Printable View
Hey guys,
Trying to find an old thread I read on here ages ago, but I can't find it. My clutch pedal squeeks so badly, and it's annoying me. You can hear it from the inside and outside of the car. So I don't thinkkkk its the pedel itself.
Apparently its a common problem with the DC2s. The other thread I was talking about said that you need to lube/oil up something... but what was it?
Can anyone help?
Cheers.
What's a clutch pedel ?
you need spray grease
theres like a square rubber grommet at the front of the gear box with a slit in it... just put the straw attachment on and spray into that... just 1 or 2 squirts max should do it
Smart ass... it's late.Quote:
Originally Posted by tiksie
the squeek is from lack of lube on the release bearing and or pressure plate - when cold usually makes this SQUEEK noise. Either spray as suggested , or replace the bearing with a new one and a new layer of grease dabbed in the proper places.
Sweet thanks Benny! So where exactly do I spray, and what is the best product to use?
you remove the clutch slave cylinder (2 x 12mm headed bolts) , remove 2 x 10mm headed bolts on the clutch hardline bracket further back , pull back the slave cyl. carefully as to not damage the piston or the rubber boot.
Now you can pull off the rubber grommet , aim some grease (correct me which type...) into the gap and around and on the release fork - where it makes contact to the release bearing.
dont forget while the slave cylinder is off , peel back the rubberboot carefully and clean the piston. Apply some high temp general purpose grease in and around the piston too,then slide the boot back on.Should sit fine dont over fill the small boot
Thanks for the explanation. Will have to have a good look tomorrow. From what Ricer said... I thought he was talking about this... :
http://img19.imageshack.us/img19/413/img0680f.jpg
hey, i think we're facing the same problem. refer to this video that i recorded. is it the same sound we're refering to?
Video link: http://video.google.com.au/videoplay...26301813808611
but it only occurs after i bring the car for vtec session. not when cold like benjamin said. hmm...
it happened to one of my cars as well. the squeaking was really loud in and out the car on cold days. We just lubed it up and its all good now. where can you hear your squeak?
I just take off the rubber cover, get my can of silicon spray and spray it a bit, goes away :D
yea directly under your fan in that photoQuote:
Originally Posted by VTECMACHINE
the square shape rubber.. should be little slit in it at the front... or if not just peel it abit back and spray
That little rubber gromit comes off quite easily... So just pel that back and spray in there! Sounds easy enough... but how the eff do you get a can of spray stuff down there. haha.Quote:
Originally Posted by [ricer]
Also what was Ben talking about... seems like you guys are saying different things.
So should I spray the stuff into that little hole where the rubber grommit is? y/n?
Also, thanks for the help with the nooooby question guys!
yeah i just bought spray grease from supercheap in a blue can and it came with a red straw attachment... use that... should help you reach in there
You're a legend. Thanks champ!!Quote:
Originally Posted by [ricer]
My EG used to do this first thing in the morning when it was cold, after using the clutch for about 10 minutes used to go away!
Let us know if this fixes it up VTECMACHINE. My EG makes the noise too.
I'll try get around to it this weekend. Will let you know.Quote:
Originally Posted by Red_EG4
make sure not to spray too much
1 or 2 squirts max
what i did was just buy a new cylinder lol cheap anyways lol
Just want to make sure you understandQuote:
Originally Posted by VTECMACHINE
You take off the square thing, not the rubber gromit.
I think that when you say rubber gromit, your reffering to the thing i've crossed out.
If not, your all good.
http://i282.photobucket.com/albums/k...o/untitled.jpg
Man i'm way off. I actually need to go and have a look in the engine bay in some light.
same problem here . let us know how it goes. lol