HID and Carbon Plug Cover install on DC2R

Hi All,

I recently got a Championship White DC2R and although I have promised my wife I wont go mad on it, I did want to make a few small changes.

In an amazing co-incidence, Platinum Visuals announced a sale on HID kits and Carbon Fiber spark plug covers the day before I picked up my new car, so I secretly sold some car parts to help fund the new aquisitions!

First off, the Carbon Fiber spark plug cover, it was much cheaper than some others I have seen (around $72), and as the first CF thing I have ever bought, the quality is quite good, the resin is nice and clear, no bubbles and the shape allowed easy fitment to my cam-cover without any force, it just dropped straight in!

I think the only advice I would give with one of these is to find some small rubber o-rings to use between the cover nuts as I was worried about how tight to do them up against the CF.

http://gallery.2dingos.com.au/albums...ver1.sized.jpg

http://gallery.2dingos.com.au/albums...ver2.sized.jpg

Matches with my CF Whale You-Know-What huh??

http://gallery.2dingos.com.au/albums...ver3.sized.jpg

Then it was HID time, again, I have never tried these before, but the instructions were easy enough to follow, the only part was that it said you should upgrade the headlight fuse to 20A, which turns out is recommended when you use the Hi/Lo kit..

These kits have an 18 month warranty, and at $112, was a great purchase, and Aytac from Platinum Visuals responded almost instantly to my email questions about the fuses, I was worried I was going to stuff something up! The kit components are well made and quite neat looking, and all up didn't really weigh that much for those thinking of extra weight on a DC2R.

Putting them in was fairly simple, and the only sort of hard part was mounting the Ballasts, luckily for the DC2R, there was some perfect points that already had things bolted I could use.

These units come with Power-Off and Wrong-Terminal protection, which in my case was needed, as when I got my car there was NO BULBS at all, the previous owner had removed the bulbs, and the plugs were missing too!

I sourced some plugs off a Toyota that were the same, but did not realise the + and - are reversed (silly Toyota for having a black wire as pos) but using a multimeter, soon sorted this all out.

When the lights are on, they light up the road like nothing I have ever had before, and I have not had any flashes from oncoming traffic, so they must be aimed well enough to not blind oncoming cars.. They work well in the rain, and the brightness now of road signs and road reflectors is great.

Here are some pics of my installation, no nightime pics yet..

This is the Ballast installed on the drivers side, using the bracket for the ABS/Air filter to mount it

http://gallery.2dingos.com.au/albums...ers1.sized.jpg

This is the Ballast installed on the passenger side, used a small bracket that holds a wiring loom plug to mount it

http://gallery.2dingos.com.au/albums...ide2.sized.jpg

This shows the HID when on

http://gallery.2dingos.com.au/albums..._on1.sized.jpg

Slightly closer view

http://gallery.2dingos.com.au/albums..._on2.sized.jpg

View with bonnet closed, nice and bright

http://gallery.2dingos.com.au/albums..._on3.sized.jpg

So all up, for less than $200 I have ended up with some nice mods to my car, Aytac at Platinum Visuals was easy to deal with, and very helpful. Feel free to PM me for any info/suggestions etc

Check out the HID sale thread below

Platinum Visuals HID's

Cheers

Tseesinngwailo

Hey, did you have to change the standard headlight bulb plugs?

No, the kit just plugs into your standard OEM plugs, I only had issues cause I used the Toyota plugs on my car, so the wiring was wrong way around.

Cheers
Chris

Always good to see a happy customer!

Chris!!!!!!!!!!

You've got your dream car, how do you like it?

Quote:

---

Originally Posted by Bludger

Chris!!!!!!!!!!

You've got your dream car, how do you like it?

---

I love it! very happy, and very lucky there was a sale on the day bfore I got it hahaha, I have always wanted HID, so its good to have, much better than standard lights..

Hopefully will bring it along to a meet soon

Cheers

Chris

Sorry for being a bit off topic but is that a J's intake yeah? hows it go?

Quote:

---

Originally Posted by jazzadc2r

Sorry for being a bit off topic but is that a J's intake yeah? hows it go?

---

goes great, but am thinking of selling it, or modifying it to take a standard DC2R airbox. The rubber seal around the pipe from the valve cover has a leak, so whistles under acceleration.

I get the same whistle from my standard airbox under load lol but havent found whats doing it yet

its normal.

I'll have to start a "whistling intake thread " lol, this thread has been hijacked haha

I have since put the rubber o-rings under the nuts for the carbon fiber plug cover, they are nice and secure now

Will be doing another write up as will be putting the new LED's in my parkers and numberplate lights

all u need to do now is degrease and clean the red and it will look nice with the carbon fibre cover...

any hints on how to get the "Honda" and the "DOHC VTEC" on the cam cover nice and shiny again? mine have got this sorta corroded look.

You can possibly get sand paper and sand it carefully making sure you don't sand the red bit and then polishing it with some metal polish.

Good trick is to get a pen/pencil/stick and wrap sand paper around that for working around small areas :)

good tip! ill try that tonight thanks

Make sure you use a fine grit, it will take a little longer, but it won't leave lines on it like a lower grit rough paper would.

Good luck!

I thought my cover was faded, will give it a light wash, if I can get a spare cover cheap enough, will get it powdercoated in yellow like the Spoon ones, then the Carbon Fiber cover will look even better!

there is a DIY on doing a respray
http://www.ozhonda.com/forum/showthread.php?t=70585

Im thinking about it, but it looks like it'll take alot of time to do at home

haha thanks 2 u i got the hids u made it look so easy to do and it was after some help from Aytac :) those ballasts are a pain to find space 4 them in a eg5 thought

Install my hid's yesterday. Anyone get a weird audible buzz noise coming from the ballasts when you turn on your headlights for the 1st 10 sec?

Quote:

---

Originally Posted by ninzee

haha thanks 2 u i got the hids u made it look so easy to do and it was after some help from Aytac :) those ballasts are a pain to find space 4 them in a eg5 thought

---

where did u decide to mount them? mines a mess!

pics would be great nino :D

Quote:

---

Originally Posted by japcollector

Install my hid's yesterday. Anyone get a weird audible buzz noise coming from the ballasts when you turn on your headlights for the 1st 10 sec?

---

its the ballisters powering up - its normal.

the whistle is from the filter not a leak. it happens with any pod filter

Quote:

---

Originally Posted by GSi_PSi

the whistle is from the filter not a leak. it happens with any pod filter

---

Nah my car wasn't even on. 100% positive its coming from the two ballast

Quote:

---

Originally Posted by kcokla

its the ballisters powering up - its normal.

---

Yeah i think ur right went to check it out and notice the bulbs gets brighter during the buzzing noise coming from the ballast

That's normal japcollector :)

lol at last 3 photos... the closer shot and the one with the bonnet closed really give you alot more detail than the 1st one haha

Quote:

---

Originally Posted by kcokla

where did u decide to mount them? mines a mess!

pics would be great nino :D.

---

lol ill get u some 2moz morning the passenger side sits alright but my drivers a bit of a mess because of my shitty intake lol and ill get some pics of them in action at night there awsome :)

look forward to it!

my driver one is hidious, everything sits in the little area between the power steering fluid and below the fuse box, that little 'dip' and its shocking - hahahhaha

Don't you mean your passenger side KC ;)