Printable View
Hey guys,
I've had HIDs on my Euro for over 2 years now but I've now decided to switch them back to stock now that I've got my car back from the hail repair.
The funny thing is, I can't seem to remember if my original H1 lo beam bulb had 2 pins or 1? I bought a set of Phillips Crystal Visions from AB and when I tried to put them in, I realised that there were 2 connectors but only 1 pin on the bulb.
Am I missing something?
Out of curiosity, how come you're changing them back to normal halogens =S
Well, one of the ballast blew so instead on changing HIDs, I decided that I want them back to stock.
I never knew h1 had 2 pins.
H1 should only have one pin. But on the connector, some might have 2 pins. 1 is your ground , but its a part of the connector. It doesnt go to anywhere else.
On some other cars, the headlight it self is grounded, and eliminates the other wire.
You should only have a connector with 1 female plug.
That's the thing. I know that H1 bulbs only have 1 pin and I know that my car takes H1 lo beam bulbs but where are there 2 female connectors? I tried to only connect 1 of them and tested it but the bulb doesn't light up.
maybe take a picture, not sure what u mean, and yea there should be only 1 pin, 1 pin for positive, 1 pin connects to ground.
http://i181.photobucket.com/albums/x...20825Large.jpg
Here's the 2 connectors. Did I misplace some kind of adaptor?
The funny thing is that even the user manual shows that there should only be 1 connector. What am I missing here? Feels like it's right in front of me but I'm stumped. Feel like a real noob to not be able to change my own light bulb.
OH yes, the plug with the black wire should plug in the headlight housing, I forgot exactly where it is, i think it's at the bottom just underneath where the bulb connector should be, and the red wire should connect to the h1 bulb itself.
Reason being, the h1 bulb connector acts as a conductor for the "ground", so the plug should go there.
Really? Is it that easy? So there's a male connector somewhere on the bulb housing that the black wire should go?
So does it mean that the bulb will not light up unless I've plugged both connectors to their rightful place?
Too late now, will have to give it another go tomorrow. *cross* fingers.
yea that's right, plug the black wire there, and it should work =]
Dude. By that picture. Youve completely removed the wires from the connector plug. Both those wires end up in the same connector.
Yeah exactly,Quote:
Originally Posted by OMG.JAI xD
The end of those wires you showed us should look like this or simular
http://ed-llc.com/11/9006-3.jpg
So that it can plug into the orignal socket for the lights to work.
Same connector? What do you mean? I did what I had to do to get my HIDs to work and they did. Just can't remember where I got both the wires from.Quote:
Originally Posted by OMG.JAI xD
But the H1 bulb only has 1 pin. The image above has 2 female sockets.Quote:
Originally Posted by DC2-PWR
Can someone take a photo of their lights?
E-Gene, what illusion said is correct. The black wire connects to a pin in the light housing which is hard to see. The red connects to the H1 bulb. I know coz I installed a HID kit a few weeks ago.
Yup, thanks guys for all your help. Put the wires in their rightful places and we're in business. Kinda happy to have it back as stock again.
thanks guys, came across by accident, today i tried to put my hid back to stock while i wait for new hids to come,,,didnt know where the toher female connector went so i gave up but thanks to this thread .. giving a nother shot tomro
Ahh my HID ballast blew yesterday too. Now I'm driving on one so I'm thinking of reverting back to stock.
Just FYI, there is another mount for the black wire? And the red wire goes on the bulb itself. E - Gene, could you please take a photo as I've forgotten which wire goes where! Or if you can explain which wire is wired to the bulb itself.
Cheers
red wire goes to bulb. and the black wire goes near the housing..(the connector is almost opposite to where the clip/pin hold in) if that makes sense..feel with ur thumb :DQuote:
Originally Posted by djpro1
Quote:
Originally Posted by MR_LATE
Yep great thanks. I just forgot which wire goes where haha. Somehow my left side HID came back to life after giving it a good tap. Changed the parkers back to stock yellow since they blew on both sides... They really don't last long!