hey,
just wondering can anyone give me some insight into mod paths for a DC2R or link me to a thread about this
it'd be much appreciated :)
i have searched this forum and cant seem to find any for DC2R, but have for DC5R's
Printable View
hey,
just wondering can anyone give me some insight into mod paths for a DC2R or link me to a thread about this
it'd be much appreciated :)
i have searched this forum and cant seem to find any for DC2R, but have for DC5R's
As usual do the basic mods first: Intake / Header / Exhaust
Ask EG5 (yonas) he'll hook you up =P
depends on your budget
this is pretty much the only way.
http://www.ozhonda.com/forum/showthread.php?t=101702
LOL :thumbsup:Quote:
Originally Posted by bungsai
good example of modding.
if you wanna mod go all out.
I reckon grab yourself a set of jdm 16" dc2R rims.
and as yonas said. I/H/E.
Grab a set of decent springs. drop it an extra inch. (spoon would probably be the best in this case)
Grab an ecu. Tune it.
Grab a couple of strut/chassis braces.
Tint the windows if havent already.
Get it detailed.
Simple start off =]
hmm my mates were telling me the same thing as EG5.
I/H/E first. what brands do you recommend guys?
buy coilovers.. dump it
den buy new rims.. Done!
clutch and flywheel first!!!
Sell the DC2R and buy...
http://www.seriouswheels.com/pics-20...e-1024x768.jpg
Thats one path lol =P
Paths to modification of your DC2R is difficult really cause out of the box its pretty well balanced :)
So depends on your hip pocket and your aspirations for your car will see what path you pick.
depends on budget.Quote:
Originally Posted by quangwoo
You can get JDM 4-1 headers if your low on budget, if not you can go with Toda or buddyclub.
As for catback it depends how loud you like it. You can go with buddyclub or spoon if you want a loud exhuast.
As for intake you cant go wrong with mugen or injen.
turb it! u cant go wrong with a simple turbo setup running 6-8 psi u will get alot more power than moding it n/a
really depends what u use the car for, what u want out of the car and how much u got to and want to spend,,,,,,,,,,,,,,,
I may have about $21~$22k to spend + including cost of buying the car. so i may have about 3-5k to spend modding around
lol, not after you fix up your $16k dc2r buddy
either way 3-5 k will get you a nice intake, exhaust, headers and coilovers.
Make sure you do it right the first time:
If I could do my car over, I would do:
Coilovers > Rear camber arms > Catback & Cat > Intake > Headers > Wheels and Tyres > ECU + 370cc injectors + bigger fuel pump (Then Tune)
Bracing makes a world of difference too:
Rear, front, floor, fender braces are all great.
If you are going to track, invest in:
* Oil cooler
* Larger radiator
* Lower temp thermostat / thermoswitch
All depends on your budget, and what you want to do with the car. I love music, so I have a big sound system too :D (sub comes out for trackwork though).