Anyone good with photoshop???

Printable View

22-03-2009, 05:41 PM
E_Honda

Anyone good with photoshop???

Is anyone good with photoshop cause i'd like to see 18" Work SC1 Black polish wheels on my black euro. I've seen 19" on a black one just wanna see if 18" still looks good.

Here is the wheel don't think its 18" though.
http://www.wheelwarehouse.com/p-2337...ck-accent.aspx

Heres what i'm pretty sure is 19" unless someone can tell me otherwise, even if someone can photoshop this one to an approximate 18" size it would help:
http://i611.photobucket.com/albums/t...a/DSC01929.jpg
http://i611.photobucket.com/albums/t...a/DSC01881.jpg
http://i611.photobucket.com/albums/t...a/DSC01935.jpg
22-03-2009, 08:14 PM
denot

why need photoshop mate? ask .QD, he's selling one (dunno if he's still selling it or not though)

http://www.ozhonda.com/forum/showthr...light=Varianza
22-03-2009, 08:22 PM
E_Honda

Quote:

Originally Posted by denot

why need photoshop mate? ask .QD, he's selling one (dunno if he's still selling it or not though)

http://www.ozhonda.com/forum/showthr...light=Varianza

Na i saw his wheels at the cruise they are not the ones i'm after, i want the wheels with black polish where as he's is just the polish finish.
22-03-2009, 08:33 PM
Rein

nice choice of rims.. but hope your getting a much smaller offset than his..
22-03-2009, 08:38 PM
E_Honda

Quote:

Originally Posted by Rein

nice choice of rims.. but hope your getting a much smaller offset than his..

+47 with 18x8 should be ok shouldn't it? that should tuck under the guard pretty well
22-03-2009, 08:46 PM
Rein

not planning to roll the guards? its worth it.. if you want to stand out from all the other euros that have 18s and dumped. get a 8.5inch wide minimum and lower offset.
now im running 18x9.5 45+ for front and 18x8.5 42+ on rear. had problems with the 9.5 on rear. the wheels were rubbing my ciolovers.
22-03-2009, 08:52 PM
E_Honda

Quote:

Originally Posted by Rein

not planning to roll the guards? its worth it.. if you want to stand out from all the other euros that have 18s and dumped. get a 8.5inch wide minimum and lower offset.
now im running 18x9.5 45+ for front and 18x8.5 42+ on rear. had problems with the 9.5 on rear. the wheels were rubbing my ciolovers.

damn! i didn't know your wheels were that wide Your ride looks nice man. I'd prefer not to have to roll the guards.

I'm aiming for this look but with 18" instead, it looks like these are probably 19x8.5 or so from the look of the rear tyres

http://i611.photobucket.com/albums/t...a/DSC01939.jpg
http://i611.photobucket.com/albums/t...a/DSC01929.jpg
22-03-2009, 09:47 PM
.QD

He's running 8.5" front and 9.5" rear.

This is what you want....
http://myeuro.qrisworld.com/images/sc1-70mm.jpg
Or with the step rim even hotter.
http://myeuro.qrisworld.com/images/sc1_step_rim.jpg

Wish I found these when I was getting mine. MSP + 19x8 or 8.5 allround +42 and step rim = Hot!
22-03-2009, 11:57 PM
defibros

These Rims are so hawt! ....

So vip style :)
23-03-2009, 06:36 AM
Crapdaz

man hahaha feel your power drain once you got those on hahaha :p
must admit they are nice but would be a pain to clean.
23-03-2009, 08:29 AM
E_Honda

Quote:

Originally Posted by .QD

He's running 8.5" front and 9.5" rear.

This is what you want....
http://myeuro.qrisworld.com/images/sc1-70mm.jpg
Or with the step rim even hotter.
http://myeuro.qrisworld.com/images/sc1_step_rim.jpg

Wish I found these when I was getting mine. MSP + 19x8 or 8.5 allround +42 and step rim = Hot!

DO you know if that guy in the pic is running 19" ?

wtf i've never seen a step in rim before looks different, in those boxes are they 18"?

I'm trying to work out 18" rim specs that i can have wide tyres + a nice dish/lip front and back and offset that will all fit under the guard without having to roll my guards. +47 offset 18x8 would fit with 50mm lip i was told by Work themselves when i emailed them.
23-03-2009, 09:42 AM
.QD

50mm lip is shit. I have +47 with 50mm lip. Not enough lip. Looks flush. My wheels are only good if you want to upgrade your brakes.. it will clear.

..and yeah he's running 19's, dont know what offset though. try and find him on tsxclub.com.
23-03-2009, 09:54 AM
E_Honda

Quote:

Originally Posted by .QD

50mm lip is shit. I have +47 with 50mm lip. Not enough lip. Looks flush. My wheels are only good if you want to upgrade your brakes.. it will clear.

..and yeah he's running 19's, dont know what offset though. try and find him on tsxclub.com.

so do i have to run something like +45 to get a bigger lip you reckon?
23-03-2009, 10:50 AM
Crapdaz

i think your talking about deep dish. offset plays minor part which lower gives more.
dependent on wheel design and style.
23-03-2009, 11:02 AM
E_Honda

Quote:

Originally Posted by Crapdaz

i think your talking about deep dish. offset plays minor part which lower gives more.
dependent on wheel design and style.

so being a custom made wheel can i simply ask for more of a dish on the 18" wheel while keeping the offset?
23-03-2009, 11:10 AM
Crapdaz

you have to sacrifice.

If you want more dish then you sacrifice for a lower offset which in result makes your wheel stick further out than your guards.

So if it were custom you would only be limited by the above statement.
Go around to a wheelshop or something around the area and look at +40offset wheels and see how nice the dish is for them and then start from there.
23-03-2009, 11:34 AM
E_Honda

Quote:

Originally Posted by Crapdaz

you have to sacrifice.

If you want more dish then you sacrifice for a lower offset which in result makes your wheel stick further out than your guards.

So if it were custom you would only be limited by the above statement.
Go around to a wheelshop or something around the area and look at +40offset wheels and see how nice the dish is for them and then start from there.

Well i know i need greater offset than +42 cause my old 19" wheels were +42 and rears would scrape, so +45 and up on the new 18" is really what i need to avoid hitting the inner guard with the camber i'm currently running.

Are your wheels 18"? and what offset? cause yours tuck under the guards pretty nice
23-03-2009, 11:52 AM
Crapdaz

thanks man, mine are +43.
running -1 deg i think from after wheel alignment will check when i find the result sheet.
no scrubbing and i am on the lowest setting already on my tein mfp. 0finger gap
23-03-2009, 12:24 PM
E_Honda

Quote:

Originally Posted by Crapdaz

thanks man, mine are +43.
running -1 deg i think from after wheel alignment will check when i find the result sheet.
no scrubbing and i am on the lowest setting already on my tein mfp. 0finger gap

thats pretty good if your not scrubbing, and yours are 18x8 or 19x8?
23-03-2009, 02:13 PM
Crapdaz

my CE28N are +50offset 18x7.5
my Gramlights Timeattack which you saw are +43 18x7.5.

both wheels i have are same sizes but diff offset.
23-03-2009, 02:52 PM
E_Honda

i signed up on tsxclub.com and found the dude that owns this car and sent him a private message to get specs on his wheels, just waiting for a reply now.

http://i611.photobucket.com/albums/t...a/DSC01929.jpg
http://i611.photobucket.com/albums/t...a/DSC01881.jpg
http://i611.photobucket.com/albums/t...a/DSC01935.jpg

But from the looks of your wheels Darren i think if i go for 18x8 +47 offset on the fronts and 18x8.5 or 18x9 on the rear with a bigger offset of like +50 if possible it should all fit. I might go to a wheel place to see what specs they think will fit so i can be sure.
23-03-2009, 03:09 PM
jdmEG5

same rims diff size?
23-03-2009, 03:13 PM
E_Honda

Quote:

Originally Posted by jdmEG5

same rims diff size?

Yeah i'm assuming he's are 19" from the pics, i'm after 18"
23-03-2009, 03:15 PM
jdmEG5

ok give me 30 mins :)

(well i'll try my best)
23-03-2009, 03:38 PM
E_Honda

Quote:

Originally Posted by jdmEG5

ok give me 30 mins :)

(well i'll try my best)

no worries, take your time
23-03-2009, 03:41 PM
jdmEG5

http://img27.imageshack.us/img27/3737/euro1r.jpg
http://img27.imageshack.us/img27/euro1r.jpg/1/w800.png

thats possibly 18inch :) hope u like it
23-03-2009, 03:56 PM
E_Honda

Quote:

Originally Posted by jdmEG5

http://img27.imageshack.us/img27/3737/euro1r.jpg
http://img27.imageshack.us/img27/euro1r.jpg/1/w800.png

thats possibly 18inch :) hope u like it

thanks man, looks about right :thumbsup:
23-03-2009, 05:38 PM
jdmEG5

nws bro ;)

All times are GMT +10. The time now is 03:35 AM.

All logos and trademarks in this site are the property of their respective owner(s). The comments are the property of their posters.