Printable View
Hay guys i recently got a 1992 4th Gen Prelude, and i bought Fusion 10" active enclosure today, but my trouble is trying to find a hole in the firewall so i can get the power cable from the battery through to my boot. If anyone else has had trouble with this and found a way through, i would love to know...
Thanks in advance
Not sure about the prelude but quite often there will be rubber grommets which represent a hole in the firewall where you can run your cable through. Just ensure there are no sharp edges in the metal. If so put some protection in for the cable. It might take you awhile to find a hole/opening in the firewall. Easiest is to pop the bonnet and look at the firewall from there.
yea i looked for about an hour today and found multiple grommets but they all lead into something that wasn't accessible unless i removed my whole electronic dash, and i sure as hell don't plan on doing that but thanks for the help any ways.
smack bang in the middle and i mean that literally, grab a torch and about almost a foot down you'l find what you need,
if u cant grab it pm or somethin and ill take a photo
Thanks man, but still no luck i couldn't find it - if you can, can you post the pics?
alright gimme a sec ill go take a pic
alright, were gonna follow the orange wire, thats my sub wire
http://i71.photobucket.com/albums/i1...2/IMG_0184.jpg,
you can see it run from the battery around and down
http://i71.photobucket.com/albums/i1...2/IMG_0186.jpg
and up close of were it penetrates the firewall.....giggity
http://i71.photobucket.com/albums/i1...2/IMG_0185.jpg
feel free to rep me lol
Hay man i looked in there just below the silver box thing, and i think i found it but...
There is a little cable that is coming out of it that is connected to a bolt hanging onto a larger cable. Im not sure what it is hbu? im uploading a picture now, one sec
cant really make out whats connected to the top one it may just be a screw to plug the hole
Hay thanks anyways but we found a plugged up hole on the other side it was out in the open but we thought there was something behind it, i end up cutting some of the insulation open so i could stick my fingers through and end up pulling through the cables. but yea, all in all a very tough effort. Im gonna rep you for your help.
Oh btw, nice engine top, where'd ya get it? Did you get a respray?
lol thanks,
stripped back mine and sprayed it with some engine enamel from autobahn, all up cost me 19.65 very cheap and nice DIY
Yea it looks good, im going for a blue feel to my car, its white but im getting some blue LED interior lights and i wanna get some new engine bay piping, so im thinking blue there aswell.
i was gonna do the same thing til i bought the s,
its got interior and exterior blue neons blue drift oil cap and a blue coolant cap
Hmm, sounds good. The sub i bought has a big green fusion logo but im still thinking go with the blue theme. As for interior neons im thiking the bendable LED types you can get from like REPCO and stuff. Might bend them round the edge of the boot, but it all depends on how i go with money.
well what ever you do make sure u dont mix the neon tubes with the LED's the colours dont match up and makes it look reaaaalllly cheap, id stick with the leds, flexible, easier to mount, next to no power drain and harder to break!Quote:
Originally Posted by Chirpy_92Lude
Mkay. I'll remember that. Thanks heaps for everything
Cut a hole in it
thats the stupidest thing ive ever heard, and besides, my sub is in and working now, so your a bit late.