Antenna Removal while keeping the stock look!
Disclaimer: The following is provided as a GUIDE ONLY, and neither myself nor Ozhonda take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!
Aim:
To remove the antenna but keep the stock look!?
For a long time I've been wanting to remove the antenna because I never use it but I never did like those antenna block off plates and a piece of tape over the hole wasn't gonna cut it for me!
Finially a solution!
Required:
* A hacksaw blade
* A Glove
Steps:
There's just 1!
Cut the sucker off!!
So slip on ya glove to save the pain :p and hack-saw ya antenna off.Don't start twisting the sucker or you will bend the chassis metal:
http://i570.photobucket.com/albums/s...9/100_1586.jpg
That's where it was,I didn't get a shot of it in there:
http://i570.photobucket.com/albums/s...9/100_1584.jpg
But,here it is:
http://i570.photobucket.com/albums/s...9/100_1540.jpg
http://i570.photobucket.com/albums/s...9/100_1543.jpg
Gone!
http://i570.photobucket.com/albums/s...9/100_1541.jpg
Stock look retained:
http://i570.photobucket.com/albums/s...9/100_1544.jpg
Other comments:
A lighter car is a quicker car :honda:
