civic 1996, andi have a relatively low budget - around $200 maximum.. (poor)
and about the torque is it desirable to reduce the curve or no?
in any case, are the all similar priced? is it worth me going a CAI or SRI or even jsut a filter change depending on how much my money can get me?
cheers
well a CAI youll loose torque as the piping is longer therfore taking longer to get to the intake manifold , SRI for a good 1 wont be cheap i mean theres a few traders on here you might be able to get one off but just get a pod or raplacement panel filter make a lil difference.... =) keep saving get a good SRI
ok sweet man, ill replace the filter in the meantime.. how much money am i looking at for a decent SRI ? - placed my bets today on the cup, maybe i can buy one tomoz if im lucky ahaha
haha who u backing lol yea i mean 200 check out the trader section JDMyard has some good stuff ur running a d16y8 yea? theres a good k&n SRI that i got k&n 63-1017 top setup( from rocket inds) yea get a k&n panel replacement for the time being and then start shoping ur looking between 200 and 450 but its up to u on what u want and so forth .... google is ur best friend...actaully theres even the top fuel 1000 system SRI its not bad havent heard nythin bad bout em
you wont loose torque
dont make up shit
youll loose slight bottom end throttle response, but it will be barely noticeable
dont get a pod.
on a totally stock car they are pointless
get some plsatic flexi piping, run it from inside of the guard or the byumper bar up to the bottom of teh stock airbox, and feed it in there
replace stock filter with a high flow K&N item
cheap, effective, and not illegal like a pod
i was answering a question not making up i was going off facts ive experienced and read off othere sites with otheres asking about intakes if you feel you know it all why dont all the threads go to you then....i was only trying to help someone
Ive backed Mad Rush, Bauer and Septimus each for a win and place. hopefully i'll get something :p
I am pretty sure i've got a d16y8, so i'll get onto those k&n panel filters pretty soon. just another question - do i have to get these sort of filters from in internet, or are there retailers in melbourne i can get them from?
also, went and took a look uner the bonnet aha, and the air intake i have now seems to go all the way down to the front bumper collecting air from there.. thats pretty much standard right? so if ive got cool air in then id prefer to only change the panel filter.
cheers again :)
http://www.knfilters.com/search/prod...x?Prod=63-1017 yea i have this one i have the same motor too i kept the stock intake from behind the front bar but i ended up making a custom one which anded at teh whole in the engine bay ... keep that piece and replace jsut the intake until then u can get a replacemnt panle for now make some diff
did u win i lost hard
Lol cheers bro i aprreciate your help!
this is what i was thinkin of getting until i can scrape some proper money together..
http://www.knfilters.com/search/prod...x?Prod=33-2120
is that the right filter for my car? cheers
lol i bet 5 bucks on Bauer to place only, so ill get something stupid like 15 bucks back from 25 that a spent on other horses
haha i bet on stupid mad rush dumb horse! somethin is better than nuttin aye lol yep das sd filter auto barn n that should havem ...
ok i have purchased a k&n panel filter and am waiting its arrival...
a family friend advised me to cut the intake tube that i have so the hole is at the bottom of the car... is this ok to do?
obviously i'll take a look at my piping and shit before i cut anything, but yeah.
just want to make sure - cheers
EDIT: Ok i took a look and it seems that cutting piping would be a stupid idea cos it seems to be connected to somewhere under the bumper - so ill just stick with a k&n filter