Hi Guys
I want to get a set of springs for my 2010 cu2 euro.
I want a even drop and not too low , i been reading lot or reviews on tein s tech, where can these be had cheap in Australia?
or any other brand that is as good ?
Eibach, h&r ??
Printable View
Hi Guys
I want to get a set of springs for my 2010 cu2 euro.
I want a even drop and not too low , i been reading lot or reviews on tein s tech, where can these be had cheap in Australia?
or any other brand that is as good ?
Eibach, h&r ??
Best bet is online such as Ebay US for the best prices. Even with the shipping cost, prices are as competitive as the local dealers. A few members here would have had done it.
From experience in my civic, Eibach offers the most comfortable ride and a drop that is not very extreme.
Thank you for reply.
I head that about eibach.
Guess all big 3 are good seems tein drops a bit more than h&r and eibach.
where did you get you springs?
Any pics?
Also does anyone know if springs out of usa will fit aus del cars.
I know they should be same just checking if anyone has any problems.
They are the same double check part numbers though
leaning towards h&r anyone has them?
part numbers?
thank you
Id go eibach purely because of there reputation.
If you want more of a drop get sportline from eibach lower drop then pro kit
Yeah that is too much .... im aiming at max 35mm which is what h&r are.
I just got an eibach prokit from ebay for 360 including shipping a few days ago, its pretty cheap imo
Ray did you install them?
Any pics?
Yee its on my car now, got it installed by a mechanic in sunshine. Ye il post a pic when i get home :)
is the bottom pic standard height?im considering to buy pro kit too
Anyone has these on their CU2?
hi there all, am new to ozhonda and i'm a proud owner of a 2009 CU2 luxury. anyway, to answer 08r3308's query, i did get a set of eibach prokits installed on my cu2. just picked up my car yesterday and am loving the ride height.
will try and post some pics tomorrow.
for those who are keen, i got them pretty cheap from a US based site UltraRev for US$240 plus postage. picked up a set of eibach prokits and a HPS SRI for $620 shipped (postage itsef was about $190).
Hi tino, if you can get some pics that would be great.
Are you still kn stock rims?
We got eibach pro kit in stock @ discounted price
what is the max drop with the eibach pro kit?
anyone have eibach on cu2 apparently they lower 1.6" front and 1.4" back as per jdm yard.
can anyone confirm?
hi dakik
no not yet i want to confirm lowering i don't think eibach will be that low its more like tein s tech lowering specs , im looking at h&r as well 1.3 " all round.
yeah its about $400 shipped from usa
Just springs. Camber will be fine with 30mm lowering