Printable View
Hi all, i have done the search but it seems the jazz gd can take on offset range from 35 to 45. But what i am not sure is the width related to this recommended offset range. At a moment i am looking at two style of wheels
16x7 +44. Work cr kai
17x7 +42 lenso
Will they be ok? Without any body work? I plan to lower the car by 30-35mm soon as well.
Thanks
jazz's can take many offsets. I'm running 16x8 +30 and have no issues, i know of others running 15x8.5 with just a guard roll. To me, i think a 16x7 +35 would be ideal for just lowered springs :)
yeh you will be fine!
i was running 16x7 with 42 offset all round on 205/45 r16 tyres, and lowered a good amount. with no scrub.
also try running both the +42 offset wheels on the back
and both the +44 on the front.
Because the Jazz like a few FWD cars have slight -camber on the back it will help give it a tucked look, and the front has 0 to abit + camber so its safer to put +44 on the fronts because they will stick out less.
always try to run matching offsets so both front are same and then both rear are same.
has anyone ever gone 15x9" on a jazz?
cheers.
you wouldnt do it.
(i wanna see you do it, itll be FAAAAAAAAAAAAAAAAAAAAAAT)
16x9 has been done, ALOT of bodywork was done..and it sits on air
15x8 possible with guards rolled? the car will be lowered of course. lots of stretch tyre too.
whats the offset?
I run 15x8 +15 offset, it sits perfectly flush with the fender with 195/50s and some DIY camber modding. I think the fronts can only take up to +15 on 8 wides before it looks too much.
how is the rear on that setup. from memory the rear needed a somewhat aggresive offset to be flush.
Pics??Quote:
Originally Posted by $BBB
Attachment 23308 That's with +20 offset rear no camberQuote:
Originally Posted by threesix
well that is flush at the top.
looks nice, not my style of wheel though, prefer a racey wheel to the stance look, but gj