Printable View
I have a EM1 and i just tried to hook up some speakers in the front but i came accross this problem where the wires in the car have 4 wires (2 grey and 2 blue) but i dont know what i have to connect to wot. pic below. your help would be greatful. :)
http://i26.photobucket.com/albums/c1...PEAKERHELP.jpg
is the buttom pic the harness on the back of your head unit???
Quote:
Originally Posted by mars_panas
No sorry should have said its from the door.
im not sure but i think you can cut the adepter off and just re-wire it.... both (-) wire connect it to the single (-) one that is on your speakers and then use duck-tape... and do the same to the (+) ones...
but don't try it yet coz i am not sure myself...
Thanks Mars but can anyone confirm this??
Anyone?? i wanted to do this today.
come on someone has to know...... cos you all cant tell me your running stock speakers in your front doors???
Done. Close Thread.
hey lowek wat did you end up doing??
2 blue together and 2 grey together. grey is Neg and blue is pos. i just tried one of each first and it worked so i thought ide try the two and it still worked so problem solved. :)
can anyone explain y there is 2 of each ?
Quote:
Originally Posted by sammy342
The funny thing i found after doing it yesterday was it only had the 4 wires on the passanger side. and it was also part of the loom.
usually for the tweeterQuote:
Originally Posted by sammy342
Quote:
Originally Posted by mapdit
yeh but in my case it was only on one side being the passenger side door. and was also part of the std loom.