Jdm b18c

Printable View

29-09-2009, 04:33 PM
kairi_k

Jdm b18c

hey guys how do you tell if a B18C is JDM? the engine codes on the block??? where do i check and what should it read? B18C1....???

cheers
29-09-2009, 04:40 PM
POPSIKAL

jdm b18c block will just read b18c, that is out of the sir-g which is the jdm version of the vti-r here in australia, b18cR is from the jdm type r, hope that helps you mate
29-09-2009, 06:40 PM
saikou27

http://en.wikipedia.org/wiki/Honda_B_engine

jdm engines all read B18C. this applies to both the gsr and type r motor. the type r motor does not read B18CR like mentioned above.
29-09-2009, 08:20 PM
POPSIKAL

ok wasnt sure if it did thats why i didnt say it read that, but thanks saikou
29-09-2009, 08:27 PM
g_kn

" b18c "
29-09-2009, 09:07 PM
mooks145

jdm B18C reads as B18C, not B18cR
29-09-2009, 10:48 PM
ajbm

JDM = B18c (engine number) SiR/SiR II integras
USDM B18c (engine number) GSR
AUDM = B18c1/b18c2 (engine number) Vti-R
jdm spec slightly produce more power than their international counterparts
29-09-2009, 10:54 PM
markoJEK1

B18C1 is from a gsr (usdm vti-r)

B18c
xxxxxxxxxx
JDM SiRg + ITR
ITR has red engine cover = 200ps (147kw)

B18c2
xxxxxxxxxx
AU VTiR = 125kw

B18c5
xxxxxxxxxx
= USDM ITR = 195ps

B18c7
xxxxxxxxxx
= AUDM ITR = 190ps - (141kw)
30-09-2009, 03:37 AM
kairi_k

mine says b18c1.....? not sure what the one is? the start of the engine no. do jdm engine numbers tart with a one?
30-09-2009, 06:20 AM
GSi_PSi

if its b18c1 its usdm vtir motor.
Check your engine block. I think you are confusing your vin number.
http://my.prostreetonline.com/photos...gineNumber.jpg
30-09-2009, 08:03 AM
SuiJin

B18C1

* VTEC (Dual Stage Intake Manifold)
* Found in :
o 1994-2001 Acura Integra GS-R (DC2)
+ Power : 170 hp (127 kW) @ 7100 rpm & 128 ft·lbf (173 N·m) @ 6200 rpm
+ Redline : 9000 rpm (limiter @ 8500 rpm)
+ VTEC Switchover : 4400 rpm
+ Intake Manifold Switchover : 5750 rpm
+ Displacement : 1797 cc
+ Compression : 10:1
+ Bore : 81
+ Stroke : 87.2 mm
+ Rod Length : 137.9 mm
+ Rod/Stroke : 1.58
+ Transmission: s80
+ VTEC Engagement: 5800 Rpm

http://en.wikipedia.org/wiki/Honda_B_engine
30-09-2009, 08:38 AM
defect

Yep it should just say B18C with a bunch of numbers under it.
30-09-2009, 10:56 AM
kairi_k

Quote:

Originally Posted by GSi_PSi

if its b18c1 its usdm vtir motor.
Check your engine block. I think you are confusing your vin number.
http://my.prostreetonline.com/photos...gineNumber.jpg

yeah my bad thats the vin no. lol what should a jdm vin no read as b18c1.....?

not referring to pic only quote
30-09-2009, 12:16 PM
defect

that is the ENGINE number.
on the jdm b18c motors, It stamps "B18C", under it, it has a bunch of numbers, so that picture above is a JDM B18C

If your motor is stamped b18c1 (it means yours is imported vtir motor)

Our b18C vtir motor is B18C2
Our type R b18c is stamped B18C7
30-09-2009, 12:21 PM
kairi_k

Quote:

Originally Posted by defect

that is the ENGINE number.
on the jdm b18c motors, It stamps "B18C", under it, it has a bunch of numbers, so that picture above is a JDM B18C

If your motor is stamped b18c1 (it means yours is imported vtir motor)

Our b18C vtir motor is B18C2
Our type R b18c is stamped B18C7

ok yeah mines stamped b18c. but how do i know its a type r motor not a vti-r equivalent with red rocket cover? and also wanna check if chassis is type r not the vtir equivalent.
30-09-2009, 06:33 PM
saikou27

Quote:

Originally Posted by kairi_k

ok yeah mines stamped b18c. but how do i know its a type r motor not a vti-r equivalent with red rocket cover? and also wanna check if chassis is type r not the vtir equivalent.

the head will have a different code. im pretty sure that vtir spec says P72 or P73 and that the type says PR3.

correct me if im wrong as im not 100%