Hi guys,
I have a Recaro TS-G fixed seat, planning to chuck it in my ek soon.
Problem is where can i get rails to suit them into an EK chassis? Have browsed around yahoo japan etc and didn't have much luck
Cheers Ozhonda
Printable View
Hi guys,
I have a Recaro TS-G fixed seat, planning to chuck it in my ek soon.
Problem is where can i get rails to suit them into an EK chassis? Have browsed around yahoo japan etc and didn't have much luck
Cheers Ozhonda
does ek9 rails work?
not too sure dude..
only rails that i think that might suit are Bride FG types?
Are they bottom or side mounted seats? If theyre bottom then use ek9/vision lows etc. If side mounted then you can use buddyclub rails etc.
I had someone try to sell me a driver side bc rail for 100. Idk if he still has it but if you want his details pm me!
Would BC rails fit on the TS-G 100%?
PM Sent.
You could use recaro rails or bride, try jdmyard or jdmconcept.
Best to measure the base of your seat, how wide it is from the left side mount bolt hole to the right
Once you have measurements, just email the sellers and ask for dimensions.
http://i2.frsimg.com/images/detailed...c3badefba1.jpg
U should be able to use something like those bride fg's and modify the 4 L brackets to sit wider, closer, tho they should be slightly adjustable
Not a 100% sure. As everyone else stated get your measurements first.Quote:
Originally Posted by Tosies
cheers guys for the replies.
will measure them up asap.
AFAIK semi-bucket = bottom rail. fixed bucket = side rails. so your ts-g will have to use aftermarket ones not ek9.
All good. Bought buddyclub super low rails for a good price, fits good just need to find bolts to bolt the side brackets to the seat.
Anyone know which bolt it is?
From the guy i suggested or someone else? Not too sure about the bolts though.
Yeh the guys at 999 took care of me haha.
Think its M8 bolts, need to check out WDS see if they have anything
Good to hear! Btw let me knw about the swap :)
Yeh no worries dude!
still thinking of what i should do :(
All goods. Take your time :D
sorry for spamming this but does anyone know if i would need to run a seatbelt extender?
if the seats are high on the sides then its likely.
also depends on the rail, if the rails is one of those ones there the base is independant from sliders it means that the bolt to attach the seatbelt buckle might go on the actual base so it wont move with the chair (when going forward or backward)
need pics of the rails to really be sure.
but i remember my fixed back bucket seats being high sided and the seatbelt didnt fit properly because i wasnt fat enough so be large then the sides meaning the belt kind of went from one side of the chair to meet the other (without touching my gut in between).
if the seatbelt bracket is short thought and the buckets have holes for a 4 point/5point mount u could probably throw the latch thorugh that hole to get to the buckle
cheers Gu357.
anyone know where i can grab these bolster/seat belt covers as well?
http://desmond.imageshack.us/Himg21/...pg&res=landing
http://desmond.imageshack.us/Himg96/...pg&res=landing
those recaros look awesome!
if the covers u refer to are recaros check their website.
or try nengun.
They are ASM covers.Quote:
Originally Posted by Tosies