dc2r spark plugs + leads

Printable View

20-07-2009, 02:49 PM
rmalov

dc2r spark plugs + leads

can any1 tell me what are good spark plugs and leads to get for a 2000dc2r
can you please tell me the brand and codes

cheers
20-07-2009, 02:59 PM
joe.teg

NGK plugs are pretty good not sure about the code but
20-07-2009, 07:32 PM
DLO01

Copper NGK - BKR7E-11

Iridium NGK - BKR7EIX-11

Leads, OEM or any other decent brand.
23-07-2009, 09:11 AM
Neesmo31

Oem are the way to go - prices are going up tho. I got a quote from our local honda dealer here for shits and giggles - 140 bucks for 4 plugs. Im not sure what i paid for leads tho, but they were somewhere around the 200 regeon i beleive.
23-07-2009, 12:49 PM
90LAN

spoon leads
ngk leads not the aussie made ones
but jap spec ones

iriway and ngk spark plugs
23-07-2009, 01:44 PM
markoJEK1

OEM heat range for sprak plugs is 6 , most guys on here will tell you to go 7, imo you dont need 7's as our motors are NA and stock, you shouldnt have any overheating issuses leading to detonation (which what many people are paranoid about). Think 6's will give you a better burn ( + good fuel ) vs the 7's.
23-07-2009, 02:37 PM
90LAN

Quote:

Originally Posted by markoJEK1

OEM heat range for sprak plugs is 6 , most guys on here will tell you to go 7, imo you dont need 7's as our motors are NA and stock, you shouldnt have any overheating issuses leading to detonation (which what many people are paranoid about). Think 6's will give you a better burn ( + good fuel ) vs the 7's.

standard for b16a is a 6
itr is a 7
oem heat range
23-07-2009, 03:50 PM
kevster

NGK Spark Plugs Part #7092 BKR6EGP bought these from the states pretty cheap but heat range is 6 and theyre platinum.

NGK PART # 6988 BKR7EIX-11 QTY 4 NGK Iridium IX Spark Plugs 29 us + 19 us for shipping
23-07-2009, 07:10 PM
markoJEK1

there you go 6 heat range for b16, 7 for ITR , wd lan :P
24-07-2009, 12:21 AM
adnoh

my car is JDM DC2-R .

my mechanic recommend me use NGK : PFR6G-13

some1 can verify it?

Thanks
24-07-2009, 06:53 AM
90LAN

Quote:

Originally Posted by adnoh

my car is JDM DC2-R .

my mechanic recommend me use NGK : PFR6G-13

some1 can verify it?

Thanks

just look under your hood if it still has the jdm sticker telling you what your spark plugs they recommend
but you need 7's

some aussie mechanics just dont get jdm hondas
24-07-2009, 09:14 AM
dsp26

ngk iriway/iritops are good but their factory gapped to 0.8mm though... Honda B-series are 0.9mm

but then again i don't get the big deal, oem coil was able to fire my 11:1 B16 all the way to 9200rpm without a single misfire on a 1.3mm gap on BKR6EIX-11
23-08-2009, 01:49 AM
cris88

since ur talking about sparkies and leads how often would u guys replace them?? on itr sorry to hijack thread :)