Im getting this info on behalf of a mate, but he's got a Integra GSI and is getting this set up.
Extractors 4-2-1, H/F cat converter, all the way through a 2.25" exhaust.
does anyone know what rough KW gain he'd get? :?:
Printable View
Im getting this info on behalf of a mate, but he's got a Integra GSI and is getting this set up.
Extractors 4-2-1, H/F cat converter, all the way through a 2.25" exhaust.
does anyone know what rough KW gain he'd get? :?:
107kw -> 115kw maybe
thats not to bad.. has anyone got any other views?
8kw ?? Thats quite a lot man.. I doubt you'll really get much gain.. but you will be able to feel the car go smoother and probaly a better top end.. just my 2c...
thats flywheel kw's -> so its only about 5kw@wheels
i had nearly had the same setup but i didnt have headers, I had a CAI instead.
I got 75kws
My Gf's brother had only has 2.25 in exhaust no high flow cat and short ram intake and got 68kw at the wheels.
Both cars we GSI's
hold on a sec
ur gsi only makes 75 kw at the wheels??
my old vti civic made 79 kw at the wheels
my bro's '89 integra ls makes 88 kw at the wheels!
i'm still waitin to dyno my gsi
... comparing dyno readouts is not a good habit. particularly when the readouts are from different dynos on different days :)
they can give wildly different readouts.
"my old vti civic made 79 kw at the wheels
my bro's '89 integra ls makes 88 kw at the wheels!"
hehe alotta power for a civic vti and a integra LS
i dunt even fink my dc2 vtir can make 88 kws atw.
A standard DC2 is rated at 125kw. What does that convert to at the wheel?
when i did my dyno tune it was with bmt and from what i heard its abit tuned down
got about 53kw atw
prelude vti-rs get about 70kws there so yeah tahts a rough measurement
fark, those reading are pretty low
yeah, it was a ~35 degree day using an APA dyno
i suppose the readings from this dyno are a bit higher than others as u don't lose power through the wheels as it bolts straight on the hub...
A GSI is 107kw at the fly. So I dont think 75kw is a low reading for a GSI with basic mods. I think it a very realistic figure.
I only gave this as an idea on what he might expect from the mods that were posted in the original post.
Away I have 120kw @ the wheels on my GSI now. :P
WTF??? are you serious??Quote:
Originally Posted by integra97
what have ya done?
btw, isn't 30% power loss from flywheel to treads a bit much :?
any of you guys read the latest speed magazine?
if not then READ IT!!
they have VTEC TUNING GUIDE, finally they did something for Honda :)
i can't remember if they have the exact mods you listed SpiceyTeg but you'll get a basic idea too.
Yep 120kw, helps when you have a little boost. :D
Roughly 70% drive train loss I've heard.Quote:
Originally Posted by vti-2
I mean, 30% drivetrain loss, so .7 x 125 = 87.5