Vtec doesnt work!

Printable View

10-07-2009, 09:02 PM
duckey

Vtec doesnt work!

hey guys, ive got a aus spec B16a2 motor and it seems the vtec is not working
why i think it doesnt work? its because theres no crossover and theres no pull, its the same all the way..

i have a few ideas what to do, but before i do it, i wana make sure

check the vtec solinoid - NOT DONE
check oil level - DONE
check temperature leve -DONE
Check wiring- DONE

Please ,if anyone can help it would be a pleasure.. sorrry if theres a thread about this i just cant find it.... if so is it possible to link me the "D.I.Y THREAD OF CHECKING/FIXING/CHANGING THE VTEC SOLINOID

THANX AGAIN!
10-07-2009, 09:09 PM
mrwillz

try this for codes first brother b16a2
http://www.ozhonda.com/forum/showthr...highlight=vtec
10-07-2009, 09:11 PM
MMike

In the scenario that it's a solenoid issue, have a look at this which could possibly help you,
B16A solenoid thread

Good luck :)
10-07-2009, 09:55 PM
duckey

thanks Mrwillz and MMike! :)
10-07-2009, 10:05 PM
duckey

anything more easier to do?
11-07-2009, 09:32 AM
Nepolian

Quote:

Originally Posted by duckey

anything more easier to do?

You can wash your car LOL......

Otherwise you might have to follow those checking procedures. Otherwise take it to a mechanic and pay them.
11-07-2009, 09:36 AM
tayl51601

Is your speedo working?
11-07-2009, 11:27 AM
duckey

Quote:

Originally Posted by nepolian

you can wash your car lol......

Otherwise you might have to follow those checking procedures. Otherwise take it to a mechanic and pay them.

ha ha ha ha!
11-07-2009, 11:28 AM
duckey

Quote:

Originally Posted by tayl51601

Is your speedo working?

yes the speedo is working!
11-07-2009, 01:08 PM
RtN

lol was the engine warm when you tried to vtec?
11-07-2009, 05:52 PM
duckey

Quote:

Originally Posted by RtN

lol was the engine warm when you tried to vtec?

its been like this for a few months!
11-07-2009, 06:11 PM
mack

did the VTEC work earlier but suddenly stop or did you buy the car like that?

If you just got the car maybe try remove the standard air box and replace it with an exposed filter, sometimes with the stock air box you can't hear VTEC engage when in fact it is.... btw i'm assuming your car is running stock air filter
11-07-2009, 06:58 PM
TODA AU

Test Vtec solinoid with power probe & test wiring
Check vehicle speed sensor wiring to ECU
Check engine coolant temp sensor resistance & wiring (2 pin plug - single wire plug is for dash)
Check TPS resistance / output & wiring
13-07-2009, 12:21 AM
Limbo

check oil pressure also
13-07-2009, 02:31 PM
duckey

Quote:

Originally Posted by mack

did the VTEC work earlier but suddenly stop or did you buy the car like that?

If you just got the car maybe try remove the standard air box and replace it with an exposed filter, sometimes with the stock air box you can't hear VTEC engage when in fact it is.... btw i'm assuming your car is running stock air filter

hey mate.yeh the vtec was working it had an engine conversion b16a2 on a eg was working but was playing up sometimes it would work sometimes not and then all of a sudden it doesnt work at all...
13-07-2009, 02:34 PM
duckey

Quote:

Originally Posted by TODA AU

Test Vtec solinoid with power probe & test wiring
Check vehicle speed sensor wiring to ECU
Check engine coolant temp sensor resistance & wiring (2 pin plug - single wire plug is for dash)
Check TPS resistance / output & wiring

hey... thanks for the tips...but not really to sure what to do...
if i brought it to you how much roughly would u charge to fix it?