Bonnet on eg seems to hanging over the front bar a bit
Doesn't really line up.
Anyone know if the bonnet can be adjusted back?
Need help asap
Thanks!
Printable View
Bonnet on eg seems to hanging over the front bar a bit
Doesn't really line up.
Anyone know if the bonnet can be adjusted back?
Need help asap
Thanks!
You should be able to loosen the bolts on the bonnet brackets so you can adjust the position.
Its a little tricky by yourself, so grab a mate to give you a hand. :thumbsup:
Cheers manQuote:
Originally Posted by senna
Do you know which bolts to undo?
The ones that hinge it to the car, see if there's some play that can push it up towards the windscreen (like when a bolt goes through an oval hole and can wiggle one way or the other).
should be 2 bolts each side:
http://i10.photobucket.com/albums/a1...524/bonnet.png
^^^ Thats them
Are they the bolts on the actual bonnet on the chassis?
That pic shows them as being on the bonnet
Which one did you mess with? lol
They are bolts on the bonnet. Look at the positions highlighted, you should be able to find them ok.Quote:
Originally Posted by CRXDEL501
Haha haven't touched any yetQuote:
Originally Posted by dougie_504
Been busy doing panel work lol
If they are definitely the ones highlighted I know which they are
i see lots of eg. its actually because the rad support has been bent back.
look at your bonnet and guard. if they line up then its your bar/ rad support
yeah gave it a go this arvo, safe to say thats the case... rad support has been back from what i can see.Quote:
Originally Posted by viinnh
Mine does the same thing but not very noticeable from a small hit in the front