Does anyone knows the offset and stud pattern of Jazz?
My friend wants to buy a set of rims off from a lancer, anyone knows whether they would fit ?
Thanks a lot !!! Cheers :)
Printable View
Does anyone knows the offset and stud pattern of Jazz?
My friend wants to buy a set of rims off from a lancer, anyone knows whether they would fit ?
Thanks a lot !!! Cheers :)
if it's of a lancer, it would fit perfect. My bro got a lancer, we swap mags to use all the time.
as for stud pat is 4x100 offset is 38+?? i think...can't remember.
That will do .... thanks a lot :)
The offset will vary depending on the size of the rim....
Anything from a +35 to a +42 can work with a 7inch rim. I have +42 with 16x7s and they are perfect
Hi, Jus-10 !!
I'm also thinking to change my stock wheels but just want to find out how you know that the offsets from 35 to 42 work perfectly. Is it from experience or from magazine research or by other means?? Not that I doubt your expertise but just want to be sure.
If I change from the VTi 14'' stock wheels to 15'', will it upset the ABS and any other systems? Thanks!
Just check out all the Jap wheel sites and they will often recommend which offset (when you look at individual rims) will fit on each car.
It's also from a bit of experience. I had Buddy Club P1s (16x7) with a +35 offset and they filled the guards well. You may have some slight issues with some rubbing on the inner guard with this offset, but nothing too bad.
I have +42 at the moment on 16x7 Gram Lights and they fit with no rubbing at all. I haven't had to do and guard rolling or anything at all...the car is also lowered about 2.5-3 inches.
You will find "recommended" sizes on Jap sites ranging from +33 to +43 but they would be pushing the limits.
If you go 15x7 with a +42 offset with 195/50 tyres you should have absolutely no issues with fitment.
Different/Bigger wheels won't upset the ABS or anything. Honda don't recommend the fitment of larger rims on the VTi (when does any dealer really advise it?) as they say there could be issues with the electric steering, but I am yet to hear of any actual cases anywhere in the world. With the above 15" setup you will have no rubbing on full lock. My theory is that if you aim for light weight wheels (try and get something at least similiar in weight to the factory wheels or lighter) you won't have any issues as you won't be placing any extra strain on the steering system if you get what I mean.
Hope that helps.
J
16x6.5 what offset should this be? and what tyres size is suitable?
+32, +35, +38
Hmm might get +38, concept 5 16x6.5 4x100
which one?
I run a 195/45 16 on my 16x7 so you could do that, or you could run a 205/40 16 no probs.
Jus-10: so with your Gram Lights 16x7 +42 offset using 195/45 16 tyres... my question is did you get a hard time getting tyres? 195/45/16 is abit out of the ordinary. Usually at Big O Tyres or Ozzy Tyres they usually give you 205/40/16 or 205/45/16. Are the 195/45/16 more expensive than normal?
oh and if you don't mind me asking... where did you order your Gram Lights?
can anyone tell me the formula on how to calculate overall wheel diameter? :confused:
what tyres would suit 15x6.5?
i'm taking a guess 205/50? or 205/45?
15x6.5 = 195/50
16x7 = 195/45
17x7 = 205/40
how about 18"x8 with offset 35? will it fit well?
NO. Ive got 18x7's on my car and they scrub a little.Quote:
how about 18"x8 with offset 35? will it fit well?
With that offset and that width you will be scrubbing a lot.
Pete :)
tried getting a set of 16" last weekend, but the rims wouldn't fit. at first the guy tried 16x6.5(+40) and it scraped the inner edges of front calipers. then we tried 16x7(+38) and it was sticking out by a mile! any recommendations guys? :confused:
im thinking of trying 16x7(+40) and hope this time it fits perfectly.
+40 is the right offset... its normal to scrap the front caliper cos for vtec jazz the brake hub is smaller than the i-dsi one (unless for some rims design wont scrap)... just put a spacer... that will solve the problem....Quote:
Originally Posted by Fizz
so 16x6.5(+40) with a spacer would do the trick? how wide should the spacer be then?
5mm more than enuf.... this doesnt happen on ur car only but for most jazzes outside...Quote:
Originally Posted by Fizz
I run 16x7 with +42 offset and it fits perfectly
jus.. wth ur p1s before..wat offset were those?
mmm I think they were +35...pretty crazy offset but they filled the guards well...
Looked awesome on the car...if only I could have driven it!!!
tried again with the spacers yesterday. with the 3mm it still rubs, with the 5mm it clears the calipers but wheel sticks out abit. and 5mm spacer reduces the amount of thread on the wheel studs, plus its illegal to use them. anyway i guess i'll have to try out a different brand wheel...Quote:
Originally Posted by Zimp13
forgot to mention that the wheel shop gave me the option of machining part of the calipers so that it clears the wheels. would it be advisible to do so? im actually reluctant to machine the calipers coz it might weaken the whole thing.
any idea if 15" +45 offset would fit on the jazz?
Quote:
Originally Posted by jazzydave
yes it should fit perfectly.
but it does depend on the design of the wheels as well.
yeh, the wheels are
Enkei 15inch 4 x100 rims JDM DC2R Style, so should fit?
Quote:
Originally Posted by jazzydave
b aware jdm dc2r rims are 4x114.3
if its copy/replica 4x100, yea it should fit.
+45 offset should be ok... but it really depends on the design of the spokes of the rims. But to be on the safe side buy yourself a pair of 3mm spacers. I had a set of sprint hart 15x6.5 +45 offset and it hit the calipers and i needed 3mm spacers.
i bought Buddyclub Racing II+ instead. 15x7 +35 offset and it fits perfect.. no spacers required.
can you go wider with 7.5"? and 215 tyres? (+40offset)
I've searched all over the forum and I think this is the right place to post - sorry if it is a repost.
I've just bought buddy club 15" x 6.5 +42 and the guy at bob jane tells me that the rims are touching the caliper - something I thought would never happen as I heard any rims with offset 38-42 would fit. Anyone else have the same problems? I see from previous posts that if the rim was wider say 15" x 7 it wouldnt be a problem...
i have the same problem, since using spacers is illegal would sanding down the capliper work?
My wheel is 15x7 +35 offset. +35 is the best offset for 15" and 16" rims.
I had a Sprint Hart CPF-G 15x6.5 +45 offset and i needed 3mm spacers at the front. I sold it and bought myself a proper one.. Buddyclub P1 Racing II+ in 15x7 +35 no problems with callipers or rubbing... perfect rims for the Jazz.
regarding sanding the caliper... i would suggest to think about that aswell. Sometime you can make the caliper week cause the actual metal becomes thin when you sand it down... I rather you get a 3mm spacer than getting your calipers sanded.
If you going to use spacers dont go over 3mm.
yeah but unfortunately these matt black rims require at least 5mm - so no go.
I think it depends on the width of the rims too. A 6.5" rim with +42 offset will not fit whereas a 7" rim width with the same offset will.
as i mentioned elsewhere, mine 15X6.5 offset+38 are perfect, but it all depends on the wheel's spoke design, never ever buy any wheels w/o fitting them on first, making sure everything cleared, that's my best advise ...
can anyone confirm... 17x7.5 45offset will fit?
beej
shud have no problems at the rear, minimal scrapage it there's any, but i doubt it wth +45.
for the front, really need to ask somone who had experience wth the same wheels to b certain. there're too many cases wth the jazz, with perfect offsets, the wheels might still scrape the front calipers.
lol just have to take the gamble hey.. hehehe
Beej, you'd probably will scrap the inner guard in rear if you have 4 people in the car...
I had my 17x7.5 +40 or +42 offset with 215/40 tyres man it was a nightmare...
Try it first Beej, you can always sell it later :D hahaha
hahahaha... i concur..
ill just order them later.. if they fit.. my gain! lol
if not.. a civic/integra lover will want them! hehehe
i'm planning to get 16" volk TE37's.
i'm also going to be installing buddyclub n+ coilovers.
which offset etc. should i be using?
i have an 07 vti-s
will the dc5 type r rims fit on the jazz ok?
no dc5 is 5 stud, jazz is 4
damn.. alright thanks for that
Would there be any issues with Advan RG's 16x7 +40 w/ 205/50 on a facelift model Jazz?
anyone know why 17x7 4x100 for a jazz with 4 people in the car.. when going over a tram rail track it scrap the inner rear?
i thought that spec is perfect on a jazz.. can it be solve by removing any parts of the inner rear?
better specify offset, which is +42 :)
say thanks :P
haha.. cheers xqwzit!
can be solved by grating/cut away the excess tip of the bumper mounting. you can see it clearly.
17x7 +40 will rub, you will need to roll rear guard, then trim some of the rear bumper
im running 16X7 +42 with rear guard rolled and just removed the rear bumper screw and it rubs alittle bit over humps, and i've got stiff susspension too
what tyres are you running, 40s offset i would think rolling your guard is not neccesary.
im running 205/45/16
without passengers it wont rub...but with 4 passengers and stock soft suspension without rolling the guards it will rub
can someone post some pictures of their cars being trim or cut off the excess bit of the inner rear.. so that i can see how much i should remove?
cheers!
if you read my post...i said im running 16X7 +42 lowered running on 205/45/16 and it rubs abit with rolled guard .....doesnt that answer your question already?
sorry to bring up an old thread but i just got a set of 16" x 7 SSR Integral with an offset of 32. Anyone ran their jazz on wheels with such low offset ? thanks btw..my car is on stock suspension.
yes, i have ran 7" off 28+. id suggest you get 205/45/16 or 195/50/16, and you will scrape as mentioned above, front no problem.
15 x 6.5 +38
Can this fit on jazz vtis? i am on 15 x 6.5 +42 now... minor rub.. will they be the same?
Should i go 195/55/15 or 195/50/15 or 205/50/15?
I personally feel like going 205.. but its abit expensive... 195/55/15 is on sale now.
yar i heard about fuel efficient and also speedo problem.. Thanks for the headup.. what about 195/55/15? its on sale.. save about $20 each.. thats abit if u put them all together.
195/50ZR/15s rub with 4 up - stock offset +, stock suspenders.
Well then, I not sure what that funny rubbing/scaping noise is when I have four up and I hit a speed bump - it doesn't occur any other time, and certainly didn't happen with the stock VTI-s mags in place. Nah, I've had another look - slight polish marks on both tyres and guards - must be fairies.
its minor scraping. tyres does hit the stupid excess plastic on the bumper mounting above the tyres where the bumper meets the body. let them tyres grind them out. it'll soon be gone.
6.5J 38+ is super deep flush hehehe.
different brand of tyres do vary in their shapes. some blocky square on the edges some are rounder. if ya know what i mean.
I was just wondering whether a set of 16' x 7 Work emotions with an offset of +44 will fit??? OR will it hit the calipers??
I have a 185/50/15 potenza tyres on my stock jazz 05 vtis.
Would P1 SF challenge rim size be fine on these offset?
15x6.5 +35 4x100
15x6.5 +42 4x100
.....
Mags
Do you know if I can fit 16 X 7 mags with 205/45ZR 16 tyres to my 2004 Jazz, They are 4 studs with a distance of 110mm diagonally apart?