need help for D16Y8 header!

just wondering Xforce header vs DC sport header, which one is better and which one is worth getting it AND AND where can i get them cheap T_T

please share ur knowledge with me =] thanks alot guyS!

Hey, I dont recommend both any for that engine, also if your on a tight budget i would recommend N*Power Stainless 4-2-1 headers from Ebay. Really value for money with almost the same performance. I've got one and my friend has the X-Force, X-force is alot dearer, the other is just simply priced lower different name and does the same job.

But if your just on a spending spree its totally up to you. I would say they about all the same due to engine. IF you want oiwer boost it :) or B swap.

n power, does the job well, although you'll need to customize them to improve their down pipe (add flexijoint)

I've had these for years, good value for money, think 4 years ago I paid $170 delivered

thanks alot guy! that helps alot but question is where can i get N*power header :S cause i cant find it in ebay LOL

does Npower kinda plug and play? or i have to bring it to exhaust shop for it to custome a pipe for it and do i need any high flow cat for it? :S

sorry still new for this T_T

http://cgi.ebay.com.au/CIVIC-EG-EK-C...item2556f6767a
is that the item:S or anyone could help me to find a cheaper one >.<
i got a Simota CAI and S12 Xforce twin lop
and i was planning to change my header all the way to my twinlop any ideas guys? :S

thanks for helping ^^

they're on ebay, at least they used to be hugely popular

you'll need to take it to a muffler shop, upgrading your cat and total line to 2" is very advisable to notice the gains

"http://cgi.ebay.com.au/CIVIC-EG-EK-CRX-1-6-D15-D16-STAINLESS-EXHAUST-HEADER-/160372782714?pt=AU_Car_Parts_Accessories&hash=item 2556f6767a"

do i need any high flow cat?

I run a gtr item, most cats do flow very well

i mean stock cat is alright? all i need is to change the header? cause i have EJ8 atm

I can't say it'll fit stock as when I got the headers I had them cut at the flange to run a flexijoint to the new cat then built a whole new system

I'd just be using one from the muffler shop theyre not overly expensive for a s/s cat

i was just thinking if i can just get the header, then get a high flow cat then connect to my Xforce twinlop exhaust
would that be a good idea?
if so what high flow cat will be good :S
the ebay link i show u, is that the right one?

sounds like it will work as long as all components are the same pipe diameter otherwise your muffler shop will need to throw in some reducers to make up the difference in diameters

you'd be better off getting the headers, the twin loop muffler and going to the workshop with them all and having them throw in a cat and do the piping

i have n*power 4-2-1 header > 2.5" magnaflow cat > 2.5" catback with one hotdog resonator > 2.5" Xforce S12 Twinloop and its a good system

the cat gives off a bit of a buzz - and the entire system is stainless so it does sound a bit tinny - but for a 2.5" on a D series its damn good

i would go 2.25" if u can tho