Printable View
Hey guys I need help with this.
Oil is leaking as you can see in the pic. I'm guessing the rear engine seal needs replacing ? not sure Is this easy to fix yourself ? Or approx just roughly how much would mechanic charge.
http://i957.photobucket.com/albums/a...a/IMG_2452.jpg
http://i957.photobucket.com/albums/a...a/IMG_2453.jpg
http://i957.photobucket.com/albums/a...aa/thisone.jpg
(leakage across where engine no. is stamped)
Thanks OH ! :thumbsup:
Mate, wheres that oil coming from?Quote:
Originally Posted by Premature Vtec
1st, looks like your rocker cover gasket was leaking at some stage, don't know if that's an issue. It looks a bit dirty, but dry.
But your real problem is lower down on your engine bro'. Looks like its losing oil from your head gasket area. Not too easy to do for an inexperienced person (+ you need to get the head machined), but should be a good learning experience provided you have the tools. Mechanic will charge you a lot.
Why do you think the rear seal is leaking? You would't be able to see it anyway in the pic anyway.
More info please. When did it start? Have you checked your temperature guage lately? Is the car slow to start? Have you lost coolant? Is the coolant in the radiator milky and oily?
It looks like a substantial leak. If you haven't taken apart a head before, and u don't have any mates with experience, get some quotes from a few mechanics. Prices will vary, so shop around. Headgasket woes can cost hundreds.
The temp is fine, yeah there is coolant dripping also but not badly. The pic shown is just where I noticed the leak from im not 100% sure if its rear engine seal thats why i posted here. Nah oil isn't leaking from lower down the engine just from at the top of where the leak is.
Thanks for the effort and reply ! +1 rep
hey mate, its hard to tell exactly where an oil leak is coming from based on a picture but a sure way to find it yourself is to degrease the engine and use compressed air to remove excess water, or just run your engine for a while. Then use talkum powder to powder around the areas where you are suspecting the leak to be coming from, this usually allows you to pinpoint exactly where the leak is coming from so you can point it out to your mechanic and it'll save you money beacuse they won't have to spend too much time diagnosing the problem. In regards to costs, different mechanics charge different rates based on how long it takes to diagnose the problem, how hard it'll be to fix, what parts are needed to fix it and how much labour is involved.
i hoped this helped you out a bit and goodluck with resolving your problem.
hmm thanks ^ i added another photo if it helps. I'm just hoping not 2 pay $500+ to get it fixed (student budget)
I meant lower down than the tappet cover (rocker cover). It's obviously coming from the front part of the head gasket area, I can't imagine what else it could be.Quote:
Originally Posted by Premature Vtec
Where's the coolant coming from? Check it out in the morning. Could be unrelated. Keep an eye on your Temp gauge just in case.
Can I get a second opinion anyone?
Also would like second opinion ...
looks like its leaking from inbetween the head and the block and that could only mean headgasket. has it ever overheated on you before?
Once, when i hit vtec and then parked up (while car was still on) there was abit of smoke comming from engine but have since replaced coolant fluids and everything seem's fine
Get a couple of mechanics to look at it like I said. Here on Ozhonda we don't give out quotes so that's your best bet.Quote:
Originally Posted by Premature Vtec
Like i said before, it looks like blown head gasket , and unfortunately it'll be more than 500 bucks. A backyard mechanic might charge 500 if ur lucky (i guess- maybe if ur lucky). Shop around.
Thought this was interesting proberly just a short term fix, although dont blownheads usually have white smoke comming out from muffler ? My car seem's to be running fine.
http://www.youtube.com/watch?v=3suQy44G_B0
The guy on the video said that it's a long term solution LOL! He also said "no solids, can't harm your engine" and that his car has been going for 10 years after using that crap. 'He sounds like a real dodgy salesman.Quote:
Originally Posted by Premature Vtec
Who knows what that shit will do to your engine. Get it done right the 1st time IMO.
Taken it to a shop yet? Get some professional quotes, they will be free and you'll have a definite diagnosis of your problems.
soughta looks like it might be leaking from the either cam grommet or spool valve o-ring. pretty sure there is a DIY on here on how to re-seal the cam grommet. Take a pic from side on, pretty hard to see from the above angles
Thanks for input, side picture is posted on 1st pageQuote:
Originally Posted by markismaximus
Mate looks like its leaking from the head gasket.
not easy job or cheap to get it fixed. qet a few quotes. i had to replace the head gasket on my old DA9 plus timimg belt and water pump came out to like $800
Just had a look at the new pics you posted, i would try degreasing the area to get rid of all the build up etc so you can see where the oil is coming from exactly.
that definitely looks like cam grommet or spool valve o-ring to me. but as some have mentioned try cleaning the area with degreaser and it will give you a better idea of where its coming fromQuote:
Originally Posted by Premature Vtec
this is on a non-vtec motor but the principle is the same:
http://www.ozhonda.com/forum/showthr...highlight=seal
i had a similar leak a while ago, turned out to be the vtak solenoid gasket that goes between the solenoid at itself and head
Thank you for all the replies yeah tomorrow i will degrease and clean then see where the leak is comming from. +1 Rep to thoze who had the effort 2 post and help
dude just look for the highest point the oil is coming from and look around that area... PM me if you need help
PM SENT !Quote:
Originally Posted by aznsiko
It seems like benjamins DIY Upper head gaskets replacement/reseal. would resolve this problem ? as leak looks like its comming from the valve o-ring as markis has said
vtec solenoid and spool valve are the same thingQuote:
Originally Posted by vinnY
yonas sells these. $35
http://farm3.static.flickr.com/2465/...4024c8.jpg?v=0
PM sent. Thanks markis
it will most likely be one of the two. see attached pic for each item. highlighted in red. the seal above is the lower highlighted part
http://i225.photobucket.com/albums/d...sida/seals.jpg
You are a legend. I would give you another +1 if i could thanks so much mate.